strongSwan

h1. Trusted Platform Module 2.0

{{>toc}}

h2. Connect to a TPM 2.0 Device

h3. Install TPM 2.0 Software Stack and Tools

In order to connect to a TPM 2.0 hardware or firmware device a software stack implementing the "TCG TSS 2.0 System Level API":https://trustedcomputinggroup.org/resource/tcg-tss-2-0-system-level-api-sapi-specification/ is needed. An excellent open source "tpm2-tss":https://github.com/tpm2-software/tpm2-tss library is available from the "tpm2-software":https://github.com/tpm2-software project which also offers a set of "tpm2-tools":https://github.com/tpm2-software/tpm2-tools which itself uses the "TCG TSS 2.0 Enhanced System Level API":https://trustedcomputinggroup.org/resource/tcg-tss-2-0-enhanced-system-api-esapi-specification/.

When using the latest *strongswan-5.9.1* version with a *Linux 5.4* kernel or newer, we recommend these latest versions:

* *tpm2-tss* version 3.0.3: https://github.com/tpm2-software/tpm2-tss/releases/tag/3.0.3

* *tpm2-tools* version 5.0: https://github.com/tpm2-software/tpm2-tools/releases/tag/5.0

Support for earlier strongSwan versions and Linux kernels can be found [[TpmPluginOld|here]].

In order to test if we can connect to the TPM 2.0 device we list all persistent keys stored in the Non-Volatile (NV) RAM:

<pre>

tpm2_getcap handles-persistent

- 0x81000001

- 0x81000002

- 0x81010001

</pre>

A manual showing all *tpm2-tools* functions with their arguments can be found "here":https://github.com/tpm2-software/tpm2-tools/tree/5.0/man. The access to the */dev/tpmrm0* TPM resource manager device requires *root* rights on most Linux platforms. But e.g. with Ubuntu, adding the user to the *tss* group enables direct access to the TPM device:

<pre>

sudo usermod -a -G tss <username>

</pre>

h3. Enable the strongSwan tpm Plugin

The strongSwan libtpmtss *tpm* plugin and the TSS2 interface are enabled and built with the following options

  ./configure --enable-tss-tss2 --enable-tpm  ...

With the strongSwan [[IpsecPki|pki]] tool we can now list the persistent key stored under the handle *0x81010001*

<pre>

pki --print --type priv --keyid 0x81010001 --debug 2

</pre>

With debug level 2 some basic information on the TPM device is shown; A second generation Intel firmware TPM running on the Intel Management Engine is employed. Both SHA1 and SHA256 PCR banks are available:

<pre>

TPM 2.0 - manufacturer: INTC (Intel) rev: 01.38 2018 

TPM 2.0 - algorithms: RSA SHA1 HMAC AES MGF1 KEYEDHASH XOR SHA256 RSASSA RSAES RSAPSS OAEP ECDSA ECDH ECDAA ECSCHNORR KDF1_SP800_56A KDF1_SP800_108 ECC SYMCIPHER CTR OFB CBC CFB ECB

TPM 2.0 - ECC curves: NIST_P256 BN_P256

TPM 2.0 - PCR banks: SHA1 SHA256

</pre>

Apparently the analyzed persistent key can be used for encryption only because no signature algorithm is defined:

<pre>

TPM 2.0 via TSS2 v2 available

signature algorithm is NULL with ERROR hash

</pre>

Debug level 2 shows that [[IpsecPki|pki]] extracts the public key from the TPM and converts it into a standard PKCS#1 format:

<pre>

L0 - subjectPublicKeyInfo:

L1 - algorithm:

L2 - algorithmIdentifier:

L3 - algorithm:

  'rsaEncryption'

L1 - subjectPublicKey:

-- > --

L0 - RSAPublicKey:

L1 - modulus:

L1 - publicExponent:

-- < --

</pre>

At the end of the output the fingerprint of the 2048 bit RSA key is listed:

<pre>

  privkey:   RSA 2048 bits

  keyid:     ee:c7:bf:5a:de:0f:11:84:2c:86:2b:69:84:ba:65:b9:81:d2:a9:45

  subjkey:   df:f2:e9:e7:79:98:f0:d2:0b:62:db:c0:5c:2c:eb:45:73:85:e9:79

</pre>

h2. Derive Persistent Endorsement Keys

h3. RSA Endorsement Key

The "tpm2_createek":https://github.com/tpm2-software/tpm2-tools/blob/5.0/man/tpm2_createek.1.md command derives a 2048 bit RSA Endorsement Key (EK) in a deterministic way from the secret _Endorsement Primary Seed_ *unique* to each TPM device and makes the key persistent in the non-volatile memory of the TPM under the object handle *0x81010002*

 tpm2_createek -G rsa -c 0x81010002

Using the "tpm2_getcap":https://github.com/tpm2-software/tpm2-tools/blob/5.0/man/tpm2_getcap.1.md command we can check that the newly derived Endorsement Key has been persisted in the NV RAM

<pre>

tpm2_getcap handles-persistent

- 0x81000001

- 0x81000002

- 0x81010001

- 0x81010002

</pre>

Listing the key properties shows that the 2048 bit Endorsement Key already exists under the handle *0x81010001* analyzed in the previous section

<pre>

pki --print --type priv --keyid 0x81010002

TPM 2.0 via TSS2 v2 available

signature algorithm is NULL with ERROR hash

  privkey:   RSA 2048 bits

  keyid:     ee:c7:bf:5a:de:0f:11:84:2c:86:2b:69:84:ba:65:b9:81:d2:a9:45

  subjkey:   df:f2:e9:e7:79:98:f0:d2:0b:62:db:c0:5c:2c:eb:45:73:85:e9:79

</pre>

h3. Delete Persisted Keys

We therefore delete the duplicate key with the following "tpm2_evictcontrol":https://github.com/tpm2-software/tpm2-tools/blob/5.0/man/tpm2_evictcontrol.1.md command

<pre>

tpm2_evictcontrol -c 0x81010002

persistent-handle: 0x81010002

action: evicted

</pre>

The key removal can be verified with

<pre>

tpm2_getcap handles-persistent

- 0x81000001

- 0x81000002

- 0x81010001

</pre>

h3. ECC Endorsement Key

Again using the "tpm2_createek":https://github.com/tpm2-software/tpm2-tools/blob/5.0/man/tpm2_createek.1.md command we derive a 256 bit ECC Endorsement Key (EK) in a deterministic way from the secret _Endorsement Primary Seed_ *unique* to each TPM device and make the key persistent in the non-volatile memory of the TPM under the object handle *0x81010002*:

 tpm2_createek -G ecc -c 0x81010002 -u ek_ecc.pub

Optionally we saved the public key in a TPM 2.0 proprietary format in the file *ek_ecc.pub*. The fingerprint of the ECC EK private key can be directly displayed with the command

<pre>

pki --print --type priv --keyid 0x81010002

TPM 2.0 via TSS2 v2 available

signature algorithm is NULL with ERROR hash

  privkey:   ECDSA 256 bits

  keyid:     25:db:73:13:0f:c9:c8:91:68:30:8e:02:89:c1:0d:65:bd:ad:69:2a

  subjkey:   9c:b9:fb:b0:32:81:24:82:a7:07:b2:bd:bd:d3:7c:2b:22:7f:74:bf

</pre>

h2. Endorsement Key Certificates

h3. Fetched via URL

Endorsement Key certificates issued for Intel firmware TPMs can be automatically downloaded from an Intel web server using the "tpm2_getcertificate":https://github.com/tpm2-software/tpm2-tools/blob/5.0/man/tpm2_getekcertificate.1.md command:

 tpm2_getekcertificate -o ek_ecc.crt -u ek_ecc.pub

For successful retrieval the public key *ek_ecc.pub* in the TPM 2.0 proprietary format is required. Using the [[IpsecPki|pki]] tool we can list the downloaded EK certificate belonging to the ECC key:

