General

Profile

zhonghai li

Issues

Activity

20.09.2019

09:26 strongSwan Issue #3180 (Closed): how to configure one remote ip in passthrough connection
hi,
we have network topology below.
after ipsec tunnel established, all traffic of client go through the tunnel s...

26.08.2019

10:17 strongSwan Issue #3158: error writing to socket: Network is unreachable
hi,
i mean after eth0 up, strongswan can reopen socket or any other method to recover this issue?
zhonghai li
10:11 strongSwan Issue #3158: error writing to socket: Network is unreachable
hi,
could you indicate me which part I should check in HelpRequests.
i find this issue is caused by that I make...

23.08.2019

12:55 strongSwan Issue #3158 (Closed): error writing to socket: Network is unreachable
hi,
i get this issue below. please help.
our local network works well, and we can ping or telnet the host runni...

27.05.2019

11:34 strongSwan Issue #3070: strongswan cannot receive IKE_AUTH message on udp 4500 in nat envrionment
hi,
yes, the responder receives the request and sends the response to the initiator.
and the IKE_AUTH response ...
09:59 strongSwan Issue #3070: strongswan cannot receive IKE_AUTH message on udp 4500 in nat envrionment
hi,
i mean strongswan client cannot get IKE_AUTH response message from SecGW.
zhonghai li
09:57 strongSwan Issue #3070 (Closed): strongswan cannot receive IKE_AUTH message on udp 4500 in nat envrionment
hi,
i make strongswan as IKEv2 client behind NAT device, and another strongswan as IKEv2 SecGW
strongswan clien...

16.05.2019

07:49 strongSwan Issue #3062 (Closed): how to disable rekey caused by byte or packet
hi,
could you indicate me how to disable rekey caused by byte or packet?
I want rekey only caused by time.
does ...

01.11.2018

02:43 strongSwan Issue #2798: charon can't start
This issue was eventually solved by replacing a machine with higher configuration.

25.10.2018

11:01 strongSwan Issue #2798: charon can't start

> No idea. It seems to cause a segmentation fault while importing predefined/static DH parameters (source:src/libst...

Also available in: Atom