strongSwan

{{title(strongswan.conf Reference)}}

h1. strongswan.conf

bq. *Please note:* This page documents the configuration options of the most current release. Therefore, you should always consult the strongswan.conf(5) man page that comes with the release you are using to confirm which options are actually available.

{{>toc}}

h2. Overview

While the [[IpsecConf|ipsec.conf]] configuration file is well suited to define IPsec related configuration parameters, it is not useful for other strongSwan applications to read options from this file. The file is hard to parse and only [[IpsecStarter|ipsec starter]] is capable of doing so. As the number of components of the strongSwan project is continually growing, we needed a more flexible configuration file that is easy to extend and can be used by all components. Starting with the strongSwan version:4.2.1 release, a default strongswan.conf file is installed in your sysconfdir, e.g. @/etc/strongswan.conf@.

Since version:5.1.2 the default config file is split up and separate files are placed in the [[StrongswanDirectory|/etc/strongswan.d]] directory.

h2. Reloading

The IKE daemon [[charon]] (and some of its derivatives) reloads strongswan.conf if it receives a @SIGHUP@ (this has to be sent manually, [[ipseccommand|ipsec update/reload]] don't send it), or if triggered via [[vici]]'s @reload-settings@ or [[swanctl]]'s @--reload-settings@ commands.  This reloads the [[LoggerConfiguration|logger settings]] and some plugins also support reloading their configuration (e.g. the [[AttrPlugin|attr]], the [[PKCS11plugin|pkcs11]] or the [[EapRadius|eap-radius]] plugins), and many settings are always read directly from the latest config (some at least for new connections).

h2. Syntax

The format consists of hierarchical *sections* and a list of *key/value pairs* in each section.

Each section has a name, followed by C-style curly brackets defining the section body. Each section body contains a set of subsections and key/value pairs:

<pre>

settings := (section|keyvalue)*

section  := name { settings }

keyvalue := key = value\n

</pre>

Values must be terminated by a newline. Comments are possible using the #-character. Section names and keys may contain any printable character except:

<pre>

. , : { } = " # \n \t space

</pre>

An example might look like this:

<pre>

a = b

section-one {

  somevalue = asdf

  subsection {

    othervalue = xxx

  }

  # yei, a comment 

  yetanother = zz

}

section-two {

  x = 12

}

</pre>

Indentation is optional, you may use tabs or spaces.

h3. Referencing other Sections

Since version:5.7.0 it is possible to inherit settings and sections from another section. This feature is mainly useful in [[swanctl.conf]] (which uses the same file format).

The syntax for references is as follows:

<pre>

section    := name : references { settings }

references := absname[, absname]*

absname    := name[.name]*

</pre>

All key/value pairs and all subsections of the referenced sections will be inherited by the section that references them via their absolute name. Values may be overridden in the section or any of its sub-sections (use an empty assignment to clear a value so its default value, if any, will apply). It is currently not possible to limit the inclusion level or clear/remove inherited sub-sections.

If the order is important (e.g. for auth rounds  in  a  connection,  if _round_ is not used), it should be noted that inherited settings/sections will follow those defined in the current section (if multiple sections are referenced, their settings are enumerated left to right).

References  are  evaluated dynamically at runtime, so referring to sections later in the config file or included via other files is no problem.

Here is an example of how this might look like:

<pre>

conn-defaults {

     # default settings for all conns (e.g. a cert, or IP pools)

}

eap-defaults {

     # defaults if eap is used (e.g. a remote auth round)

}

child-defaults {

     # defaults for child configs (e.g. traffic selectors)

}

connections {

     conn-a : conn-defaults, eap-defaults {

          # set/override stuff specific to this connection

          children {

               child-a : child-defaults {

                    # set/override stuff specific to this child

               }

          }

     }

     conn-b : conn-defaults {

          # set/override stuff specific to this connection

          children {

               child-b : child-defaults {

                    # set/override stuff specific to this child

               }

          }

     }

     conn-c : connections.conn-a {

          # everything is inherited, including everything conn-a

          # already inherits from the sections it and its

          # sub-section reference

     }

}

</pre>

h3. Including files

Version version:4.5.1 introduced the *include* statement which allows to include other files into strongswan.conf, e.g.

<pre>

include /some/path/*.conf

</pre>

If the file name is not an absolute path, it is considered to be relative to the directory of the file containing the

include statement. The file name may include shell wildcards. Also, such inclusions can be nested.

Sections loaded from the included files *extend* previously loaded sections; already existing values are *replaced*.

It is important to note that settings are added relative to the section the include statement is in.

As an example, the following three files result in the same final config as the one given above:

<pre>

a = b

section-one {

    somevalue = before include

    include include.conf

}

include other.conf

</pre>

include.conf:

<pre>

# settings loaded from this file are added to section-one

# the following replaces the previous value

somevalue = asdf

subsection {

    othervalue = yyy

}

yetanother = zz

</pre>

other.conf:

<pre>

# this extends section-one and subsection

section-one {

    subsection {

        # this replaces the previous value

        othervalue = xxx

    }

}

section-two {

    x = 12

}

</pre>

h2. Reading values

The config file is read by libstrongswan during library initialization (or when a reload is triggered). Values are accessed using a dot-separated section list and a key: Accessing *section-one.subsection.othervalue* in the examples above will return *xxx*.

Have a look at the settings interface (source:src/libstrongswan/utils/settings.h) to learn about the details.

h2. Defined keys

The following keys are currently defined (using dot notation).

*${sysconfdir}* refers to the directory that can be [[AutoConf|configured]] with the _--sysconfdir_ option (defaults to _${prefix}/etc_).

*${piddir}* refers to the directory that can be [[AutoConf|configured]] with the _--with-piddir_ option (defaults to _/var/run_).

|_<.Key                                             |_<.Default|_<.Description|

|\3(level1). {{h3(aikgen section)}}                 |

|aikgen.load                                        |          |Plugins to load in ipsec aikgen tool.|

|\3(level1). {{h3(attest section)}}                 |

|attest.database                                    |          |File  measurement  information  database  URI.  If it contains a password, make sure to adjust the permissions of the config file accordingly.|

|attest.load                                        |          |Plugins to load in ipsec attest tool.|

|\3(level1). {{h3(charon section)}}                 |

|\3(level2). *Note:* Many of the options in this section also apply to [[charon-cmd]], [[charon-systemd]] and other _charon_ derivatives. Just use their respective name (e.g. _charon-cmd_ instead of _charon_).|

|\3(level3). Defaults for options in this section can be configured in the _libstrongswan_ section.|

|charon.accept_unencrypted_mainmode_messages        |no        |Accept unencrypted ID and HASH payloads in IKEv1 Main Mode. Some implementations send the third Main Mode message unencrypted, probably to find the PSKs for the specified ID for authentication. This is very similar to Aggressive Mode, and has the same security implications: A passive attacker can sniff the negotiated Identity, and start brute forcing the PSK using the HASH payload. It is recommended to keep this option to no, unless you know exactly what the implications are and require compatibility to such devices (for example, some SonicWall boxes).|

|charon.block_threshold                             |5         |Maximum number of half-open IKE_SAs for a single peer IP.|

|charon.cache_crls                                  |no        |Whether Certicate Revocation Lists (CRLs) fetched via HTTP or LDAP should be saved under a unique file name derived from the public key of the Certification Authority (CA) to [[IpsecDirectoryCrls|/etc/ipsec.d/crls]] (stroke) or [[SwanctlDirectory|/etc/swanctl/x509crl]] (vici), respectively.|

|charon.cert_cache                                  |yes       |Whether relations in validated certificate chains should be cached in memory.|

|charon.cisco_unity                                 |no        |Send Cisco Unity vendor ID payload (IKEv1 only), see [[UnityPlugin|unity plugin]].|

|charon.close_ike_on_child_failure                  |no        |Close the IKE_SA if setup of the CHILD_SA along with IKE_AUTH failed.|

|charon.cookie_threshold                            |10        |Number of half-open IKE_SAs that activate the cookie mechanism.|

|charon.crypto_test.bench                           |no        |Benchmark crypto algorithms and order them by efficiency.|

|charon.crypto_test.bench_size                      |1024      |Buffer size used for crypto benchmark.|

|charon.crypto_test.bench_time                      |50        |Time in ms during which crypto algorithm performance is measured.|

|charon.crypto_test.on_add                          |no        |Test crypto algorithms during registration (requires test vectors provided by the _test-vectors_ plugin).|

|charon.crypto_test.on_create                       |no        |Test crypto algorithms on each crypto primitive instantiation.|

