strongSwan

h1. IKEv1 Legacy Configuration Examples

These example scenarios use the deprecated stroke management interface.

h2. Remote Access

|RSA authentication with X.509 certificates    |{{tc(ikev1/rw-cert,IPv4)}}     |{{tc(ipv6-stroke/rw-ikev1,IPv6)}} |{{tc(ikev1/nat-rw,NAT)}} |

|PSK authentication with pre-shared keys (IP)  |{{tc(ikev1/rw-psk-ipv4,IPv4)}} |{{tc(ipv6-stroke/rw-psk-ikev1,IPv6)}} | |

|PSK authentication with pre-shared keys (FQDN)|{{tc(ikev1/rw-psk-fqdn,IPv4)}} | | |

|RSA with XAUTH authentication                 |{{tc(ikev1/xauth-rsa,IPv4)}}   | | |

|PSK with XAUTH authentication                 |{{tc(ikev1/xauth-psk,IPv4)}}   | | |

|Hybrid RSA (server) / XAUTH (client) authentication |{{tc(ikev1/xauth-id-rsa-hybrid,IPv4)}}    | | |

h2. Remote Access with Virtual IP Adresses

|DB-based server-side virtual IP pool                   |{{tc(ikev1/ip-pool-db,IPv4)}}            |

|Static server-side virtual IP addresses                |{{tc(ikev1/config-payload,IPv4)}}        |

|Static server-side virtual IP addresses in push mode   |{{tc(ikev1/config-payload-push,IPv4)}}   |

|Static client-side virtual IP addresses                |{{tc(ikev1/virtual-ip,IPv4)}}            |

|RSA with XAUTH authentication and virtual IP addresses |{{tc(ikev1/xauth-id-rsa-config,IPv4)}} |

|PSK with XAUTH authentication and virtual IP addresses |{{tc(ikev1/xauth-id-psk-config,IPv4)}} |

h2. Site-to-Site

|RSA authentication with X.509 certificates |{{tc(ikev1/net2net-cert,IPv4)}} |{{tc(ipv6-stroke/net2net-ikev1,IPv6)}} |

|PSK authentication with pre-shared keys    |{{tc(ikev1/net2net-psk,IPv4)}}  | |

h2. Host-to-Host

|IPsec tunnel mode with X.509 certificates    |{{tc(ikev1/host2host-cert,IPv4)}}      |{{tc(ipv6-stroke/host2host-ikev1,IPv6)}} |

|IPsec transport mode with X.509 certificates |{{tc(ikev1/host2host-transport,IPv4)}} |{{tc(ipv6-stroke/transport-ikev1,IPv6)}} |

h2. Complete List

{{tc(ikev1,All IKEv1 legacy test scenarios)}}