strongSwan

13.05.2020

04:59 strongSwan Issue #3444 (Feedback): Connection establish but after a period of time, it will be disconnected and only the phase1 connected.

The ipsec connection is connected, but after a period of time, it will be disconnected and unable to connect....

11.05.2020

13:41 strongSwan Issue #3431: Authentication fail and no matching peer config found !!

Tobias Brunner wrote:
> > I can't realize why must assign rightid in ipsec.conf at strongswan, if i want to use the ...

07.05.2020

11:58 strongSwan Issue #3437: IKEV1 use aggressive mode cann't establish success

According to the https://wiki.strongswan.org/projects/strongswan/wiki/FAQ#Aggressive-Mode...

10:22 strongSwan Issue #3437 (Feedback): IKEV1 use aggressive mode cann't establish success

I'm try to test ikev1、ikev2 at main mode and aggressive mode if establish success.
When test ikev1 aggressive mode t...

10:12 strongSwan Issue #3385: buildroot to build strongswan-5.8.1

I solve this issue by using the buildroot strongswan configure and makefile.
Thanks for your support,this issue stat...

10:10 strongSwan Issue #3424: IPSec will disconnect after one night

The root cause is the keylife rekey time set to a invalid value.
Thanks for your support,this issue state can be cha...

06.05.2020

11:32 strongSwan Issue #3436: Use ipsec down <name> and ipsec up <name> command to reload ipsec.conf setting fail.

OK,It's work when use the following step.
1.ipsec down <name>
2.ipsec update
3.ipsec up <name>
Very Thanks fo...

11:07 strongSwan Issue #3436: Use ipsec down <name> and ipsec up <name> command to reload ipsec.conf setting fail.

Yes,ipsec update and reload can use the new config setting.
But,Currently established connections are not affected b...

10:32 strongSwan Issue #3436 (Closed): Use ipsec down <name> and ipsec up <name> command to reload ipsec.conf setting fail.

When ipsec tunnel has established,i try to modify the ipsec.conf setting and then down/up the connection.
But some s...

05.05.2020

10:39 strongSwan Issue #3435: Connection will be crazy rekey and will disconnect after a while.

Tobias Brunner wrote:
> > Is there error setting in the rekey option?
>
> Yes, setting _keylife_ (_lifetime_) to ...