|charon.crypto_test.required                        |no        |Strictly require at least one test vector to enable an algorithm.|

|charon.crypto_test.rng_true                        |no        |Whether to test RNG with TRUE quality; requires a lot of entropy.|

|charon.delete_rekeyed                              |no        |Delete CHILD_SAs right after they got successfully rekeyed (IKEv1 only). Reduces the number of stale CHILD_SAs in scenarios with a lot of rekeyings. However, this might cause problems with implementations that continue to use rekeyed SAs until they expire.|

|charon.delete_rekeyed_delay                        |5         |Delay in seconds until inbound IPsec SAs are deleted after rekeyings (IKEv2 only). To process delayed packets the inbound part of a CHILD_SA is kept installed up to the configured number of seconds after it got replaced during a rekeying. If set to 0 the CHILD_SA will be kept installed until it expires (if no lifetime is set it will be destroyed immediately).|

|charon.dh_exponent_ansi_x9_42                      |yes       |Use ANSI X9.42 DH exponent size or optimum size matched to cryptographical strength.|

|charon.dlopen_use_rtld_now                         |no        |Use RTLD_NOW with dlopen() when loading plugins and IMV/IMCs to reveal missing symbols immediately. Useful during development of custom plugins.|

|charon.dns1                                        |          |DNS server assigned to peer via configuration payload (CP), see [[AttrPlugin|attr plugin]].|

|charon.dns2                                        |          |DNS server assigned to peer via configuration payload (CP).|

|charon.dos_protection                              |yes       |Enable Denial of Service protection using cookies and aggressiveness checks.|

|charon.ecp_x_coordinate_only                       |yes       |Compliance with the errata for RFC 4753.|

|charon.filelog                                     |          |Section to define file loggers, see [[LoggerConfiguration]].|

|charon.flush_auth_cfg                              |no        |If enabled objects used during authentication (certificates, identities etc.) are released to free memory once an IKE_SA is established. Enabling this might conflict with plugins that later need access to e.g. the used certificates.|

|charon.follow_redirects                            |yes       |Whether to follow IKEv2 redirects (RFC 5685).|

|charon.fragment_size                               |1280      |Maximum size (complete IP datagram size in bytes) of a sent IKE fragment when using proprietary IKEv1 or standardized IKEv2 fragmentation, defaults to 1280 (use 0 for address family specific default values, which uses a lower value for IPv4). If specified this limit is used for both IPv4 and IPv6.|

|charon.group                                       |          |Name of the [[ReducedPrivileges|group]] the daemon changes to after startup.|

|charon.half_open_timeout                           |30        |Timeout in seconds for connecting IKE_SAs, also see [[JobPriority#IKE_SA_INIT-dropping|IKE_SA_INIT dropping]].|

|charon.hash_and_url                                |no        |Enable hash and URL support.|

|charon.host_resolver.max_threads                   |3         |Maximum number of concurrent resolver threads (they are terminated if unused).|

|charon.host_resolver.min_threads                   |0         |Minimum number of resolver threads to keep around.|

|charon.i_dont_care_about_security_and_use_aggressive_mode_psk|no|If enabled _responders_ are allowed to use IKEv1 Aggressive Mode with pre-shared keys, which is discouraged due to security concerns (offline attacks on the openly transmitted hash of the PSK).|

|charon.ignore_acquire_ts                           |no        |If this is disabled the traffic selectors from the kernel's acquire events, which are derived from the triggering packet, are prepended to the traffic selectors from the configuration for IKEv2 connection. By enabling this, such specific traffic selectors will be ignored and only the ones in the config will be sent. This always happens for IKEv1 connections as the protocol only supports one set of traffic selectors per CHILD_SA.|

|charon.ignore_routing_tables                       |          |A space-separated list of routing tables to be excluded from route lookup.|

|charon.ikesa_limit                                 |0         |Maximum number of IKE_SAs that can be established at the same time before new connection attempts are blocked.|

|charon.ikesa_table_segments                        |1         |Number of exclusively locked segments in the hash table, see [[IkeSaTable|IKE_SA lookup tuning]].|

|charon.ikesa_table_size                            |1         |Size of the IKE_SA hash table, see [[IkeSaTable|IKE_SA lookup tuning]].|

|charon.inactivity_close_ike                        |no        |Whether to close IKE_SA if the only CHILD_SA closed due to inactivity.|

|charon.init_limit_half_open                        |0         |Limit new connections based on the current number of half open IKE_SAs, see [[JobPriority#IKE_SA_INIT-dropping|IKE_SA_INIT dropping]].|

|charon.init_limit_job_load                         |0         |Limit new connections based on the number of jobs currently queued for processing, see [[JobPriority#IKE_SA_INIT-dropping|IKE_SA_INIT dropping]].|

|charon.initiator_only                              |no        |Causes charon daemon to ignore IKE initiation requests.|

|charon.install_routes                              |yes       |Install routes into a separate routing table for established IPsec tunnels. If disabled a more efficient lookup for source and next-hop addresses is used since version:5.5.2.|

|charon.install_virtual_ip                          |yes       |Install virtual IP addresses.|

|charon.install_virtual_ip_on                       |          |The name of the interface on which virtual IP addresses should be installed. If not specified the addresses will be installed on the outbound interface.|

|charon.integrity_test                              |no        |Check daemon, libstrongswan and plugin integrity at startup.|

|charon.interfaces_ignore                           |          |A comma-separated list of network interfaces that should be ignored, if _charon.interfaces_use_ is specified this option has no effect.|

|charon.interfaces_use                              |          |A comma-separated list of network interfaces that should be used by charon. All other interfaces are ignored.|

|charon.keep_alive                                  |20s       |NAT keep alive interval in seconds.|

|charon.leak_detective.detailed                     |yes       |Includes source file names and line numbers in leak detective output.|

|charon.leak_detective.usage_threshold              |10240     |Threshold in bytes for leaks to be reported (0 to report all).|

|charon.leak_detective.usage_threshold_count        |0         |Threshold in number of allocations for leaks to be reported (0 to report all).|

|charon.load                                        |          |Plugins to load in IKEv2 charon daemon, see [[PluginLoad]].|

|charon.load_modular                                |no        |If enabled the list of plugins to load is determined by individual _load_ settings for each plugin, see [[PluginLoad#Modular-Configuration]].|

|charon.make_before_break                           |no        |Initiate IKEv2 reauthentication with a make-before-break instead of a break-before-make scheme. Make-before-break uses overlapping IKE and CHILD_SA during reauthentication by first recreating all new SAs before deleting the old ones. This behavior can be beneficial to avoid connectivity gaps during reauthentication, but requires support for overlapping SAs by the peer. strongSwan can handle such overlapping SAs since version:5.3.0.|

|charon.max_ikev1_exchanges                         |3         |Maximum number of IKEv1 phase 2 exchanges per IKE_SA to keep state about and track concurrently.|

|charon.max_packet                                  |10000     |Maximum packet size accepted by charon.|

|charon.multiple_authentication                     |yes       |Enable multiple authentication exchanges (RFC 4739).|

|charon.nbns1                                       |          |WINS server assigned to peer via configuration payload (CP), see [[AttrPlugin|attr plugin]].|

|charon.nbns2                                       |          |WINS server assigned to peer via configuration payload (CP).|

|charon.port                                        |500       |UDP port used locally. If set to 0 a random port will be allocated.|

|charon.port_nat_t                                  |4500      |UDP port used locally in case of NAT-T. If set to 0 a random port will be allocated. Has to be different from _charon.port_, otherwise a random port will be allocated.|

|charon.prefer_best_path                            |no        |By default, charon keeps SAs on the routing path with addresses it previously used if that path is still usable. By enabling this option, it tries more aggressively to update SAs with MOBIKE on routing priority changes using the cheapest path. This adds more noise, but allows to dynamically adapt SAs to routing priority changes. This option has no effect if MOBIKE is not supported or disabled.|

|charon.prefer_configured_proposals                 |yes       |Prefer locally configured proposals for	IKE/IPsec over supplied ones as	responder (disabling this can avoid keying retries due to INVALID_KE_PAYLOAD notifies).|

|charon.prefer_temporary_addrs                      |no        |By default public IPv6 addresses are preferred over temporary ones (according to RFC 4941), to make connections more stable. Enable this option to reverse this.|

|charon.process_route                               |yes       |Process RTM_NEWROUTE and RTM_DELROUTE events.|

|charon.processor.priority_threads                  |          |Subsection to configure the number of reserved threads per priority class (see [[JobPriority]]).|

|charon.rdn_matching                                |strict    |How RDN(Relative Distinguished Name)s  in  subject DN(Distinguished Name)s of certificates are matched against configured identities. Possible values are _strict_ (the default), _reordered_, and _relaxed_.  With _strict_ the number, type and order of all RDNs has to match, wildcards (*) for the values of RDNs are allowed (that's the case for all three variants). Using _reordered_ also matches DNs if the RDNs appear in a different order, the number and type still has to match. Finally, _relaxed_ also allows matches of DNs that contain more RDNs than the configured identity (missing RDNs are treated like a wildcard match).