<pre>

pki --print --type x509 --in ek_ecc.crt

  subject:  ""

  issuer:   "C=US, ST=CA, L=Santa Clara, O=Intel Corporation, OU=TPM EK intermediate for CNL_EPID_POST_B1LP_PROD_2 pid:9, CN=www.intel.com"

  validity:  not before Sep 04 02:00:00 2019, ok

             not after  Jan 01 00:59:59 2050, ok (expires in 10600 days)

  serial:    07:99:3b:c6:88:aa:7d:72:b0:24:24:05:09:01:bb:42:55:70:1a:43

  altNames:  tcg-at-tpmManufacturer=id:494E5443, tcg-at-tpmModel=CNL, tcg-at-tpmVersion=id:00020000

  CRL URIs:  https://trustedservices.intel.com/content/CRL/ekcert/CNLEPIDPOSTB1LPPROD2_EK_Device.crl

  certificatePolicies:

             1.2.840.113741.1.5.2.1

             CPS: https://trustedservices.intel.com/content/CRL/ekcert/EKcertPolicyStatement.pdf

  authkeyId: 17:a0:05:75:d0:5e:58:e3:88:12:10:bb:98:b1:04:5b:b4:c3:06:39

  subjkeyId: 9c:b9:fb:b0:32:81:24:82:a7:07:b2:bd:bd:d3:7c:2b:22:7f:74:bf

  pubkey:    ECDSA 256 bits

  keyid:     25:db:73:13:0f:c9:c8:91:68:30:8e:02:89:c1:0d:65:bd:ad:69:2a

  subjkey:   9c:b9:fb:b0:32:81:24:82:a7:07:b2:bd:bd:d3:7c:2b:22:7f:74:bf

</pre>

For the RSA 2048 Endorsement Key we first have to extract the public keyfile *ek_rsa.pub* in the TPM 2.0 proprietary format using the "tpm2_readpublic":https://github.com/tpm2-software/tpm2-tools/blob/5.0/man/tpm2_readpublic.1.md command because we forgot to do this in the first place:

 tpm2_readpublic -Q -c 0x81010001 -o ek_rsa.pub

Now we can retrieve the RSA EK certificate, too:

 tpm2_getekcertificate -o ek_rsa.crt -u ek_rsa.pub

and view the contents with

<pre>

pki --print --type x509 --in ek_rsa.crt

  subject:  ""

  issuer:   "C=US, ST=CA, L=Santa Clara, O=Intel Corporation, OU=TPM EK intermediate for CNL_EPID_POST_B1LP_PROD_2 pid:9, CN=www.intel.com"

  validity:  not before Sep 04 02:00:00 2019, ok

             not after  Jan 01 00:59:59 2050, ok (expires in 10600 days)

  serial:    14:26:0b:eb:12:a2:82:87:af:3b:75:e0:a1:a4:87:60:72:95:55:92

  altNames:  tcg-at-tpmManufacturer=id:494E5443, tcg-at-tpmModel=CNL, tcg-at-tpmVersion=id:00020000

  CRL URIs:  https://trustedservices.intel.com/content/CRL/ekcert/CNLEPIDPOSTB1LPPROD2_EK_Device.crl

  certificatePolicies:

             1.2.840.113741.1.5.2.1

             CPS: https://trustedservices.intel.com/content/CRL/ekcert/EKcertPolicyStatement.pdf

  authkeyId: 17:a0:05:75:d0:5e:58:e3:88:12:10:bb:98:b1:04:5b:b4:c3:06:39

  subjkeyId: df:f2:e9:e7:79:98:f0:d2:0b:62:db:c0:5c:2c:eb:45:73:85:e9:79

  pubkey:    RSA 2048 bits

  keyid:     ee:c7:bf:5a:de:0f:11:84:2c:86:2b:69:84:ba:65:b9:81:d2:a9:45

  subjkey:   df:f2:e9:e7:79:98:f0:d2:0b:62:db:c0:5c:2c:eb:45:73:85:e9:79

</pre>

We can easily check that in both EK certificates the key fingerprints (__keyid__ and __subjkey__) match with those of the EK keys persisted in the TPM.

h3. Stored in Non-Volatile RAM

Most hardware TPMs are shipped with their Endorsement Key Certificates stored in NV RAM. E.g. on an STMicroelectronics TPM device the following data objects are stored in an NV index:

<pre>

tpm2_getcap handles-nv-index

- 0x1410001

- 0x1410002

- 0x1410004

- 0x1880001

- 0x1880011

- 0x1C00002

- 0x1C0000A

- 0x1C00012

- 0x1C10102

- 0x1C10103

- 0x1C10104

- 0x1C101C0

</pre>

Using the "tpm2_nvreadpublic":https://github.com/tpm2-software/tpm2-tools/blob/5.0/man/tpm2_nvreadpublic.1.md command we can look for large data objects which are prime candidates for X.509 certificates:

<pre>

tpm2_nvreadpublic

  ...

0x1c00002:

  name: 000b5c112bd5f410d0abe96a50e94ff721a005c32567e4b1112ab0a8fb7e0289b7f2

  hash algorithm:

    friendly: sha256

    value: 0xB

  attributes:

    friendly: ppwrite|writedefine|write_stclear|ppread|ownerread|authread|no_da|written|platformcreate

    value: 0x1600762

  size: 1033

0x1c0000a:

  name: 000b1948300e66afad594b7a8e8368d53ddd36908fb2b46dd7b5a88051b50e4047ab

  hash algorithm:

    friendly: sha256

    value: 0xB

  attributes:

    friendly: ppwrite|writedefine|write_stclear|ppread|ownerread|authread|no_da|written|platformcreate

    value: 0x1600762

  size: 639

0x1c00012:

  name: 000cde411e123085083eedb1c9312e08dd8d229df6a5e16996035a2e3000d860b372c924de0354a6af4c7886656d2065814f

  hash algorithm:

    friendly: sha384

    value: 0xC

  attributes:

    friendly: ppwrite|writedefine|write_stclear|ppread|ownerread|authread|no_da|written|platformcreate

    value: 0x1600762

  size: 707

  ...

</pre>

We can use [[IpsecPki|pki]] to directly list the properties of the EK certificates:

<pre>

pki --print --type x509 --keyid 0x01c00002

TPM 2.0 via TSS2 v2 available

loaded certificate from TPM NV index 0x01c00002

  subject:  ""

  issuer:   "C=CH, O=STMicroelectronics NV, CN=STM TPM EK Intermediate CA 06"

  validity:  not before Feb 11 01:00:00 2020, ok

             not after  Jan 01 01:00:00 2031, ok (expires in 3650 days)

  serial:    72:78:a1:2c:87:b6:aa:45:c4:1f:57:ff:d1:3d:cf:93:42:34:b9:c9

  altNames:  tcg-at-tpmManufacturer=id:53544D20, tcg-at-tpmModel=ST33HTPHAHD4, tcg-at-tpmVersion=id:00010101

  authkeyId: fb:17:d7:0d:73:48:70:e9:19:c4:e8:e6:03:97:5e:66:4e:0e:43:de

  subjkeyId: e9:3d:51:32:04:42:73:3e:fc:bb:9e:f8:0c:21:9a:53:ec:73:80:94

  pubkey:    RSA 2048 bits

  keyid:     d3:e3:71:79:df:32:53:34:60:0f:1f:38:dc:d4:6d:53:59:1b:c5:3c

  subjkey:   e9:3d:51:32:04:42:73:3e:fc:bb:9e:f8:0c:21:9a:53:ec:73:80:94

</pre>

<pre>

pki --print --type x509 --keyid 0x01c0000a

TPM 2.0 via TSS2 v2 available

loaded certificate from TPM NV index 0x01c0000a

  subject:  ""

