General

Profile

Ramya R

Issues

Activity

15.02.2019

12:51 strongSwan Issue #2925 (Closed): Certificates with Date above 2038 are not displayed properly
I tried to upload Certificate with "Not After" time as 2040.
But when I execute "ipsec listcacerts" it shows date as...

07.12.2018

10:22 strongSwan Issue #2852 (Closed): Query: A plugin to get the tunnel IP
Hi,
Is there any way (apart from "ipsec statusall") to get the status of tunnel and tunnel IP from strongswan.
...

09.04.2018

12:51 strongSwan Issue #2572: GW triggers both IKE rekey and DPD at the same time , strongswan fails to respond to DPD, resulting in tunnel down.
The issue reported (#379) is regarding strongswan server code. Will the same fix apply for client as well ?
11:33 strongSwan Issue #2572: GW triggers both IKE rekey and DPD at the same time , strongswan fails to respond to DPD, resulting in tunnel down.
I have attached the logs and packet dump , (charon_issue.log & dump_issue.log.pcap).
In the packet dump you can see...

08.04.2018

19:27 strongSwan Issue #2618 (Feedback): Query regarding assignment of Tunnel IP
I have a single strongswan client connected to a strongswan server(IKEV2 mode).
Every time tunnel gets created, the...
19:19 strongSwan Issue #2572: GW triggers both IKE rekey and DPD at the same time , strongswan fails to respond to DPD, resulting in tunnel down.
I'm able to get logs and tcpdump for the issue that happened in the first place.
> The Security Gateway sends t...

16.03.2018

06:46 strongSwan Issue #2572: GW triggers both IKE rekey and DPD at the same time , strongswan fails to respond to DPD, resulting in tunnel down.

> _Looks like that was the case before 5.5.0 (more specifically bb3899739d), but not with the current code base (so...

12.03.2018

13:24 strongSwan Issue #2572: GW triggers both IKE rekey and DPD at the same time , strongswan fails to respond to DPD, resulting in tunnel down.
I tried to reproduce the issue to collect the logs and complete packet capture. I set charon.receive_delay to 10 seco...

01.03.2018

07:07 strongSwan Issue #2572 (Closed): GW triggers both IKE rekey and DPD at the same time , strongswan fails to respond to DPD, resulting in tunnel down.
Hi,
The Security Gateway sends the CREATE_CHILD_SA request and the sent IKE INFORMATIONAL packet(with new spi)....

17.11.2017

06:32 strongSwan Issue #2468: After IKE rekey, DPD is getting triggered as there is no response for the Keep alive messages.
I do not see this issue all the time . I dont have the gateway logs for this instant ..
Do you see any issue in the...

Also available in: Atom