              Note that _reordered_ and _relaxed_ impose a considerable overhead on memory usage and runtime, in particular, for mismatches, compared to _strict_.|

|charon.receive_delay                               |0         |Delay in ms for receiving packets, to simulate larger RTT.|

|charon.receive_delay_response                      |yes       |Delay response messages.|

|charon.receive_delay_request                       |yes       |Delay request messages.|

|charon.receive_delay_type                          |0         |Specific IKEv2 message type to delay, 0 for any.|

|charon.replay_window                               |32        |Size of the AH/ESP replay window, in packets.|

|charon.retransmit_base                             |1.8       |Base to use for calculating exponential back off, see [[Retransmission]].|

|charon.retransmit_jitter                           |0         |Maximum jitter in percent to apply randomly to calculated retransmission timeout (0 to disable).|

|charon.retransmit_limit                            |0         |Upper limit in seconds for calculated retransmission timeout (0 to disable).|

|charon.retransmit_timeout                          |4.0       |Timeout in seconds before sending first retransmit.|

|charon.retransmit_tries                            |5         |Number of times to retransmit a packet before giving up.|

|charon.retry_initiate_interval                     |0         |Interval in seconds to use when retrying to initiate an IKE_SA (e.g. if DNS resolution failed), 0 to disable retries.|

|charon.reuse_ikesa                                 |yes       |Initiate CHILD_SA within existing IKE_SAs (always enabled for IKEv1).|

|charon.routing_table                               |220       |Numerical routing table to install routes to.|

|charon.routing_table_prio                          |220       |Priority of the routing table.|

|charon.rsa_pss                                     |no        |Whether to use RSA with PSS padding instead of PKCS#1 padding by default.|

|charon.send_delay                                  |0         |Delay in ms for sending packets, to simulate larger RTT.|

|charon.send_delay_request                          |yes       |Delay request messages.|

|charon.send_delay_response                         |yes       |Delay response messages.|

|charon.send_delay_type                             |0         |Specific IKEv2 message type to delay, 0 for any.|

|charon.send_vendor_id                              |no        |Send strongSwan vendor ID payload.|

|charon.signature_authentication                    |yes       |Whether to enable Signature Authentication as per "RFC 7427":http://tools.ietf.org/html/rfc7427.|

|charon.signature_authentication_constraints        |yes       |If enabled, signature schemes configured in _rightauth_, in addition to getting used as constraints against signature schemes employed in the certificate chain, are also used as constraints against the signature scheme used by peers during IKEv2.|

|charon.spi_label                                   |0x0000000000000000|Value mixed into the local IKE SPIs after applying _spi_mask_.|

|charon.spi_mask                                    |0x0000000000000000|Mask applied to local IKE SPIs before mixing in _spi_label_ (bits set will be replaced with _spi_label_).|

|charon.spi_min                                     |0xc0000000|The lower limit for SPIs requested from the kernel for IPsec SAs. Should not be set lower than 0x00000100 (256), as SPIs between 1 and 255 are reserved	by IANA.|

|charon.spi_max                                     |0xcfffffff|The upper limit for SPIs requested from the kernel for IPsec SAs.|

|charon.start-scripts                               |          |Section containing a list of scripts (name = path) that are executed when the daemon is started.|

|charon.stop-scripts                                |          |Section containing a list of scripts (name = path) that are executed when the daemon is terminated.|

|charon.syslog                                      |          |Section to define syslog loggers, see [[LoggerConfiguration]].|

|charon.threads                                     |16        |Number of worker threads in charon. Several of these are reserved for long running tasks in internal modules and plugins. Therefore, make sure you don't set this value too low. The number of idle worker threads listed in _[[IPsecCommand|ipsec]] statusall_ might be used as indicator on the number of reserved threads ([[JobPriority]] has more on this).|

|charon.user                                        |          |Name of the [[ReducedPrivileges|user]] the daemon changes to after startup.|

|charon.x509.enforce_critical                       |yes       |Discard certificates with unsupported or unknown critical extensions.|

|\3(level2). {{h4(charon.plugins subsection)}}      |

|charon.plugins.addrblock.strict                    |yes       |If enabled, a subject certificate without an "RFC 3779":http://tools.ietf.org/html/rfc3779 address block extension is rejected if the issuer certificate has such an _addrblock_ extension. If disabled, subject certificates issued without _addrblock_ extension are accepted without any traffic selector checks and no policy is enforced by the plugin.|

|charon.plugins.android_log.loglevel                |1         |Loglevel for logging to Android specific logger.|

|charon.plugins.attr                                |          |Section to specify arbitrary attributes that are assigned to a peer via configuration payload, see [[AttrPlugin|attr plugin]].|

|charon.plugins.attr-sql.crash_recovery             |yes       |Release all online leases during startup.  Disable this to share the DB	between multiple VPN gateways.|

|charon.plugins.attr-sql.database                   |          |Database  URI for [[attrsql|attr-sql plugin]] used by charon. If it contains a password, make sure to adjust the permissions  of  the  config file accordingly.|

|charon.plugins.attr-sql.lease_history              |yes       |Enable logging of [[SQL]] IP pool leases.|

|charon.plugins.bliss.use_bliss_b                   |yes       |Use the enhanced BLISS-B key generation and signature algorithm.|

|charon.plugins.bypass-lan.interfaces_ignore        |          |A comma-separated list of network interfaces for which connected subnets should be ignored, if _interfaces_use_ is specified this option has no effect.|

|charon.plugins.bypass-lan.interfaces_use           |          |A comma-separated list of network interfaces for which connected subnets should be considered. All other interfaces are ignored.|

|charon.plugins.certexpire.csv.cron                 |          |Cron style string specifying CSV export times, see [[certexpire]] for details.|

|charon.plugins.certexpire.csv.empty_string         |          |String to use in empty intermediate CA fields.|

|charon.plugins.certexpire.csv.fixed_fields         |yes       |Use a fixed intermediate CA field count.|

|charon.plugins.certexpire.csv.force                |yes       |Force export of all trustchains we have a private key for.|

|charon.plugins.certexpire.csv.format               |%d:%m:%Y  |strftime(3) format string to export expiration dates as.|

|charon.plugins.certexpire.csv.local                |          |strftime(3) format string for the CSV file name to export local certificates to.|

|charon.plugins.certexpire.csv.remote               |          |strftime(3) format string for the CSV file name to export remote certificates to.|

|charon.plugins.certexpire.csv.separator            |,         |CSV field separator.|

|charon.plugins.coupling.file                       |          |File to store coupling list to, see [[CertCoupling|certcoupling plugin]] for details.|

|charon.plugins.coupling.hash                       |sha1      |Hashing algorithm to fingerprint coupled certificates.|

|charon.plugins.coupling.max                        |1         |Maximum number of coupling entries to create.|

|charon.plugins.curl.redir                          |-1        |Maximum number of redirects followed by the plugin, set to 0  to disable following redirects, set to -1 for no limit.|

|charon.plugins.dhcp.force_server_address           |no        |Always use the configured server address, see [[DHCPPlugin|DHCP plugin]] for details.|

|charon.plugins.dhcp.identity_lease                 |no        |Derive user-defined MAC address from hash of IKE identity and send client identity DHCP option.|

|charon.plugins.dhcp.interface                      |          |Interface name the plugin uses for address allocation. The default is to bind to any and let the system decide which way to route the packets to the DHCP server.|

|charon.plugins.dhcp.server                         |255.255.255.255|DHCP server unicast or broadcast IP address.|

|charon.plugins.dhcp.use_server_port                |no        |Use the DHCP server port (67) as source port, instead of the DHCP client port (68), when a unicast server address is configured and the [[DHCPPlugin|DHCP plugin]] acts as relay agent.  When replying in this mode the DHCP server will always send packets to the DHCP server port and if no process binds that port an ICMP	port unreachables will be sent back, which might be problematic for some DHCP servers.  To avoid that, enabling this option will cause the plugin to bind the DHCP server port to send its requests when acting as relay agent. This is not necessary if a DHCP server is already running on the same host and might even cause conflicts (and since the server port is already bound, ICMPs should not be an issue).|