  issuer:   "C=CH, O=STMicroelectronics NV, CN=STM TPM ECC Intermediate CA 02"

  validity:  not before Mar 09 01:00:00 2020, ok

             not after  Jan 01 01:00:00 2031, ok (expires in 3650 days)

  serial:    51:e8:fc:b2:64:8d:1d:36:a5:bc:d7:c9:63:c1:d6:de:e7:25:09:a4

  altNames:  tcg-at-tpmManufacturer=id:53544D20, tcg-at-tpmModel=ST33HTPHAHD4, tcg-at-tpmVersion=id:00010101

  authkeyId: 66:2d:8f:1c:ec:df:f1:47:a8:b6:f0:ea:29:6a:f7:f2:4c:ad:f9:cf

  subjkeyId: d1:e8:fc:b2:64:8d:1d:36:a5:bc:d7:c9:63:c1:d6:de:e7:25:09:a4

  pubkey:    ECDSA 256 bits

  keyid:     8b:62:31:bf:08:9d:39:74:6d:05:fd:35:eb:2e:13:64:12:86:03:16

  subjkey:   d1:e8:fc:b2:64:8d:1d:36:a5:bc:d7:c9:63:c1:d6:de:e7:25:09:a4

</pre>

or we can first retrieve the binary certificate blob from the NV RAM using the "tpm2_nvread":https://github.com/tpm2-software/tpm2-tools/blob/5.0/man/tpm2_nvread.1.md command:

 tpm2_nvread 0x01c00012 -C o -o ek_ecc384.crt

and then list the properties of the EK certificate file:

<pre>

pki --print --type x509 --in ek_ecc384.crt 

  subject:  ""

  issuer:   "C=CH, O=STMicroelectronics NV, CN=STM TPM ECC384 Intermediate CA 01"

  validity:  not before Feb 08 01:00:00 2020, ok

             not after  Jan 01 01:00:00 2031, ok (expires in 3650 days)

  serial:    39:ed:ae:d4:89:9e:52:08:9f:42:8a:f5:d5:58:7b:50:a6:24:f3:63

  altNames:  tcg-at-tpmManufacturer=id:53544D20, tcg-at-tpmModel=ST33HTPHAHD4, tcg-at-tpmVersion=id:00010101

  authkeyId: bd:96:3e:9a:d5:74:aa:d9:4f:ad:6c:bf:41:6d:d8:5b:4a:55:99:42

  subjkeyId: b9:ed:ae:d4:89:9e:52:08:9f:42:8a:f5:d5:58:7b:50:a6:24:f3:63

  pubkey:    ECDSA 384 bits

  keyid:     04:68:52:c4:00:ab:10:75:82:57:99:45:1e:7c:12:01:5a:8e:50:c9

  subjkey:   b9:ed:ae:d4:89:9e:52:08:9f:42:8a:f5:d5:58:7b:50:a6:24:f3:63

</pre>

We see that the STMicroelectronics device apparently supports 384 bit ECC keys

<pre>

TPM 2.0 - manufacturer: STM  () rev: 01.38 2018 FIPS 140-2

TPM 2.0 - algorithms: RSA SHA1 HMAC AES MGF1 KEYEDHASH XOR SHA256 SHA384 RSASSA RSAES RSAPSS OAEP ECDSA ECDH ECDAA ECSCHNORR KDF1_SP800_56A KDF1_SP800_108 ECC SYMCIPHER SHA3_256 SHA3_384 CTR OFB CBC CFB ECB

TPM 2.0 - ECC curves: NIST_P256 NIST_P384 BN_P256

TPM 2.0 - PCR banks: SHA1 SHA256

</pre>

h2. Generate Persistent Attestation Keys

h3. RSA Attestation Key

A 2048 bit RSA Attestation Key (AK) bound to the RSA EK with handle *0x81010001* can be created with the "tpm2_createak":https://github.com/tpm2-software/tpm2-tools/blob/5.0/man/tpm2_createak.1.md command:

  tpm2_createak -C 0x81010001 -G rsa -g sha256 -s rsassa -c ak_rsa.ctx -u ak_rsa.pub -n ak_rsa.name

and made persistent under the handle *0x81010003* with the "tpm2_evictcontrol":https://github.com/tpm2-software/tpm2-tools/blob/5.0/man/tpm2_evictcontrol.1.md command:

<pre>

tpm2_evictcontrol -C o -c ak_rsa.ctx 0x81010003

persistent-handle: 0x81010003

action: persisted

</pre>

The properties of the RSA AK which is a signing key can be displayed with the command

<pre>

pki --print --type priv --keyid 0x81010003

TPM 2.0 via TSS2 v2 available

signature algorithm is RSASSA with SHA256 hash

  privkey:   RSA 2048 bits

  keyid:     df:b7:8f:95:61:8f:70:84:f4:03:e8:7e:83:a6:dd:5f:c5:ff:72:b5

  subjkey:   48:82:62:15:74:a2:10:c5:75:70:c2:d6:7d:59:9f:22:d9:4f:9c:07

</pre>

h3. ECC Attestation Key

A 256 bit ECC Attestation Key (AK) bound to the ECC EK with handle *0x81010002* can be created with the "tpm2_createak":https://github.com/tpm2-software/tpm2-tools/blob/5.0/man/tpm2_createak.1.md command:

 tpm2_createak -C 0x81010002 -G ecc -g sha256 -s ecdsa -c ak_ecc.ctx -u ak_ecc.pub -n ak_ecc.name

and made persistent under the handle *0x81010004* with the "tpm2_evictcontrol":https://github.com/tpm2-software/tpm2-tools/blob/5.0/man/tpm2_evictcontrol.1.md command:

<pre>

tpm2_evictcontrol -C o -c ak_ecc.ctx 0x81010004

persistent-handle: 0x81010004

action: persisted

</pre>

The properties of the ECC AK which is a signing key can be displayed with the command

<pre>

pki --print --type priv --keyid 0x81010004

TPM 2.0 via TSS2 v2 available

signature algorithm is ECDSA with SHA256 hash

  privkey:   ECDSA 256 bits

  keyid:     ba:64:37:a4:0e:c8:42:67:8c:55:5a:f9:1b:2a:eb:ff:5f:40:c3:e3

  subjkey:   cc:83:49:87:2b:9e:f3:cb:b8:35:12:02:87:ff:14:89:28:44:a6:04

</pre>

h2. Generate PKCS #10 Certificate Requests

h3. RSA Certificate Request

The [[IpsecPki|pki]] tool can directly generate a *PKCS #10* certificate request self-signed by the TPM 2.0 private key and containing the corresponding public key as well as the desired end entity identity: 

<pre>

pki --req --type priv --keyid 0x81010003 \

    --dn "C=CH, O=strongSec GmbH, OU=AK RSA, CN=edu.strongsec.com" \

    --san edu.strongsec.com --outform pem > ak_rsa_req.pem

TPM 2.0 via TSS2 v2 available

signature algorithm is RSASSA with SHA256 hash

Smartcard PIN: <return>

</pre>

Since we didn't configure a password when creating the AK, just press <return> when prompted for the PIN. With *openssl* we can verify the contents of the generated certificate request:

<pre>

openssl req -in ak_rsa_req.pem -noout -text

Certificate Request:

    Data:

        Version: 1 (0x0)

        Subject: C = CH, O = strongSec GmbH, OU = AK RSA, CN = edu.strongsec.com

        Subject Public Key Info:

            Public Key Algorithm: rsaEncryption

                RSA Public-Key: (2048 bit)

                Modulus:

                    00:9e:cc:3c:be:0a:37:86:db:ab:a5:01:49:a4:be:

