strongSwan

h1. NTRU

NTRU is a lattice-based post-quantum encryption algorithm owned by "Security Innovation":https://www.securityinnovation.com/products/encryption-libraries/ntru-cryptography.html. Our implementation of the ntru plugin has been derived from the "ntru-crypto":https://github.com/NTRUOpenSourceProject/ntru-crypto C source code made available by Security Innovations under the GNU GPLv2 open source license. NTRU has been standardized by *IEEE Std 1363.1-2008* and *ANSI X9.98-2010*.

h2. NTRU Encryption used in IKE Key Exchange

The strongSwan *ntru* plugin uses NTRU encryption as an IKE key exchange algorithm in the following way:

 * The IKE initiator generates a random NTRU public/private key pair for the specified security strength.

 * The IKE initiator sends the NTRU public key in the KEi payload to the IKE responder.

 * The IKE responder generates a random secret _s_ with a size of twice the security strength and encrypts it with the NTRU public key.

 * The IKE responder sends the encrypted secret in the KEr payload to the IKE initiator

 * The IKE initiator decrypts the KEr payload using the NTRU private key and extracts the secret _s_.

 * With IKEv2 both initiator and responder use the secret _s_ to compute

<pre>

SKEYSEED = prf(Ni | Nr, s)

</pre>

 * With IKEv1 both initiator and responder use the secret _s_ to compute

<pre>

SKEYID = prf(Ni_b | Nr_b, s)               # for authby=pubkey i.e. public key signatures

SKEYID = prf(pre-shared-key, Ni_b | Nr_b)  # for authby=psk, i.e. pre-shared keys

SKEYID_d = prf(SKEYID, s | CKY-I | CKY-R | 0)

SKEYID_a = prf(SKEYID, SKEYID_d | s | CKY-I | CKY-R | 1)

SKEYID_e = prf(SKEYID, SKEYID_a | s | CKY-I | CKY-R | 2)

</pre> 

h2. Configuration Options

NTRU parameter sets are defined for security strengths of 112, 128, 192 and 256 bits. strongSwan defines the following key exchange algorithm keywords for NTRU:

|Keyword    |DH Group |Strength   |

|*ntru112*  |=. 1030  |>.112 bits |

|*ntru128*  |=. 1031  |>.128 bits |

|*ntru192*  |=. 1032  |>.192 bits |

|*ntru256*  |=. 1033  |>.256 bits |

Thus an example IKE algorithm definition in _/etc/ipsec.conf_ for a security strength of 128 bits is

<pre>

ike=aes128-sha256-ntru128

</pre>

or for a security strength of 192 bits

<pre>

ike=aes192-sha384-ntru192

</pre>

and for a security strength of 256 bits

<pre>

ike=aes256-sha512-ntru256

</pre>

Since the Diffie-Hellman Group Transform IDs 1030..1033 selected by the strongSwan project to designate the four NTRU key exchange strengths are taken from the private-use range, the strongSwan vendor ID *must* be sent by the charon daemon. This can be enabled by the following statement in /etc/strongswan.conf:

<pre>

charon {

  send_vendor_id = yes

}

</pre>