|charon.plugins.dnscert.enable                      |no        |Enable fetching of CERT RRs via DNS.|

|charon.plugins.duplicheck.enable                   |yes       |Enable [[duplicheck]] plugin (if loaded).|

|charon.plugins.duplicheck.socket                   |unix://${piddir}/charon.dck|Socket provided by the [[duplicheck]] plugin.|

|charon.plugins.eap-aka.request_identity            |yes       ||

|charon.plugins.eap-aka-3gpp.seq_check              |          |Enable to activate sequence check of the AKA SQN values in order to trigger resync cycles.|

|charon.plugins.eap-aka-3gpp2.seq_check             |          |Enable to activate sequence check of the AKA SQN values in order to trigger resync cycles.|

|charon.plugins.eap-dynamic.prefer_user             |no        |If enabled, the [[eap-dynamic]] plugin will prefer the order of the EAP methods in an EAP-Nak message sent by a client over the one configured locally.|

|charon.plugins.eap-dynamic.preferred               |          |The preferred EAP method(s) to be used by the [[eap-dynamic]] plugin. If it is not set, the first registered method will be used initially. If a comma separated list is specified, the methods are tried in the given order before trying the rest of the registered methods.|

|charon.plugins.eap-gtc.backend                     |pam       |XAuth backend to be used for credential verification, see [[EapGtc|EAP-GTC]].|

|charon.plugins.eap-peap.fragment_size              |1024      |Maximum size of an EAP-PEAP packet.|

|charon.plugins.eap-peap.max_message_count          |32        |Maximum number of processed EAP-PEAP packets.|

|charon.plugins.eap-peap.include_length             |no        |Include length in non-fragmented EAP-PEAP packets.|

|charon.plugins.eap-peap.phase2_method              |mschapv2  |Phase2 EAP client authentication method.|

|charon.plugins.eap-peap.phase2_piggyback           |no        |Phase2 EAP Identity request piggybacked by server onto TLS Finished message.|

|charon.plugins.eap-peap.phase2_tnc                 |no        |Start phase2 EAP-TNC protocol after successful client authentication.|

|charon.plugins.eap-peap.request_peer_auth          |no        |Request peer authentication based on a client certificate.|

|charon.plugins.eap-radius.accounting               |no        |Enable EAP-RADIUS accounting.|

|charon.plugins.eap-radius.accounting_close_on_timeout|yes     |Close the IKE_SA if there is a timeout during interim RADIUS accounting	updates.|

|charon.plugins.eap-radius.accounting_interval      |0         |Interval in seconds for interim RADIUS accounting updates, if not specified by the RADIUS server in the Access-Accept message.|

|charon.plugins.eap-radius.accounting_requires_vip  |no        |If enabled, accounting is disabled unless an IKE_SA has at least one virtual IP.|

|charon.plugins.eap-radius.accounting_send_class    |no        |If enabled, adds the Class attributes received in Access-Accept message to the RADIUS accounting messages.|

|charon.plugins.eap-radius.class_group              |no        |Use the class attribute sent in the Access-Accept message as group membership information, see [[EapRadius]].|

|charon.plugins.eap-radius.close_all_on_timeout     |no        |Closes all IKE_SAs if communication with the RADIUS server times out. If it is not set only the current IKE_SA is closed.|

|charon.plugins.eap-radius.dae.enable               |no        |Enables support for the Dynamic Authorization Extension (RFC 5176).|

|charon.plugins.eap-radius.dae.listen               |0.0.0.0   |Address to listen for DAE messages from the RADIUS server.|

|charon.plugins.eap-radius.dae.port                 |3799      |Port to listen for DAE requests.|

|charon.plugins.eap-radius.dae.secret               |          |Shared secret used to verify/sign DAE messages.If  set, make sure to adjust the permissions of the config file accordingly.|

|charon.plugins.eap-radius.eap_start                |no        |Send EAP-Start instead of EAP-Identity to start RADIUS conversation.|

|charon.plugins.eap-radius.filter_id                |no        |Use the filter_id attribute sent in the RADIUS-Accept message as group membership if the RADIUS tunnel_type attribute is set to ESP.|

|charon.plugins.eap-radius.forward.ike_to_radius    |          |RADIUS attributes to be forwarded from IKEv2 to RADIUS (can be defined by name or attribute number, a colon can be used to specify vendor-specific attributes, e.g. Reply-Message, or 11, or 36906:12).|

|charon.plugins.eap-radius.forward.radius_to_ike    |          |Same as above but from RADIUS to IKEv2, a strongSwan specific private notify (40969) is used to transmit the attributes.|

|charon.plugins.eap-radius.id_prefix                |          |Prefix to EAP-Identity, some AAA servers use a IMSI prefix to select the EAP method.|

|charon.plugins.eap-radius.nas_identifier           |strongSwan|NAS-Identifier to include in RADIUS messages.|

|charon.plugins.eap-radius.port                     |1812      |Port of RADIUS server (authentication).|

|charon.plugins.eap-radius.retransmit_base          |1.4       |Base to use for calculating exponential back off.|

|charon.plugins.eap-radius.retransmit_timeout       |2.0       |Timeout in seconds before sending first retransmit.|

|charon.plugins.eap-radius.retransmit_tries         |4         |Number of times to retransmit a packet before giving up.|

|charon.plugins.eap-radius.secret                   |          |Shared secret between RADIUS and NAS. If set, make sure to adjust the permissions of the config file accordingly.|

|charon.plugins.eap-radius.server                   |          |IP/Hostname of RADIUS server.|

|charon.plugins.eap-radius.servers                  |          |Section to specify multiple RADIUS servers, see [[EapRadius]]. The _nas_identifier_, _secret_, _sockets_ and _port_ (or _auth_port_) options can be specified for each server. The _retransmit_ settings can also be changed for each server.  A server's IP/Hostname can be configured using the _address_ option. The _acct_port_ [1813] option can be used to specify the port used for RADIUS accounting. For each server a priority can be specified using the _preference_ [0] option.|

|charon.plugins.eap-radius.sockets                  |1         |Number of sockets (ports) to use, increase for high load.|

|charon.plugins.eap-radius.station_id_with_port     |yes       |Whether to include the UDP port in the Called- and Calling-Station-Id RADIUS attributes.|

|charon.plugins.eap-radius.xauth                    |          |Section to configure [[EapRadius#XAuth|multiple XAuth authentication rounds]] via RADIUS.|

|charon.plugins.eap-sim.request_identity            |yes       ||

|charon.plugins.eap-simaka-sql.database             |          ||

|charon.plugins.eap-simaka-sql.remove_used          |          ||

|charon.plugins.eap-tls.fragment_size               |1024      |Maximum size of an EAP-TLS packet.|

|charon.plugins.eap-tls.include_length              |yes       |Include length in non-fragmented EAP-TLS packets.|

|charon.plugins.eap-tls.max_message_count           |32        |Maximum number of processed EAP-TLS packets (0 = no limit).|

|charon.plugins.eap-tnc.max_message_count           |10        |Maximum number of processed EAP-TNC packets (0 = no limit).|

|charon.plugins.eap-tnc.protocol                    |tnccs-2.0 |IF-TNCCS protocol version to be used (tnccs-1.1, tnccs-2.0, tnccs-dynamic).|

|charon.plugins.eap-ttls.fragment_size              |1024      |Maximum size of an EAP-TTLS packet.|

|charon.plugins.eap-ttls.include_length             |yes       |Include length in non-fragmented EAP-TTLS packets.|

|charon.plugins.eap-ttls.max_message_count          |32        |Maximum number of processed EAP-TTLS packets (0 = no limit).|

|charon.plugins.eap-ttls.phase2_method              |md5       |Phase2 EAP client authentication method.|

|charon.plugins.eap-ttls.phase2_piggyback           |no        |Phase2 EAP Identity request piggybacked by server onto TLS Finished message.|

|charon.plugins.eap-ttls.phase2_tnc                 |no        |Start phase2 EAP TNC protocol after successful client authentication.|

|charon.plugins.eap-ttls-phase2_tnc_method          |pt        |Phase2 EAP TNC transport protocol (pt as IETF standard or legacy tnc)|

|charon.plugins.eap-ttls.request_peer_auth          |no        |Request peer authentication based on a client certificate.|

|charon.plugins.error-notify.socket                 |unix://${piddir}/charon.enfy|Socket provided by the [[ErrorNotifyPlugin|error-notify]] plugin.|

