General

Profile

John YU

  • Registered on: 28.01.2019
  • Last connection: 12.08.2020

Issues

Activity

08.08.2020

15:27 strongSwan Issue #3539 (Closed): leftsubnet paramater works abnormally
StrongSwan 5.5.3 on X64
ipsec.conf:
conn ios_ikev2
keyexchange=ikev2
ike=aes256-sha256-modp2048,aes25...

30.05.2020

14:46 strongSwan Issue #3462: VPN client on openwrt connected to VPN server. But can't go through VPN connection.
Tobias Brunner wrote:
> > All the devices connected to this router can't go online now.
> > Previously before I exc...

25.05.2020

15:47 strongSwan Issue #3462: VPN client on openwrt connected to VPN server. But can't go through VPN connection.
Tobias Brunner wrote:
> Only packets with the virtual IP as source address will match the IPsec policies. So you hav...
14:50 strongSwan Issue #3462: VPN client on openwrt connected to VPN server. But can't go through VPN connection.
Tobias Brunner wrote:
> Looks OK. We can't help you further if you don't provide more information (see the link abov...
12:49 strongSwan Issue #3462: VPN client on openwrt connected to VPN server. But can't go through VPN connection.
Tobias Brunner wrote:
> Use @ip route show table 220@ to see the routes installed by storngSwan and not @route@. Als...

23.05.2020

16:39 strongSwan Issue #3462 (Closed): VPN client on openwrt connected to VPN server. But can't go through VPN connection.
Client config: strongswan 5.5.3 on openwrt LEDE X86_64. Official firmware and official software.
ipsec.conf:
<pre...

25.06.2019

13:50 strongSwan Issue #3098 (Closed): How to limit log file size?
I make IKE server running in OpenWRT router. The log file increases quickly and route's small RAM can't store it. So ...

18.06.2019

03:28 strongSwan Issue #3092: If the clients use wifi, his traffic are not calculated
The upload data and download data in bytes. I need to know whether there is unusual high traffic.

15.06.2019

20:35 strongSwan Issue #3092 (Closed): If the clients use wifi, his traffic are not calculated
I set default=1 so that I can see more detailed logs.
But I found that if a client(for example, me) use wifi, his ...

14.06.2019

04:12 strongSwan Issue #3088: Why ipsec status couldn't display windows clients
OK. It seems my fault. Windows clients can now be seen by this command.
I just want to know, is there any solution...

Also available in: Atom