                    0f:10:0e:32:50:12:27:64:52:85:0f:21:5e:c7:14:

                    f4:d9:7f:95:0a:22:91:73:9f:60:07:45:d3:8e:4b:

                    6d:94:00:83:44:ed:9c:f2:c0:14:9c:33:01:46:d0:

                    78:e4:10:ae:51:3a:9c:c2:b7:a0:c7:04:66:80:bb:

                    c2:bc:02:5b:d6:de:da:93:98:de:a7:cd:a5:5d:c1:

                    8a:bb:13:8b:d9:21:88:c0:61:40:d2:30:eb:0d:dd:

                    63:8d:a4:e0:b0:1a:bb:18:7f:6e:62:e1:bf:b3:39:

                    fa:c2:80:32:88:6a:da:f0:24:90:5c:16:b6:bb:30:

                    5d:96:25:24:cf:f2:03:19:0f:56:58:f2:32:00:51:

                    8b:0a:c3:15:81:db:34:ee:a4:64:5b:b6:3c:e6:d3:

                    df:e3:16:80:07:0e:13:91:4d:18:9c:b3:fd:ca:72:

                    78:72:56:e9:13:4c:1d:a2:03:f0:e1:8d:cd:54:1c:

                    68:ea:46:47:1c:f9:f9:97:7a:f1:59:96:58:6c:d8:

                    8e:a9:15:fc:4d:93:5d:fa:51:5d:33:5a:bb:77:59:

                    18:3e:6b:f6:45:f7:92:c2:12:0a:bb:64:af:0b:ff:

                    0d:08:7a:18:90:d9:10:63:b1:6a:19:78:da:9d:ab:

                    7a:87

                Exponent: 65537 (0x10001)

        Attributes:

        Requested Extensions:

            X509v3 Subject Alternative Name: 

                DNS:edu.strongsec.com

    Signature Algorithm: sha256WithRSAEncryption

         35:89:16:59:fc:ab:64:a9:a1:89:cc:d0:e6:a9:06:19:e1:5e:

         11:98:20:ea:ca:f0:5f:06:3c:11:ff:72:98:96:92:08:91:68:

         d8:bd:e6:05:ed:ef:49:cf:22:6d:da:ab:2c:10:a7:df:59:a3:

         0e:e4:bf:f6:8a:62:0b:28:eb:62:89:d0:50:d0:df:2f:5a:2d:

         39:c6:7b:ac:34:6c:85:93:be:0d:9b:70:15:47:73:2f:00:da:

         52:e3:65:c2:02:f9:88:0f:b8:f5:24:dc:db:43:15:fe:bc:8c:

         98:96:81:aa:6d:aa:4c:6e:38:a2:89:27:5c:8d:27:5d:16:1a:

         fa:3b:e7:81:69:58:db:a9:9a:c7:ea:06:d2:1c:13:ba:ee:92:

         a4:8a:64:e3:5f:19:2c:d3:54:4f:3c:da:52:fc:9a:35:72:5c:

         a9:d4:93:7c:e3:69:08:2b:fb:4e:35:84:7e:e3:eb:95:86:2e:

         5b:e5:01:c1:69:53:86:f9:6b:38:31:83:97:76:8b:ba:3d:9c:

         28:5b:84:b0:9b:e9:91:8b:db:9e:4d:3b:03:db:f4:84:a6:8d:

         b2:18:9f:3a:3e:f9:36:64:15:98:4f:69:37:6b:9e:b2:92:a0:

         9c:ab:05:35:65:28:b8:df:92:4b:fe:d1:40:6d:05:e2:4f:4e:

         75:15:8c:22

</pre>

h3. ECC Certificate Request

We repeat the same for the ECC Attestation Key:

<pre>

pki --req --type priv --keyid 0x81010004 \

    --dn "C=CH, O=strongSec GmbH, OU=AK ECC, CN=edu.strongsec.com" \

    --san edu.strongsec.com --outform pem > ak_ecc_req.pem

TPM 2.0 via TSS2 v2 available

signature algorithm is ECDSA with SHA256 hash

Smartcard PIN: <return>

</pre>

and verify that the certificate request has been self-signed by the ECC AK private-key:

<pre>

openssl req -in ak_ecc_req.pem -noout -text

Certificate Request:

    Data:

        Version: 1 (0x0)

        Subject: C = CH, O = strongSec GmbH, OU = AK ECC, CN = edu.strongsec.com

        Subject Public Key Info:

            Public Key Algorithm: id-ecPublicKey

                Public-Key: (256 bit)

                pub:

                    04:80:e7:cd:47:9e:c7:71:08:98:82:22:ed:99:1f:

                    40:50:bd:44:da:a1:ca:ac:0b:e2:13:7f:f3:ae:63:

                    99:61:74:a2:b6:15:ae:5c:27:9e:bd:f2:27:91:95:

                    d1:ee:8f:99:93:ca:7b:4e:4e:87:a1:00:9e:94:24:

                    b1:13:d1:11:2c

                ASN1 OID: prime256v1

                NIST CURVE: P-256

        Attributes:

        Requested Extensions:

            X509v3 Subject Alternative Name: 

                DNS:edu.strongsec.com

    Signature Algorithm: ecdsa-with-SHA256

         30:46:02:21:00:a0:3a:98:28:79:4b:bf:bd:90:92:d0:86:a2:

         69:34:9c:61:6b:87:8e:d0:30:8b:69:b0:94:bd:20:1a:c2:d8:

         e8:02:21:00:8e:e1:3d:5a:84:69:a1:dc:eb:c3:68:7d:80:7c:

         3b:73:c8:40:08:a2:88:56:94:03:9f:49:52:60:40:a1:9a:9f

</pre>

h2. Issuing Attestion Key Certificates

h3. Certification Authority

X.509 end entity certificates have to be signed by an in-house or official external __Certification Authority__ (CA). In our example we are using the *strongSec 2016 Root CA* which was generated in 2016 with the [[IpsecPki|pki]] command

<pre>

pki --gen --type rsa --size 4096 --outform pem > cakey.pem

</pre>

creating a 4096 bit RSA key pair and then creating a self-signed CA certificate with a lifetime of 10 years

<pre>

pki --self --ca --type rsa --in cakey.pem --dn="C=CH, O=strongSec GmbH, CN=strongSec 2016 Root CA" --lifetime 3652 --outform pem > cacert.pem

</pre>

as the following listing shows:

<pre>

pki --print --type x509 --in cacert.pem 

  subject:  "C=CH, O=strongSec GmbH, CN=strongSec 2016 Root CA"

  issuer:   "C=CH, O=strongSec GmbH, CN=strongSec 2016 Root CA"

  validity:  not before Sep 02 10:25:01 2016, ok

             not after  Sep 02 10:25:01 2026, ok (expires in 2067 days)

  serial:    7c:24:43:4b:b7:dc:ef:7e

  flags:     CA CRLSign self-signed 

  subjkeyId: 6d:c2:af:37:49:41:b9:fd:f4:45:8b:aa:e0:03:3b:b9:e5:7b:9c:b5

  pubkey:    RSA 4096 bits

  keyid:     6c:79:f3:7a:b0:df:ac:69:03:b2:ac:6a:ed:82:3a:d2:66:93:b1:21

  subjkey:   6d:c2:af:37:49:41:b9:fd:f4:45:8b:aa:e0:03:3b:b9:e5:7b:9c:b5

</pre>

h3. RSA Attestation Key Certificate

The PKCS #10 certificate request exported from the TPM is used to generate an RSA Attestation Key certificate signed by the Root CA:

<pre>

pki --issue --cacert cacert.pem --cakey cakey.pem -type pkcs10 --in ak_rsa_req.pem --dn "C=CH, O=strongSec GmbH, OU=AK RSA, CN=edu.strongsec.com" --san "edu.strongsec.com" --crl http://www.strongsec.com/ca/strongsec.crl --flag serverAuth --lifetime 1827 > ak_rsa_cert.der