|charon.plugins.ext-auth.script                     |          |Shell script to invoke for peer authorization (see [[ext-auth]]).|

|charon.plugins.gcrypt.quick_random                 |no        |Use faster random numbers in gcrypt. *For testing only, produces weak keys!*|

|charon.plugins.ha.autobalance                      |0         |Interval in seconds to automatically balance handled segments between nodes. Set to 0 to disable.|

|charon.plugins.ha.buflen                           |2048      |Buffer size for received HA messages. For IKEv1 the public DH factors are also transmitted so depending on the DH group the HA messages can get quite big (the default should be fine up to _modp4096_).|

|charon.plugins.ha.fifo_interface                   |yes       ||

|charon.plugins.ha.heartbeat_delay                  |1000      ||

|charon.plugins.ha.heartbeat_timeout                |2100      ||

|charon.plugins.ha.local                            |          ||

|charon.plugins.ha.monitor                          |yes       ||

|charon.plugins.ha.pools                            |          ||

|charon.plugins.ha.remote                           |          ||

|charon.plugins.ha.resync                           |yes       ||

|charon.plugins.ha.secret                           |          ||

|charon.plugins.ha.segment_count                    |1         ||

|charon.plugins.ipseckey.enable                     |no        |Enable fetching of IPSECKEY RRs via DNS.|

|charon.plugins.kernel-libipsec.allow_peer_ts       |no        |Allow that the remote traffic selector equals the IKE peer (see [[kernel-libipsec#Host-to-Host-Tunnels|kernel-libipsec]] for details).|

|charon.plugins.kernel-netlink.buflen               |min(PAGE_SIZE, 8192)|Buffer size for received Netlink messages.|

|charon.plugins.kernel-netlink.force_receive_buffer_size|no    |If the maximum Netlink socket receive buffer in bytes set by _receive_buffer_size_ exceeds the system-wide maximum from @/proc/sys/net/core/rmem_max@, this option can be used to override the limit. Enabling this option requires special priviliges (CAP_NET_ADMIN).|

|charon.plugins.kernel-netlink.fwmark               |          |Firewall mark to set on the routing rule that directs traffic to our own routing table. The format is [!]mark[/mask], where the optional exclamation mark inverts the meaning (i.e. the rule only applies to packets that don't match the mark). A possible use case are [[kernel-libipsec#Host-to-Host-Tunnels|host-to-host tunnels with kernel-libipsec]]. When set to _!<mark>_ a more efficient lookup for source and next-hop addresses may also be used since version:5.3.3.|

|charon.plugins.kernel-netlink.mss                  |0         |MSS to set on installed routes, 0 to disable.|

|charon.plugins.kernel-netlink.mtu                  |0         |MTU to set on installed routes, 0 to disable.|

|charon.plugins.kernel-netlink.process_rules        |no        |Whether to process changes in routing rules to trigger roam events. This is currently only useful if the kernel based route lookup is used (i.e. if route installation is disabled or an inverted fwmark match is configured).|

|charon.plugins.kernel-netlink.receive_buffer_size  |0         |Maximum Netlink socket receive buffer in bytes. This value controls how many bytes of Netlink messages can be received on a Netlink socket. The default value is set by @/proc/sys/net/core/rmem_default@. The specified value cannot	exceed the system-wide maximum from @/proc/sys/net/core/rmem_max@, unless _force_receive_buffer_size_ is enabled.|

|charon.plugins.kernel-netlink.roam_events          |yes       |Whether to trigger roam events when interfaces, addresses or routes change.|

|charon.plugins.kernel-netlink.set_proto_port_transport_sa|no  |Whether to set protocol and ports in the selector installed on transport mode IPsec SAs in the kernel. While doing so enforces policies for inbound traffic, it also prevents the use of a single IPsec SA by more than one traffic selector.|

|charon.plugins.kernel-netlink.spdh_thresh          |          |Subsection to configure XFRM policy hashing thresholds for IPv4 and IPv6. The section defines hashing thresholds to configure in the kernel during daemon startup. Each address family takes a threshold for the local subnet of an IPsec policy (src in out-policies, dst in in- and forward-policies) and the remote subnet (dst in out-policies, src in in- and forward-policies).

If the subnet has more or equal net bits than the threshold, the first threshold bits are used to calculate a hash to lookup the policy.

Policy hashing thresholds are not supported before Linux 3.18 and might	conflict with socket policies before Linux 4.8.|

|charon.plugins.kernel-netlink.spdh_thresh.ipv4.lbits|32       |Local subnet XFRM policy hashing threshold for IPv4.|

|charon.plugins.kernel-netlink.spdh_thresh.ipv4.rbits|32       |Remote subnet XFRM policy hashing threshold for IPv4.|

|charon.plugins.kernel-netlink.spdh_thresh.ipv6.lbits|128      |Local subnet XFRM policy hashing threshold for IPv6.|

|charon.plugins.kernel-netlink.spdh_thresh.ipv6.rbits|128      |Remote subnet XFRM policy hashing threshold for IPv6.|

|charon.plugins.kernel-netlink.xfrm_acq_expires     |165       |Lifetime of XFRM acquire state created by the kernel when traffic matches a trap policy. The value gets written to @/proc/sys/net/core/xfrm_acq_expires@. Indirectly controls the delay between XFRM acquire messages triggered by the kernel for a trap policy. The same value is used as timeout for SPIs allocated by the kernel. The default value equals the default total [[Retransmission|retransmission timeout]] for IKE messages (since version:5.5.3 this value is determined dynamically based on the configuration).|

|charon.plugins.kernel-pfkey.events_buffer_size     |0         |Size of the receive buffer for the event socket (0 for default size). Because events are received asynchronously installing e.g. lots of policies may require a larger buffer than the default on certain platforms in order to receive all messages.|

|charon.plugins.kernel-pfkey.route_via_internal     |no        |Whether to use the internal or external interface  in  installed routes. The internal interface is the one where the IP address contained in the local traffic selector is located, the external interface is the one over which the destination address of the IPsec tunnel can be reached. This is not relevant if virtual IPs are  used, for which a TUN device is created that's used in the routes.|

|charon.plugins.kernel-pfroute.vip_wait             |1000      |Time in ms to wait until virtual IP addresses appear/disappear before failing.|

|charon.plugins.led.activity_led                    |          ||

|charon.plugins.led.blink_time                      |50        ||

|charon.plugins.load-tester                         |          |Subsection to configure [[LoadTests|load tests]] using the [[LoadTests|load-tester]] plugin.|

|charon.plugins.lookip.socket                       |unix://${piddir}/charon.lkp|Socket provided by the [[lookip]] plugin.|

|charon.plugins.ntru.max_drbg_requests              |4294967294|Number of pseudo-random bit requests from the DRBG before an automatic reseeding occurs.|

|charon.plugins.ntru.parameter_set                  |optimum   |The following parameter sets are available: x9_98_speed, x9_98_bandwidth, x9_98_balance and optimum, the last set not being part of the X9.98 standard but  having  the best performance.|

|charon.plugins.openssl.engine_id                   |pkcs11    |ENGINE ID to use in the OpenSSL plugin.|

|charon.plugins.openssl.fips_mode                   |0         |Set OpenSSL FIPS mode: disabled (0), enabled (1), Suite B enabled (2). Defaults to the value [[Autoconf#--with-options|configured]] with the _--with-fips-mode_ option.|

|charon.plugins.osx-attr.append                     |yes       |Whether DNS servers are appended to existing entries, instead of replacing them.|

|charon.plugins.pkcs11.load_certs                   |yes       |Whether to load certificates from tokens.|

|charon.plugins.pkcs11.modules                      |          |List of available PKCS#11 modules, see [[SmartCardsIKEv2]].|

|charon.plugins.pkcs11.reload_certs                 |no        |Reload certificates from all tokens if charon receives a SIGHUP.|

|charon.plugins.pkcs11.use_dh                       |no        |Whether the PKCS#11 modules should be used for DH and ECDH.|

|charon.plugins.pkcs11.use_ecc                      |no        |Whether the PKCS#11 modules should be used for ECDH and ECDSA public key operations. ECDSA private keys are used regardless of this option.|

|charon.plugins.pkcs11.use_hasher                   |no        |Whether the PKCS#11 modules should be used to hash data.|

|charon.plugins.pkcs11.use_pubkey                   |no        |Whether the PKCS#11 modules should be used for public key operations, even for keys not stored on tokens.|

|charon.plugins.pkcs11.use_rng                      |no        |Whether the PKCS#11 modules should be used as RNG.|

