strongSwan

20.12.2019

17:04 strongSwan Feature #433: charon vs. pluto leftsourceip regression

Tobias Brunner wrote:
> > The workaround (setting this address to the loopback device) works, but I need to automate...

23.09.2019

12:24 strongSwan Feature #433: charon vs. pluto leftsourceip regression

I could need this configuration option: leftsourceip=%192.168.x.x
The workaround (setting this address to the loopba...

22.08.2018

16:42 strongSwan Issue #2726: Strongswan selects wrong source IP

My device has a bit different IP addresses than the ones I used to create this issue.
But here you are, the gateway ...

15:58 strongSwan Issue #2726: Strongswan selects wrong source IP

ip route did not show me any misleading routes.
But adding these 2 parameters to strongswan.conf fixes my problem:
...

11:37 strongSwan Issue #2726 (Feedback): Strongswan selects wrong source IP

Using the parameter left=%any works well until there are alias IPs at the interface.
With Linux you can use more th...