</pre>

having the following content

<pre>

pki --print --type x509 --in ak_rsa_cert.der 

  subject:  "C=CH, O=strongSec GmbH, OU=AK RSA, CN=edu.strongsec.com"

  issuer:   "C=CH, O=strongSec GmbH, CN=strongSec 2016 Root CA"

  validity:  not before Dec 23 15:26:22 2020, ok

             not after  Dec 23 15:26:22 2025, ok (expires in 1825 days)

  serial:    79:e5:74:2f:a4:df:b8:d2

  altNames:  edu.strongsec.com

  flags:     serverAuth 

  CRL URIs:  

  authkeyId: 6d:c2:af:37:49:41:b9:fd:f4:45:8b:aa:e0:03:3b:b9:e5:7b:9c:b5

  subjkeyId: 48:82:62:15:74:a2:10:c5:75:70:c2:d6:7d:59:9f:22:d9:4f:9c:07

  pubkey:    RSA 2048 bits

  keyid:     df:b7:8f:95:61:8f:70:84:f4:03:e8:7e:83:a6:dd:5f:c5:ff:72:b5

  subjkey:   48:82:62:15:74:a2:10:c5:75:70:c2:d6:7d:59:9f:22:d9:4f:9c:07

</pre>

h3. ECC Attestation Key Certificate

The second PKCS #10 certificate request exported from the TPM is used to generate an ECC Attestation Key certificate signed by the Root CA:

<pre>

pki --issue --cacert cacert.pem --cakey cakey.pem -type pkcs10 --in ak_rsa_req.pem --dn "C=CH, O=strongSec GmbH, OU=AK ECC, CN=edu.strongsec.com" --san "edu.strongsec.com" --crl http://www.strongsec.com/ca/strongsec.crl --flag serverAuth --lifetime 1827 > ak_rsa_cert.der

</pre>

having the following content

<pre>

pki --print --type x509 --in ak_ecc_cert.der 

  subject:  "C=CH, O=strongSec GmbH, OU=AK ECC, CN=edu.strongsec.com"

  issuer:   "C=CH, O=strongSec GmbH, CN=strongSec 2016 Root CA"

  validity:  not before Dec 23 15:27:40 2020, ok

             not after  Dec 23 15:27:40 2025, ok (expires in 1825 days)

  serial:    65:fd:5b:98:47:11:f6:45

  altNames:  edu.strongsec.com

  flags:     serverAuth 

  CRL URIs:  http://www.strongsec.com/ca/strongsec.crlq

  authkeyId: 6d:c2:af:37:49:41:b9:fd:f4:45:8b:aa:e0:03:3b:b9:e5:7b:9c:b5

  subjkeyId: cc:83:49:87:2b:9e:f3:cb:b8:35:12:02:87:ff:14:89:28:44:a6:04

  pubkey:    ECDSA 256 bits

  keyid:     ba:64:37:a4:0e:c8:42:67:8c:55:5a:f9:1b:2a:eb:ff:5f:40:c3:e3

  subjkey:   cc:83:49:87:2b:9e:f3:cb:b8:35:12:02:87:ff:14:89:28:44:a6:04

</pre>

h3. Storing Certificates in the TPM 2.0 NV RAM 

A TPM 2.0 has a certain amount of Non Volatile Random Access Memory (NV RAM) that can be used to store arbitrary data, e.g. the X.509 certificates matching the persistent keys. IF both the certificates and keys are persisted in the TPM then the system disk of the host can be reformatted at any time without loosing the machine or user credentials.As with smartcards the needed amount of memory must be reserved first so we check the size of the X.509 ECC certificate

<pre>

ls -l ak_ecc_cert.der 

-rw-rw-r-- 1 andi andi 1001 Dez 23 15:31 ak_ecc_cert.der

</pre>

We then define a memory location with a size of 449 bytes that can be accessed via the handle 0x01800004 which is also called the NV index

<pre>

tpm2_nvdefine 0x01800004 -C o -s 1001 -a 0x2000A

nv-index: 0x1800004

</pre>

Then we write the certificate file to the NV RAM destination

<pre>

tpm2_nvwrite 0x01800004 -C o -i ak_ecc_cert.der

</pre>

h2. Remove NV Index

The memory assigned to a given NV index can be released with the command

<pre>

tpm2_nvrelease -x 0x01800001 -a 0x40000001

</pre>

h2. Configure TPM Private Key Access via VICI Interface

Configuration of TPM private key access as tokens in the secrets section of *swanctl.conf*

 secrets {

    token_ak_rsa {

       handle = 81010002

       pin = 123456

    }

    token_ak_ecc {

       handle = 81010004

    }

}

Since the use of the RSA AK private key is password-protected, the PIN *123456* is added.

h2. Define IPsec Connection with RSA AK Client Key

This connection configuration in *swanctl.conf* uses the RSA AK certificate for client authentication

<pre>

connections {

   rsa {

      local_addrs  = 10.10.0.105

      remote_addrs = 10.10.0.104

      local {

         auth = pubkey 

         certs = raspi5_ak_rsa_Cert.der

      }

      remote {

         auth = pubkey 

         id = raspi4.example.com

      }

      children {

         rsa {

            mode = transport

            esp_proposals = aes128-sha256-curve25519

         }

      }

      version = 2

      proposals = aes128-sha256-curve25519

   }

}

</pre>

h2. Define IPsec Connection with ECC AK Client Key

This connection configuration in *swanctl.conf* references the ECC AK certificate used for client authentication via its handle, i.e. the NV index

<pre>

connections {

   ecc {

      local_addrs  = 10.10.0.105

      remote_addrs = 10.10.0.104

      local {

         auth = pubkey

         cert-tpm {

            handle = 0x01800004

         }

      }

      remote {

         auth = pubkey

         id = raspi4.example.com

      }

      children {

         ecc {

            mode = transport

            esp_proposals = aes128-sha256-curve25519

         }

      }

      version = 2

      proposals = aes128-sha256-curve25519

   }

}

</pre>

h2. Starting the strongSwan Daemon

<pre>

systemctl start strongswan-swanctl

</pre>

<pre>

Feb 19 10:52:01 raspi5 systemd[1]: Starting strongSwan IPsec IKEv1/IKEv2 daemon using swanctl...

Feb 19 10:52:01 raspi5 charon-systemd[21165]: loaded plugins: charon-systemd charon-systemd random nonce x509 constraints openssl pem pkcs1 pkcs8 pkcs12 pubkey mgf1 ntru curve25519 eap-identity eap-ttls eap-tnc tnc-tnccs tnc-imc tnccs-20 socket-default kernel-netlink vici tpm

Feb 19 10:52:01 raspi5 charon-systemd[21165]: spawning 16 worker threads

Feb 19 10:52:01 raspi5 charon-systemd[21165]: loaded certificate 'C=US, O=TNC Demo, OU=AIK RSA, CN=raspi5.example.com'

Feb 19 10:52:01 raspi5 charon-systemd[21165]: loaded certificate 'C=US, O=TNC Demo, CN=TNC Demo CA'

</pre>

The RSA AK private key is attached to the *charon-systemd* daemon via the TPM 2.0 resource manager

<pre>

Feb 19 10:52:01 raspi5 charon-systemd[21165]: TPM 2.0 - manufacturer: IFX (SLB9670) rev: 01.16 2015

Feb 19 10:52:01 raspi5 charon-systemd[21165]: TPM 2.0 - algorithms: RSA SHA1 HMAC AES KEYEDHASH XOR SHA256 RSASSA RSAES RSAPSS OAEP ECDSA ECDH SM2 KDF1_SP800_56A KDF1_SP800_108 ECC SYMCIPHER CFB