|charon.plugins.radattr.dir                         |          |Directory where RADIUS attributes are stored in client-ID specific files, see [[RadAttrPlugin|radattr]].|

|charon.plugins.radattr.message_id                  |-1        |RADIUS attributes are added to all IKE_AUTH messages by default (-1), or only to the IKE_AUTH message with the given IKEv2 message ID.|

|charon.plugins.random.random                       |/dev/random|File to read random bytes from.|

|charon.plugins.random.urandom                      |/dev/urandom|File to read pseudo random bytes from.|

|charon.plugins.random.strong_equals_true           |no        |If enabled the RNG_STRONG class reads random bytes from the same source as the RNG_TRUE class.|

|charon.plugins.resolve.file                        |/etc/resolv.conf|File used by the [[resolveplugin|resolve plugin]] to write DNS server entries to.|

|charon.plugins.resolve.resolvconf.iface_prefix     |lo.inet.ipsec.|Prefix used by the [[resolveplugin|resolve plugin]] for interface names sent to resolvconf(8). The name server address is appended to this prefix to make it unique. The result has to be a valid interface name according to the rules defined by resolvconf. Also, it should have a high priority according to the order defined in interface-order(5).|

|charon.plugins.revocation.enable_crl               |yes       |Whether CRL validation should be enabled.|

|charon.plugins.revocation.enable_ocsp              |yes       |Whether OCSP validation should be enabled.|

|charon.plugins.save-keys.esp                       |no        |Whether to save ESP keys.|

|charon.plugins.save-keys.ike                       |no        |Whether to save IKE keys.|

|charon.plugins.save-keys.wireshark_keys            |          |Directory where the keys are stored in the format supported by Wireshark. IKEv1 keys are stored in the _ikev1_decryption_table_ file. IKEv2 keys are stored in the _ikev2_decryption_table_ file. Keys for ESP CHILD_SAs are stored in the _esp_sa_ file.|

|charon.plugins.socket-default.fwmark               |          |Firewall mark to set on outbound packets (a possible use case are [[kernel-libipsec#Host-to-Host-Tunnels|host-to-host tunnels with kernel-libipsec]]).|

|charon.plugins.socket-default.set_source           |yes       |Set source address on outbound packets, if possible.|

|charon.plugins.socket-default.set_sourceif         |no        |Force sending interface on outbound packets, if possible. This allows using IPv6 link-local addresses as tunnel endpoints.|

|charon.plugins.socket-default.use_ipv4             |yes       |Listen on IPv4, if possible.|

|charon.plugins.socket-default.use_ipv6             |yes       |Listen on IPv6, if possible.|

|charon.plugins.sql.database                        |          |Database URI for charon's [[SQL]] plugin. If it contains a password, make sure to adjust the permissions of the config  file  accordingly.|

|charon.plugins.sql.loglevel                        |-1        |Loglevel for logging to [[SQL]] database.|

|charon.plugins.stroke.allow_swap                   |yes       |Analyze addresses/hostnames in _left/right_ to detect which side is local and swap configuration options if necessary. If disabled _left_ is always _local_.|

|charon.plugins.stroke.ignore_missing_ca_basic_constraint|no   |Treat certificates in [[IpsecDirectoryCacerts|ipsec.d/cacerts]] and ipsec.conf [[CASection|ca sections]] as CA certificates even if they don't contain a CA basic constraint.|

|charon.plugins.stroke.max_concurrent               |4         |Maximum number of stroke messages handled concurrently.|

|charon.plugins.stroke.secrets_file                 |${sysconfdir}/ipsec.secrets|Location of the [[ipsec.secrets]] file.|

|charon.plugins.stroke.socket                       |unix://${piddir}/charon.ctl|Socket provided by the stroke plugin.|

|charon.plugins.stroke.timeout                      |0         |Timeout in ms for any stroke command. Use 0 to disable the timeout.|

|charon.plugins.systime-fix.interval                |0         |Interval in seconds to check system time for validity. 0 disables the check. See [[SystimeFixPlugin|systime-fix plugin]].|

|charon.plugins.systime-fix.reauth                  |no        |Whether to use reauth or delete if an invalid cert lifetime is detected.|

|charon.plugins.systime-fix.threshold               |          |Threshold date where system time is considered valid. Disabled if not specified.|

|charon.plugins.systime-fix.threshold_format        |%Y        |strptime(3) format used to parse threshold option.|

|charon.plugins.systime-fix.timeout                 |0s        |How long to wait for a valid system time if an interval is configured. 0 to recheck indefinitely.|

|charon.plugins.tnc-ifmap.client_cert               |          |Path to X.509 certificate file of IF-MAP client.|

|charon.plugins.tnc-ifmap.client_key                |          |Path to private key file of IF-MAP client.|

|charon.plugins.tnc-ifmap.device_name               |          |Unique name of strongSwan server as a PEP and/or PDP device.|

|charon.plugins.tnc-ifmap.renew_session_interval    |150       |Interval in seconds between periodic IF-MAP RenewSession requests.|

|charon.plugins.tnc-ifmap.server_cert               |          |Path to X.509 certificate file of IF-MAP server.|

|charon.plugins.tnc-ifmap.server_uri                |https://localhost:8444/imap|URI of the form <notextile>[https://]servername[:port][/path]</notextile>.|

|charon.plugins.tnc-ifmap.username_password         |          |Credentials of IF-MAP client of the form username:password. If set,  make  sure  to adjust  the permissions of the config file accordingly.|

|charon.plugins.tnc-imc.dlcose                      |yes       |Unload IMC after use.|

|charon.plugins.tnc-imc.preferred_language          |en        |Preferred language for TNC recommendations.|

|charon.plugins.tnc-imv.dlcose                      |yes       |Unload IMV after use.|

|charon.plugins.tnc-imv.recommendation_policy       |default   |TNC recommendation policy, one of _default_, _any_, or _all_.|

|charon.plugins.tnc-pdp.pt_tls.enable               |yes       |Enable PT-TLS protocol on the strongSwan PDP.|

|charon.plugins.tnc-pdp.pt_tls.port                 |271       |PT-TLS server port the strongSwan PDP is listening on.|

|charon.plugins.tnc-pdp.radius.enable               |yes       |Enable RADIUS protocol on the strongSwan PDP.|

|charon.plugins.tnc-pdp.radius.method               |ttls      |EAP tunnel method to be used.|

|charon.plugins.tnc-pdp.radius.port                 |1812      |RADIUS server port the strongSwan PDP is listening on.|

|charon.plugins.tnc-pdp.radius.secret               |          |Shared RADIUS secret between strongSwan PDP and NAS. If set, make  sure  to adjust the permissions of the config file accordingly.|

|charon.plugins.tnc-pdp.server                      |          |Name of the strongSwan PDP as contained in the AAA certificate.|

|charon.plugins.tnc-pdp.timeout                     |          |Timeout in seconds before closing incomplete connections.|

|charon.plugins.tnccs-11.max_message_size           |45000     |Maximum size of a PA-TNC message (XML & Base64 encoding).|

|charon.plugins.tnccs-20.max_batch_size             |65522     |Maximum size of a PB-TNC batch (upper limit via PT-EAP = 65529).|

|charon.plugins.tnccs-20.max_message_size           |65490     |Maximum size of a PA-TNC message (upper limit via PT-EAP = 65497).|

|charon.plugins.tnccs-20.mutual                     |no        |Enable PB-TNC mutual protocol.|

|charon.plugins.tpm.fips_186_4                      |no        |Is the TPM 2.0 FIPS-186-4 compliant, which forces e.g. the use of the default salt length instead of maximum salt length with RSA-PSS padding.|

|charon.plugins.tpm.use_rng                         |no        |Whether the [[TPMPlugin|TPM]] should be used as RNG.|

|charon.plugins.tpm.tcti.name                       |device<notextile>|</notextile>tabrmd|Name of TPM 2.0 TCTI library. Valid values: _tabrmd_, _device_ or _mssim_. Defaults are _device_ if the _/dev/tpmrm0_ in-kernel TPM 2.0 resource manager device exists, and _tabrmd_ otherwise, requiring the D-Bus based TPM 2.0 access broker and resource manager to be available.|

|charon.plugins.tpm.tcti.opts                       |/dev/tpmrm0<notextile>|</notextile><none>|Options for the TPM 2.0 TCTI library. Defaults are _/dev/tpmrm0_ if the	TCTI library name is _device_ and no options otherwise.|

