General

Profile

Kumar Putta Swamy

  • Registered on: 21.04.2020
  • Last connection: 21.05.2020

Issues

Activity

21.05.2020

01:09 strongSwan Issue #3450: when ipsec.conf is configured with multiple 'conn' , connection to second conn/righid presents ip address from first as the IDr and peer rejects it indicating unknown IDr
Listed below is full details for case where initiator presents wrong IDr
Based on the below we are using different ...
17:30 strongSwan Issue #3450: when ipsec.conf is configured with multiple 'conn' , connection to second conn/righid presents ip address from first as the IDr and peer rejects it indicating unknown IDr
Thanks Tobias.
I tried specifying right for each connection, like below:
conn terminator_10.1.10.10:
right =...

20.05.2020

10:08 strongSwan Issue #3450 (Feedback): when ipsec.conf is configured with multiple 'conn' , connection to second conn/righid presents ip address from first as the IDr and peer rejects it indicating unknown IDr
When we have multiple peers configured as part of ipsec.conf as shown below, have attached the full file as well;
we...
09:50 strongSwan Issue #3419: strongswan initiator/client creates two IKE SAs with same peer
Thanks Tobias.
After we changed the settings to below , we do not see the issue of initiator creating two IKE SAs wi...

21.04.2020

00:24 strongSwan Issue #3419 (Closed): strongswan initiator/client creates two IKE SAs with same peer
strongSwan version: strongSwan 5.6.3, Linux 3.10.105, armv7l
We have a stronSwan client that initiates the IPsec to ...

Also available in: Atom