Feb 19 10:52:01 raspi5 charon-systemd[21165]: TPM 2.0 - ECC curves: NIST_P256 BN_P256

Feb 19 10:52:01 raspi5 charon-systemd[21165]: TPM 2.0 via TSS2 v2 available

Feb 19 10:52:01 raspi5 charon-systemd[21165]: AIK signature algorithm is RSASSA with SHA256 hash

Feb 19 10:52:01 raspi5 charon-systemd[21165]: loaded RSA private key from token

F</pre>

The ECC AK private key is attached to the *charon-systemd* daemon via the TPM 2.0 resource manager

<pre>

Feb 19 10:52:01 raspi5 charon-systemd[21165]: TPM 2.0 - manufacturer: IFX (SLB9670) rev: 01.16 2015

Feb 19 10:52:01 raspi5 charon-systemd[21165]: TPM 2.0 - algorithms: RSA SHA1 HMAC AES KEYEDHASH XOR SHA256 RSASSA RSAES RSAPSS OAEP ECDSA ECDH SM2 KDF1_SP800_56A KDF1_SP800_108 ECC SYMCIPHER CFB

Feb 19 10:52:02 raspi5 charon-systemd[21165]: TPM 2.0 - ECC curves: NIST_P256 BN_P256

Feb 19 10:52:02 raspi5 charon-systemd[21165]: TPM 2.0 via TSS2 v2 available

Feb 19 10:52:02 raspi5 charon-systemd[21165]: AIK signature algorithm is ECDSA with SHA256 hash

Feb 19 10:52:02 raspi5 charon-systemd[21165]: loaded ECDSA private key from token

</pre>

The ECC AIK certificate is loaded by the *charon-systemd* daemon via the TPM 2.0 resource manager

<pre>

Feb 19 10:52:02 raspi5 charon-systemd[21165]: TPM 2.0 - manufacturer: IFX (SLB9670) rev: 01.16 2015

Feb 19 10:52:02 raspi5 charon-systemd[21165]: TPM 2.0 - algorithms: RSA SHA1 HMAC AES KEYEDHASH XOR SHA256 RSASSA RSAES RSAPSS OAEP ECDSA ECDH SM2 KDF1_SP800_56A KDF1_SP800_108 ECC SYMCIPHER CFB

Feb 19 10:52:02 raspi5 charon-systemd[21165]: TPM 2.0 - ECC curves: NIST_P256 BN_P256

Feb 19 10:52:02 raspi5 charon-systemd[21165]: TPM 2.0 via TSS2 v2 available

Feb 19 10:52:02 raspi5 charon-systemd[21165]: loaded certificate from TPM NV index 0x01800004

</pre>

The two connection definitions are received by the *charon-systemd* daemon from the *swanctl* command line tool via the VICI interface

<pre>

Feb 19 10:52:02 raspi5 charon-systemd[21165]:   id not specified, defaulting to cert subject 'C=US, O=TNC Demo, OU=AIK RSA, CN=raspi5.example.com'

Feb 19 10:52:02 raspi5 charon-systemd[21165]: added vici connection: rsa

Feb 19 10:52:02 raspi5 charon-systemd[21165]:   id not specified, defaulting to cert subject 'C=US, O=TNC Demo, OU=AIK ECC, CN=raspi5.example.com'

Feb 19 10:52:02 raspi5 charon-systemd[21165]: added vici connection: ecc

</pre>

The *swanctl* command line tool reports its actions

<pre>

Feb 19 10:52:02 raspi5 swanctl[21183]: loaded certificate from '/etc/swanctl/x509/raspi5_ak_rsa_Cert.der'

Feb 19 10:52:02 raspi5 swanctl[21183]: loaded certificate from '/etc/swanctl/x509ca/demoCaCert.pem'

Feb 19 10:52:02 raspi5 swanctl[21183]: loaded key token_ak_rsa from token [keyid: f49e857dde4e67f5fb870398673f207cf33f2b66]

Feb 19 10:52:02 raspi5 swanctl[21183]: loaded key token_ak_ecc from token [keyid: c70e63f87f6ff65500e5057f5a3e6b6ce7d2d513]

Feb 19 10:52:02 raspi5 swanctl[21183]: loaded connection 'rsa'

Feb 19 10:52:02 raspi5 swanctl[21183]: loaded connection 'ecc'

Feb 19 10:52:02 raspi5 swanctl[21183]: successfully loaded 2 connections, 0 unloaded

</pre>

<pre>

Feb 19 10:52:02 raspi5 systemd[1]: Started strongSwan IPsec IKEv1/IKEv2 daemon using swanctl.

</pre>

The following *swanctl* command shows the two loaded connections

<pre>

swanctl --list-conns

</pre>

<pre>

rsa: IKEv2, reauthentication every 10800s, no rekeying

  local:  10.10.0.105

  remote: 10.10.0.104

  local public key authentication:

    id: C=US, O=TNC Demo, OU=AIK RSA, CN=raspi5.example.com

    certs: C=US, O=TNC Demo, OU=AIK RSA, CN=raspi5.example.com

  remote public key authentication:

    id: raspi4.example.com

  rsa: TRANSPORT, rekeying every 3600s or 300000000 bytes or 500000 packets

    local:  dynamic

    remote: dynamic

</pre>

<pre>

ecc: IKEv2, reauthentication every 10800s, no rekeying

  local:  10.10.0.105

  remote: 10.10.0.104

  local public key authentication:

    id: C=US, O=TNC Demo, OU=AIK ECC, CN=raspi5.example.com

    certs: C=US, O=TNC Demo, OU=AIK ECC, CN=raspi5.example.com

  remote public key authentication:

    id: raspi4.example.com

  ecc: TRANSPORT, rekeying every 3600s or 300000000 bytes or 500000 packets

    local:  dynamic

    remote: dynamic

</pre>

The loaded certificates can also be displayed

<pre>

swanctl --list-certs

</pre>

You can clearly see that the connection between the AK certificates and their matching AK private key has been established (..., has private key)

<pre>

List of X.509 End Entity Certificates

  subject:  "C=US, O=TNC Demo, OU=AIK RSA, CN=raspi5.example.com"

  issuer:   "C=US, O=TNC Demo, CN=TNC Demo CA"

  validity:  not before Feb 19 09:33:43 2017, ok

             not after  Aug 29 10:33:43 2026, ok (expires in 3477 days)

  serial:    11:57:33:3e:2a:8e:8a:32

  altNames:  raspi5.example.com

  authkeyId: 21:02:7e:2d:de:8b:77:48:75:de:56:2f:b5:d4:62:ec:c3:09:15:f2

  subjkeyId: f4:9e:85:7d:de:4e:67:f5:fb:87:03:98:67:3f:20:7c:f3:3f:2b:66

  pubkey:    RSA 2048 bits, has private key

  keyid:     71:21:f5:d4:7e:59:4a:88:16:ca:57:85:98:3d:36:a7:b1:d5:75:fa

  subjkey:   f4:9e:85:7d:de:4e:67:f5:fb:87:03:98:67:3f:20:7c:f3:3f:2b:66

  subject:  "C=US, O=TNC Demo, OU=AIK ECC, CN=raspi5.example.com"

  issuer:   "C=US, O=TNC Demo, CN=TNC Demo CA"

  validity:  not before Feb 17 23:17:19 2017, ok

             not after  Aug 30 00:17:19 2026, ok (expires in 3478 days)