|charon.plugins.unbound.dlv_anchors                 |          |File to read trusted keys for DLV(DNSSEC Lookaside Validation) from. It uses the same format as _trust_anchors_. Only one DLV can be configured, which is then used as a root trusted DLV, this means that it is a lookaside for the root.|

|charon.plugins.unbound.resolv_conf                 |/etc/resolv.conf|File to read DNS resolver configuration from.|

|charon.plugins.unbound.trust_anchors               |/etc/ipsec.d/dnssec.keys|File to read DNSSEC trust anchors from (usually root zone KSK). The format of the file is the standard DNS Zone file format, anchors can be stored as DS or DNSKEY entries in the file.|

|charon.plugins.updown.dns_handler                  |no        |Whether the updown script should handle DNS servers assigned via IKEv1 Mode Config or IKEv2 Config Payloads (if enabled they can't be handled by other plugins, like [[resolveplugin|resolve]]).|

|charon.plugins.vici.socket                         |unix://${piddir}/charon.vici|Socket the [[vici|vici plugin]] serves clients.|

|charon.plugins.whitelist.enable                    |yes       |Enable loaded [[whitelist]] plugin.|

|charon.plugins.whitelist.socket                    |unix://${piddir}/charon.wlst|Socket provided by the whitelist plugin.|

|charon.plugins.wolfssl.fips_mode                   |no        |Enable to prevent loading the plugin if wolfSSL is not in FIPS mode.|

|charon.plugins.xauth-eap.backend                   |radius    |EAP plugin to be used as backend for XAuth credential verification, see [[XAuthEAP]].|

|charon.plugins.xauth-pam.pam_service               |login     |PAM service to be used for authentication, see [[XAuthPAM]].|

|charon.plugins.xauth-pam.session                   |no        |Open/close a PAM session for each active IKE_SA.|

|charon.plugins.xauth-pam.trim_email                |yes       |If an email address is given as an XAuth username, trim it to just the username part.|

|\3(level2). {{h4(charon.imvc subsection)}}         |

|\3(level3). Defaults for options in this section can be configured in the *_libimcv_* section.|

|charon.imcv.assessment_result                      |yes       |Whether IMVs send a standard IETF Assessment Result attribute.|

|charon.imcv.database                               |          |Global IMV policy database URI. If it contains a password, make sure to adjust the permissions of the config file accordingly.|

|charon.imcv.os_info.default_password_enabled       |no        |Manually set whether a default password is enabled.|

|charon.imcv.os_info.name                           |          |Manually set the name of the client OS (e.g. Ubuntu).|

|charon.imcv.os_info.version                        |          |Manually set the version of the client OS (e.g. 12.04 i686).|

|charon.imcv.policy_script                          |ipsec _imv_policy|Script called for each TNC connection to generate IMV policies.|

|\3(level2). {{h4(charon.tls subsection)}}          |

|\3(level3). Defaults for options in this section can be configured in the *_libtls_* section.|

|charon.tls.cipher                                  |          |List of TLS encryption ciphers.|

|charon.tls.key_exchange                            |          |List of TLS key exchange methods.|

|charon.tls.mac                                     |          |List of TLS MAC algorithms.|

|charon.tls.suites                                  |          |List of TLS cipher suites.|

|\3(level2). {{h4(charon.tnc subsection)}}          |

|\3(level3). Defaults for options in this section can be configured in the *_libtnccs_* section.|

|libtnccs.tnc_config                                |/etc/tnc_config|TNC IMC/IMV configuration file.|

|\3(level1). {{h3([[NetworkManager|charon-nm]] section)}}|

|charon-nm.ca_dir                                   |<default> |Directory from which to load CA certificates if no certificate is configured.|

|\3(level1). {{h3([[charon-systemd]] section)}}     |

|charon-systemd.journal                             |          |Section to configure native systemd journal logger, very similar to the syslog logger as described in [[LoggerConfiguration]].|

|\3(level1). {{h3(imv_policy_manager section)}}     |

|imv_policy_manager.command_allow                   |          |Shell command to be executed with recommendation _allow_.|

|imv_policy_manager.command_block                   |          |Shell command to be executed with all other recommendations.|

|imv_policy_manager.database                        |          |Database URI for the database that stores the package information. If it contains a password, make sure to adjust permissions of the config file accordingly.|

|imv_policy_manager.load                            |sqlite    |Plugins to load in IMV policy manager.|

|\3(level1). {{h3(libimcv section)}}                |

|libimcv.debug_level                                |1         |Debug level for a stand-alone libimcv library.|

|libimcv.load                                       |random nonce gmp pubkey x509|Plugins to load in IMC/IMVs with stand-alone libimcv library.|

|libimcv.stderr_quiet                               |no        |Disable the output to stderr with a stand-alone libimcv library.|

|libimcv.swid_gen.command                           |/usr/local/bin/swid_generator|SWID generator command to be executed.|

|libimcv.swid_gen.tag_creator.name                  |strongSwan Project|Name of the tagCreator entity.|

|libimcv.swid_gen.tag_creator.reqid                 |strongswan.org|regid of the tagCreator entity.|

|\3(level1). {{h4(libimcv.plugins subsection)}}     |

|libimcv.plugins.imc-attestation.aik_blob           |          |AIK encrypted private key blob file.|

|libimcv.plugins.imc-attestation.aik_cert           |          |AIK certificate file.|

|libimcv.plugins.imc-attestation.aik_handle         |          |AIK object handle, e.g. 0x81010003.|

|libimcv.plugins.imc-attestation.aik_pubkey         |          |AIK public key file.|

|libimcv.plugins.imc-attestation.mandatory_dh_groups|yes       |Enforce mandatory Diffie-Hellman groups|

|libimcv.plugins.imc-attestation.nonce_len          |20        |DH nonce length.|

|libimcv.plugins.imc-attestation.pcr_info           |no        |Whether to send pcr_before and pcr_after info.|

|libimcv.plugins.imc-attestation.use_quote2         |yes       |Use Quote2 AIK signature instead of Quote signature.|

|libimcv.plugins.imc-attestation.use_version_info   |no        |Version Info is included in Quote2 signature.|

|libimcv.plugins.imc-hcd.push_info                  |yes       |Send quadruple info without being prompted.|

|libimcv.plugins.imc-hcd.subtypes                   |          |Section to define PWG HCD PA subtypes (see [[HCD-IMC]]).|

|libimcv.plugins.imc-hcd.subtypes.<section>         |          |Defines a PWG HCD PA subtype section. Recognized subtype section names are _system_, _control_, _marker_, _finisher_, _interface_ and _scanner_.|

|libimcv.plugins.imc-hcd.subtypes.<section>.<sw_type>|         |Defines a software type section. Recognized software type section names are _firmware_, _resident_application_ and _user_application_.|

|libimcv.plugins.imc-hcd.subtypes.<section>.<sw_type>.<software>||Defines a software section having an arbitrary name.|

|libimcv.plugins.imc-hcd.subtypes.<section>.<sw_type>.<software>.name||Name of the software installed on the hardcopy device.|

|libimcv.plugins.imc-hcd.subtypes.<section>.<sw_type>.<software>.patches||String describing all patches applied to the given software on this hardcopy device. The individual patches are separated by a newline character '\n'.|

|libimcv.plugins.imc-hcd.subtypes.<section>.<sw_type>.<software>.string_version||String describing the version of the given software on this hardcopy device.|

|libimcv.plugins.imc-hcd.subtypes.<section>.<sw_type>.<software>.version||Hex-encoded version string with a length of 16 octets consisting of the fields major version number (4 octets), minor version number (4 octets), build number (4 octets), service pack major number (2 octets) and service pack minor number (2 octets).|

|libimcv.plugins.imc-hcd.subtypes.<section>.attributes_natural_language|en|Variable length natural language tag conforming to RFC 5646 specifies the language to be used in the health assessment message of a given subtype.|

|libimcv.plugins.imc-hcd.subtypes.system.certification_state|  |Hex-encoded certification state.|

|libimcv.plugins.imc-hcd.subtypes.system.configuration_state|  |Hex-encoded configuration state.|

|libimcv.plugins.imc-hcd.subtypes.system.machine_type_model|   |String specifying the machine type and model of the hardcopy device.|

|libimcv.plugins.imc-hcd.subtypes.system.pstn_fax_enabled|no   |Specifies if a PSTN facsimile interface is installed and enabled on the hardcopy device.|

|libimcv.plugins.imc-hcd.subtypes.system.time_source|          |String specifying the hostname of the network time server used by the hardcopy device.|

|libimcv.plugins.imc-hcd.subtypes.system.user_application_enabled|no|Specifies if users can dynamically download and execute applications on the hardcopy device.|

