General

Profile

Gerald Turner

Issues

Activity

03.07.2017

19:04 strongSwan Feature #2372: Allow swanctl to read socket from strongswan.conf setting rather than default to hard-coded "unix:///var/run/charon.vici"
Tobias Brunner wrote:
> An alternative would be to introduce a _swanctl.socket_ option that defines a default value ...
18:55 strongSwan Feature #2371: Include ‘/etc/swanctl/conf.d/*.conf’ from ‘/etc/swanctl/swanctl.conf’
Tobias Brunner wrote:
> I agree with the general idea, but swanctl.conf is generated from the swanctl.opt file. So y...

28.06.2017

00:52 strongSwan Feature #2372 (Closed): Allow swanctl to read socket from strongswan.conf setting rather than default to hard-coded "unix:///var/run/charon.vici"
Disclaimer: Rather than waste any scarce brain power, feel free to close this bug report *WONTFIX* immediately ;-)
...
00:49 strongSwan Feature #2371 (Closed): Include ‘/etc/swanctl/conf.d/*.conf’ from ‘/etc/swanctl/swanctl.conf’
I use strongSwan from Debian packages on several hosts and the "/etc/strongswan.d/*.conf split":https://wiki.strongsw...
00:48 strongSwan Feature #2370 (Closed): Install charon-systemd.conf
Several months ago I made the evolutionary jump from stroke to VICI in a systemd environment, and along the road to m...

25.04.2017

20:44 strongSwan Issue #2306: Multiple statically configured subnets ignord, only first subnet used in child SA
Gerald Turner wrote:
> I'll reconfigure for tunnel mode, and restore the git-revert, and then report back.
With c...
19:07 strongSwan Issue #2306: Multiple statically configured subnets ignord, only first subnet used in child SA
Noel Kuntze wrote:
> I'm not sure if I understand the intention in your configuration.
> Are you trying to bump a t...

24.04.2017

20:59 strongSwan Issue #2306 (Closed): Multiple statically configured subnets ignord, only first subnet used in child SA
I have a pair of strongSwan hosts labeled _moon_ and _carol_ (obfuscated), using starter/stroke, configured in transp...

29.07.2013

19:30 strongSwan Feature #366: unity plugin can't handle single SPLIT_INCLUDE attribute containing several subnets
Tested the patch, it works great, thanks Tobias!

26.07.2013

01:25 strongSwan Feature #368 (New): Add support for UNITY_DEF_DOMAIN mode config and pass domain to resolvconf
Hi, my understanding is limited, but from I can tell by comparing debug output between strongSwan and vpnc, strongSwa...

Also available in: Atom