  serial:    52:9d:3e:42:6f:71:63:3d

  altNames:  raspi5.example.com

  authkeyId: 21:02:7e:2d:de:8b:77:48:75:de:56:2f:b5:d4:62:ec:c3:09:15:f2

  subjkeyId: c7:0e:63:f8:7f:6f:f6:55:00:e5:05:7f:5a:3e:6b:6c:e7:d2:d5:13

  pubkey:    ECDSA 256 bits, has private key

  keyid:     71:49:7c:42:41:e7:c6:81:bc:31:73:f0:0f:7e:4a:e1:2d:53:00:38

  subjkey:   c7:0e:63:f8:7f:6f:f6:55:00:e5:05:7f:5a:3e:6b:6c:e7:d2:d5:13

</pre>

<pre>

List of X.509 CA Certificates

  subject:  "C=US, O=TNC Demo, CN=TNC Demo CA"

  issuer:   "C=US, O=TNC Demo, CN=TNC Demo CA"

  validity:  not before Aug 31 10:29:27 2016, ok

             not after  Aug 31 10:29:27 2026, ok (expires in 3479 days)

  serial:    02:c8:85:e1:ef:fa:8f:20

  flags:     CA CRLSign self-signed 

  subjkeyId: 21:02:7e:2d:de:8b:77:48:75:de:56:2f:b5:d4:62:ec:c3:09:15:f2

  pubkey:    ECDSA 256 bits

  keyid:     a1:b5:e0:29:d0:4c:a7:62:bd:ca:a3:b4:af:18:42:2c:4a:01:55:9a

  subjkey:   21:02:7e:2d:de:8b:77:48:75:de:56:2f:b5:d4:62:ec:c3:09:15:f2

</pre>

h2. IKEv2 Authentication with RSA AIK Certificate

With the following *swanctl* command the "rsa" connection is established

<pre>

swanctl --initiate --child rsa

</pre>

<pre>

Feb 19 10:52:21 raspi5 charon-systemd[21165]: vici initiate 'rsa'

Feb 19 10:52:21 raspi5 charon-systemd[21165]: initiating IKE_SA rsa[1] to 10.10.0.104

Feb 19 10:52:21 raspi5 charon-systemd[21165]: generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) V ]

Feb 19 10:52:21 raspi5 charon-systemd[21165]: sending packet: from 10.10.0.105[500] to 10.10.0.104[500] (1257 bytes)

Feb 19 10:52:21 raspi5 charon-systemd[21165]: received packet: from 10.10.0.104[500] to 10.10.0.105[500] (1259 bytes)

Feb 19 10:52:21 raspi5 charon-systemd[21165]: parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(HASH_ALG) V ]

Feb 19 10:52:21 raspi5 charon-systemd[21165]: received strongSwan vendor ID

Feb 19 10:52:21 raspi5 charon-systemd[21165]: received cert request for "C=US, O=TNC Demo, CN=TNC Demo CA"

Feb 19 10:52:21 raspi5 charon-systemd[21165]: sending cert request for "C=US, O=TNC Demo, CN=TNC Demo CA"

</pre>

The RSA AK private key stored in the TPM 2.0 is used to generate an *RSA_EMSA_PKCS1_SHA2_256* signature which is sent in the AUTH payload of the IKE_AUTH request. The matching client certificate is sent int the CERT payload.

<pre>

Feb 19 10:52:24 raspi5 charon-systemd[21165]: authentication of 'C=US, O=TNC Demo, OU=AIK RSA, CN=raspi5.example.com' (myself) with RSA_EMSA_PKCS1_SHA2_256 successful

Feb 19 10:52:24 raspi5 charon-systemd[21165]: sending end entity cert "C=US, O=TNC Demo, OU=AIK RSA, CN=raspi5.example.com"

</pre>

<pre>

Feb 19 10:52:24 raspi5 charon-systemd[21165]: establishing CHILD_SA rsa

Feb 19 10:52:24 raspi5 charon-systemd[21165]: generating IKE_AUTH request 1 [ IDi CERT CERTREQ IDr AUTH N(USE_TRANSP) SA TSi TSr N(MOBIKE_SUP) N(ADD_6_ADDR) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ]

Feb 19 10:52:24 raspi5 charon-systemd[21165]: sending packet: from 10.10.0.105[4500] to 10.10.0.104[4500] (1296 bytes)

Feb 19 10:52:24 raspi5 charon-systemd[21165]: received packet: from 10.10.0.104[4500] to 10.10.0.105[4500] (752 bytes)

Feb 19 10:52:24 raspi5 charon-systemd[21165]: parsed IKE_AUTH response 1 [ IDr CERT AUTH N(USE_TRANSP) SA TSi TSr N(AUTH_LFT) N(MOBIKE_SUP) N(NO_ADD_ADDR) ]

Feb 19 10:52:24 raspi5 charon-systemd[21165]: received end entity cert "C=US, O=TNC Demo, CN=raspi4.example.com"

Feb 19 10:52:24 raspi5 charon-systemd[21165]:   using certificate "C=US, O=TNC Demo, CN=raspi4.example.com"

Feb 19 10:52:24 raspi5 charon-systemd[21165]:   using trusted ca certificate "C=US, O=TNC Demo, CN=TNC Demo CA"

Feb 19 10:52:24 raspi5 charon-systemd[21165]:   reached self-signed root ca with a path length of 0

Feb 19 10:52:24 raspi5 charon-systemd[21165]: authentication of 'raspi4.example.com' with ECDSA_WITH_SHA256_DER successful

Feb 19 10:52:24 raspi5 charon-systemd[21165]: IKE_SA rsa[1] established between 10.10.0.105[C=US, O=TNC Demo, OU=AIK RSA, CN=raspi5.example.com]...10.10.0.104[raspi4.example.com]

Feb 19 10:52:24 raspi5 charon-systemd[21165]: scheduling reauthentication in 10507s

Feb 19 10:52:24 raspi5 charon-systemd[21165]: maximum IKE_SA lifetime 11587s

Feb 19 10:52:24 raspi5 charon-systemd[21165]: CHILD_SA rsa{1} established with SPIs c23deb9d_i ce48d08e_o and TS 10.10.0.105/32 === 10.10.0.104/32

Feb 19 10:52:24 raspi5 charon-systemd[21165]: received AUTH_LIFETIME of 10103s, scheduling reauthentication in 9023s

Feb 19 10:52:24 raspi5 charon-systemd[21165]: peer supports MOBIKE

</pre>

The following *swanctl* command shows the established IPsec connection

<pre>

 swanctl --list-sas

</pre>

<pre>

rsa: #1, ESTABLISHED, IKEv2, 7ba3b4d06c051ecb_i* 14e1769a8aeb7f28_r

  local  'C=US, O=TNC Demo, OU=AIK RSA, CN=raspi5.example.com' @ 10.10.0.105[4500]

  remote 'raspi4.example.com' @ 10.10.0.104[4500]

  AES_CBC-128/HMAC_SHA2_256_128/PRF_HMAC_SHA2_256/CURVE_25519

  established 252s ago, reauth in 8771s

  rsa: #1, reqid 1, INSTALLED, TRANSPORT, ESP:AES_CBC-128/HMAC_SHA2_256_128

    installed 252s ago, rekeying in 3258s, expires in 3708s

    in  c23deb9d,    640 bytes,    10 packets,     3s ago

    out ce48d08e,    640 bytes,    10 packets,     3s ago

    local  10.10.0.105/32

    remote 10.10.0.104/32

</pre>

With this *swanctl* command the "rsa" connection is terminated

<pre>

swanctl --terminate --ike rsa

</pre>

<pre>

Feb 19 10:59:16 raspi5 charon-systemd[21165]: vici terminate IKE_SA 'rsa'

Feb 19 10:59:16 raspi5 charon-systemd[21165]: deleting IKE_SA rsa[1] between 10.10.0.105[C=US, O=TNC Demo, OU=AIK RSA, CN=raspi5.example.com]...10.10.0.104[raspi4.example.com]

Feb 19 10:59:16 raspi5 charon-systemd[21165]: sending DELETE for IKE_SA rsa[1]