|libimcv.plugins.imc-hcd.subtypes.system.user_application_persistence_enabled|no|Specifies if user dynamically downloaded applications can persist outside the boundaries of a single job on the hardcopy device.|

|libimcv.plugins.imc-hcd.subtypes.system.vendor_name|          |String specifying the manufacturer of the hardcopy device.|

|libimcv.plugins.imc-hcd.subtypes.system.vendor_smi_code|      |Integer specifying the globally unique 24-bit SMI code assigned to the manufacturer of the hardcopy device.|

|libimcv.plugins.imc-os.device_cert                 |          |Manually set the path to the client device certificate (e.g. /etc/pts/aikCert.der)|

|libimcv.plugins.imc-os.device_handle               |          |Manually set handle to a private key bound to a smartcard or TPM (e.g. 0x81010004)|

|libimcv.plugins.imc-os.device_id                   |          |Manually set the client device ID in hexadecimal format (e.g. 1083f03988c9762703b1c1080c2e46f72b99cc31)|

|libimcv.plugins.imc-os.device_pubkey               |          |Manually set the path to the client device public key (e.g. /etc/pts/aikPub.der)|

|libimcv.plugins.imc-os.push_info                   |yes       |Send operating system info without being prompted.|

|libimcv.plugins.imc-scanner.push_info              |yes       |Send open listening ports without being prompted.|

|libimcv.plugins.imc-swima.eid_epoch                |0x11223344|Set 32 bit epoch value for event IDs manually if software collector database is not available.|

|libimcv.plugins.imc-swima.subscriptions            |no        |Accept SW Inventory or SW Events subscriptions.|

|libimcv.plugins.imc-swima.swid_database            |          |URI to  software  collector database containing event timestamps, software creation and deletion events and collected software identifiers. If it contains a password, make sure to adjust the permissions of the config file accordingly.|

|libimcv.plugins.imc-swima.swid_directory           |${prefix}/share|Directory where SWID tags are located.|

|libimcv.plugins.imc-swima.swid_full                |no        |Include file information in the XML-encoded SWID tags.|

|libimcv.plugins.imc-swima.swid_pretty              |no        |Generate XML-encoded SWID tags with pretty indentation.|

|libimcv.plugins.imc-test.additional_ids            |0         |Number of additional IMC IDs.|

|libimcv.plugins.imc-test.command                   |none      |Command to be sent to the Test IMV.|

|libimcv.plugins.imc-test.dummy_size                |0         |Size of dummy attribute to be sent to the Test IMV (0 = disabled).|

|libimcv.plugins.imc-test.retry                     |no        |Do a handshake retry.|

|libimcv.plugins.imc-test.retry_command             |          |Command to be sent to the IMV Test in the handshake retry.|

|libimcv.plugins.imv-attestation.cadir              |          |Path to directory with AIK cacerts.|

|libimcv.plugins.imv-attestation.dh_group           |ecp256    |Preferred Diffie-Hellman group.|

|libimcv.plugins.imv-attestation.hash_algorithm     |sha256    |Preferred measurement hash algorithm.|

|libimcv.plugins.imv-attestation.min_nonce_len      |0         |DH minimum nonce length.|

|libimcv.plugins.imv-attestation.remediation_uri    |          |URI pointing to attestation remediation instructions.|

|libimcv.plugins.imv-os.remediation_uri             |          |URI pointing to operating system remediation instructions.|

|libimcv.plugins.imv-scanner.remediation_uri        |          |URI pointing to scanner remediation instructions.|

|libimcv.plugins.imv-swima.rest_api.timeout         |120       |Timeout of SWID REST API HTTP POST transaction.|

|libimcv.plugins.imv-swima.rest_api.uri             |          |HTTP URI of the SWID REST API.|

|libimcv.plugins.imv-test.rounds                    |0         |Number of IMC-IMV retry rounds.|

|\3(level1). {{h3([[manager]] section)}}            |

|manager.database                                   |          |Credential database URI for manager. If it contains a password, make sure to adjust the permissions of the config file accordingly.|

|manager.debug                                      |no        |Enable debugging in manager.|

|manager.load                                       |          |Plugins to load in manager.|

|manager.socket                                     |          |FastCGI socket of manager, to run it statically.|

|manager.threads                                    |10        |Threads to use for request handling.|

|manager.timeout                                    |15m       |Session timeout for manager.|

|\3(level1). {{h3(mediation client section)}}       |

|medcli.database                                    |          |Mediation client database URI. If it contains a password, make sure to adjust the permissions of the config file accordingly.|

|medcli.dpd                                         |5m        |DPD timeout to use in mediation client plugin.|

|medcli.rekey                                       |20m       |Rekeying time on mediation connections in mediation client plugin.|

|\3(level1). {{h3(mediation server section)}}       |

|medsrv.database                                    |          |Mediation server database URI. If it contains a  password, make sure to adjust the permissions of the config file accordingly.|

|medsrv.debug                                       |no        |Debugging in mediation server web application.|

|medsrv.dpd                                         |5m        |DPD timeout to use in mediation server plugin.|

|medsrv.load                                        |          |Plugins to load in mediation server plugin.|

|medsrv.password_length                             |6         |Minimum password length required for mediation server user accounts.|

|medsrv.rekey                                       |20m       |Rekeying time on mediation connections in mediation server plugin.|

|medsrv.socket                                      |          |Run Mediation server web application statically on socket.|

|medsrv.threads                                     |5         |Number of thread for mediation service web application.|

|medsrv.timeout                                     |15m       |Session timeout for mediation service.|

|\3(level1). {{h3(pki section)}}                    |

|pki.load                                           |          |Plugins to load in ipsec pki tool.|

|\3(level1). {{h3(pool section)}}                   |

|pool.database                                      |          |Database  URI for the database that stores IP pools and configuration attributes. If it contains a password, make sure to adjust the permissions of the config file accordingly.|

|pool.load                                          |          |Plugins to load in ipsec pool tool.|

|\3(level1). {{h3(pt-tls-client section)}}          |

|pt-tls-client.load                                 |          |Plugins to load in ipsec pt-tls-client tool.|

|\3(level1). {{h3(scepclient section)}}             |

|scepclient.load                                    |          |Plugins to load in ipsec scepclient tool.|

|\3(level1). {{h3(sec-updater section)}}            |

|sec-updater.database                               |          |Global IMV policy database URI. If it contains a password, make	sure to adjust the permissions of the config file accordingly.|

|sec-updater.swid_gen.command                       |/usr/local/bin/swid_generator|SWID generator command to be executed.|

|sec-updater.swid_gen.tag_creator.name              |strongSwan Project|Name of the tagCreator entity.|

|sec-updater.swid_gen.tag_creator.regid             |strongswan.org|regid of the tagCreator entity.|

|sec-updater.tnc_manage_command                     |/var/www/tnc/manage.py|strongTNC manage.py command used to import SWID tags.|

|sec-updater.tmp.deb_file                           |/tmp/sec-updater.deb|Temporary storage for downloaded deb package file.|

|sec-updater.tmp.tag_file                           |/tmp/sec-updater.tag|Temporary storage for generated SWID tags.|

|sec-updater.load                                   |           |Plugins to load in sec-updater tool.|

|\3(level1). {{h3(starter section)}}                |

|starter.config_file                                |${sysconfdir}/ipsec.conf|Location of the [[ipsec.conf]] file.|

|starter.load_warning                               |yes       |Show _charon.load_ setting warning, see [[PluginLoad]].|

|\3(level1). {{h3(sw-collector section)}}           |

|sw-collector.database                              |          |URI to software collector database containing event timestamps,	software creation and deletion events and collected software identifiers. If it contains a password, make sure to adjust the permissions of the config file accordingly.|

|sw-collector.first_file                            |/var/log/bootstrap.log|Path pointing to file created when the Linux OS was installed.|

|sw-collector.first_time                            |0000-00-00T00:00:00Z|Time in UTC when the Linux OS was installed.|

|sw-collector.history                               |          |Path pointing to apt history.log file.|

|sw-collector.load                                  |          |Plugins to load in [[swcollector|sw-collector]] tool.|

|sw-collector.rest_api.timeout                      |120       |Timeout of REST API HTTP POST transaction.|

|sw-collector.rest_api.uri                          |          |HTTP URI of the central collector's REST API.|

|\3(level1). {{h3(swanctl section)}}                |

|swanctl.load                                       |          |Plugins to load in [[swanctl]].|

|swanctl.socket                                     |unix://${piddir}/charon.vici|VICI socket to connect to by default.|