General

Profile

Harshal Haridas

Issues

Activity

04.08.2020

20:59 strongSwan Issue #3534: use of strongswan, ipvlan L2 and kernel ipsec
Harshal Haridas wrote:
> We have a situation where we cannot get strongswan and ipsec on a host to work with docker ...
18:49 strongSwan Issue #3534 (New): use of strongswan, ipvlan L2 and kernel ipsec
We have a situation where we cannot get strongswan and ipsec on a host to work with docker containers configured usin...

11.07.2017

01:51 strongSwan Issue #2381 (Closed): 5.2.0: Removing gnuTls from curl plugin for yocto based strongswan implementation
I am starting from a bitbake file located at https://git.congatec.com/yocto/meta-openembedded/blob/778ddba7010febf0b5...

14.04.2017

23:22 strongSwan Issue #2302: drop policy affects interfaces where IP set in "left" is not bound to
Noel Kuntze wrote:
> Harshal Haridas wrote:
> > The IP IP_eth0 is where I want to apply the drop type only while no...
20:39 strongSwan Issue #2302: drop policy affects interfaces where IP set in "left" is not bound to
The policy provided should be only read to be on eth0.
20:38 strongSwan Issue #2302 (Closed): drop policy affects interfaces where IP set in "left" is not bound to
I have a single instance of charon and starter that services 4 independent interfaces. This is on Strongswan 5.2.0
...

14.02.2017

12:18 strongSwan Issue #2249: Unable to parse ipsec.conf file correctly
Thanks. Found out that there were ^M added to the end of line on each line in IPsec.conf file. By removing them, the ...

13.02.2017

23:57 strongSwan Issue #2249: Unable to parse ipsec.conf file correctly
Seems like the formatting did not copy paste well. The conn common and conn common_e do not have a tab (as seen above...
23:52 strongSwan Issue #2249 (Closed): Unable to parse ipsec.conf file correctly
I have two Windriver Linux platforms. When I run using an IPsec.conf file on one platform, it runs correctly and I am...

Also available in: Atom