Feb 19 10:59:16 raspi5 charon-systemd[21165]: generating INFORMATIONAL request 2 [ D ]

Feb 19 10:59:16 raspi5 charon-systemd[21165]: sending packet: from 10.10.0.105[4500] to 10.10.0.104[4500] (80 bytes)

Feb 19 10:59:16 raspi5 charon-systemd[21165]: received packet: from 10.10.0.104[4500] to 10.10.0.105[4500] (80 bytes)

Feb 19 10:59:16 raspi5 charon-systemd[21165]: parsed INFORMATIONAL response 2 [ ]

Feb 19 10:59:16 raspi5 charon-systemd[21165]: IKE_SA deleted

</pre>

h2. IKEv2 Authentication with ECC AIK Certificate

Next we initiate the "ecc" connection

<pre>

swanctl --initiate --child ecc

</pre>

<pre>

Feb 19 11:00:32 raspi5 charon-systemd[21165]: vici initiate 'ecc'

Feb 19 11:00:32 raspi5 charon-systemd[21165]: initiating IKE_SA ecc[2] to 10.10.0.104

Feb 19 11:00:32 raspi5 charon-systemd[21165]: generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) V ]

Feb 19 11:00:32 raspi5 charon-systemd[21165]: sending packet: from 10.10.0.105[500] to 10.10.0.104[500] (1257 bytes)

Feb 19 11:00:32 raspi5 charon-systemd[21165]: received packet: from 10.10.0.104[500] to 10.10.0.105[500] (1259 bytes)

Feb 19 11:00:32 raspi5 charon-systemd[21165]: parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) CERTREQ N(HASH_ALG) V ]

Feb 19 11:00:32 raspi5 charon-systemd[21165]: received strongSwan vendor ID

Feb 19 11:00:32 raspi5 charon-systemd[21165]: received cert request for "C=US, O=TNC Demo, CN=TNC Demo CA"

Feb 19 11:00:32 raspi5 charon-systemd[21165]: sending cert request for "C=US, O=TNC Demo, CN=TNC Demo CA"

</pre>

The ECC AK private key stored in the TPM 2.0 is used to generate an *ECDSA_WITH_SHA256_DER* signature which is sent in the AUTH payload of the IKE_AUTH request. The matching client certificate is sent int the CERT payload.

<pre>

Feb 19 11:00:34 raspi5 charon-systemd[21165]: authentication of 'C=US, O=TNC Demo, OU=AIK ECC, CN=raspi5.example.com' (myself) with ECDSA_WITH_SHA256_DER successful

Feb 19 11:00:34 raspi5 charon-systemd[21165]: sending end entity cert "C=US, O=TNC Demo, OU=AIK ECC, CN=raspi5.example.com"

</pre>

<pre>

Feb 19 11:00:34 raspi5 charon-systemd[21165]: establishing CHILD_SA ecc

Feb 19 11:00:34 raspi5 charon-systemd[21165]: generating IKE_AUTH request 1 [ IDi CERT CERTREQ IDr AUTH N(USE_TRANSP) SA TSi TSr N(MOBIKE_SUP) N(ADD_6_ADDR) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ]

Feb 19 11:00:34 raspi5 charon-systemd[21165]: sending packet: from 10.10.0.105[4500] to 10.10.0.104[4500] (912 bytes)

Feb 19 11:00:34 raspi5 charon-systemd[21165]: received packet: from 10.10.0.104[4500] to 10.10.0.105[4500] (752 bytes)

Feb 19 11:00:34 raspi5 charon-systemd[21165]: parsed IKE_AUTH response 1 [ IDr CERT AUTH N(USE_TRANSP) SA TSi TSr N(AUTH_LFT) N(MOBIKE_SUP) N(NO_ADD_ADDR) ]

Feb 19 11:00:34 raspi5 charon-systemd[21165]: received end entity cert "C=US, O=TNC Demo, CN=raspi4.example.com"

Feb 19 11:00:34 raspi5 charon-systemd[21165]:   using certificate "C=US, O=TNC Demo, CN=raspi4.example.com"

Feb 19 11:00:34 raspi5 charon-systemd[21165]:   using trusted ca certificate "C=US, O=TNC Demo, CN=TNC Demo CA"

Feb 19 11:00:34 raspi5 charon-systemd[21165]:   reached self-signed root ca with a path length of 0

Feb 19 11:00:34 raspi5 charon-systemd[21165]: authentication of 'raspi4.example.com' with ECDSA_WITH_SHA256_DER successful

Feb 19 11:00:34 raspi5 charon-systemd[21165]: IKE_SA ecc[2] established between 10.10.0.105[C=US, O=TNC Demo, OU=AIK ECC, CN=raspi5.example.com]...10.10.0.104[raspi4.example.com]

Feb 19 11:00:34 raspi5 charon-systemd[21165]: scheduling reauthentication in 10180s

Feb 19 11:00:34 raspi5 charon-systemd[21165]: maximum IKE_SA lifetime 11260s

Feb 19 11:00:34 raspi5 charon-systemd[21165]: CHILD_SA ecc{2} established with SPIs c2c16cd0_i c47ea6f6_o and TS 10.10.0.105/32 === 10.10.0.104/32

Feb 19 11:00:34 raspi5 charon-systemd[21165]: received AUTH_LIFETIME of 9880s, scheduling reauthentication in 8800s

Feb 19 11:00:34 raspi5 charon-systemd[21165]: peer supports MOBIKE

</pre>

The establed IKE and CHILD SAs are displayed

<pre>

 swanctl --list-sas

</pre>

<pre>

ecc: #2, ESTABLISHED, IKEv2, b7f2652777b0996a_i* 12282b5964ff0658_r

  local  'C=US, O=TNC Demo, OU=AIK ECC, CN=raspi5.example.com' @ 10.10.0.105[4500]

  remote 'raspi4.example.com' @ 10.10.0.104[4500]

  AES_CBC-128/HMAC_SHA2_256_128/PRF_HMAC_SHA2_256/CURVE_25519

  established 126s ago, reauth in 8674s

  ecc: #2, reqid 2, INSTALLED, TRANSPORT, ESP:AES_CBC-128/HMAC_SHA2_256_128

    installed 126s ago, rekeying in 3252s, expires in 3834s

    in  c2c16cd0,    320 bytes,     5 packets,     2s ago

    out c47ea6f6,    320 bytes,     5 packets,     2s ago

    local  10.10.0.105/32

    remote 10.10.0.104/32

</pre>

The IKE and CHILD SAs are terminated

<pre>

swanctl --terminate --ike ecc

</pre>

<pre>

Feb 19 11:04:32 raspi5 charon-systemd[21165]: vici terminate IKE_SA 'ecc'

Feb 19 11:04:32 raspi5 charon-systemd[21165]: deleting IKE_SA ecc[2] between 10.10.0.105[C=US, O=TNC Demo, OU=AIK ECC, CN=raspi5.example.com]...10.10.0.104[raspi4.example.com]

Feb 19 11:04:32 raspi5 charon-systemd[21165]: sending DELETE for IKE_SA ecc[2]

Feb 19 11:04:32 raspi5 charon-systemd[21165]: generating INFORMATIONAL request 2 [ D ]

Feb 19 11:04:32 raspi5 charon-systemd[21165]: sending packet: from 10.10.0.105[4500] to 10.10.0.104[4500] (80 bytes)

Feb 19 11:04:32 raspi5 charon-systemd[21165]: received packet: from 10.10.0.104[4500] to 10.10.0.105[4500] (80 bytes)

Feb 19 11:04:32 raspi5 charon-systemd[21165]: parsed INFORMATIONAL response 2 [ ]

Feb 19 11:04:32 raspi5 charon-systemd[21165]: IKE_SA deleted

</pre>