Project

General

Profile

ipsec.conf: conn Reference » History » Version 85

James Birkett, 18.01.2017 23:10
according to release notes https://www.strongswan.org/blog/2013/08/01/strongswan-5.1.0-released.html

1 50 Tobias Brunner
{{title(ipsec.conf: conn Reference)}}
2 49 Tobias Brunner
3 49 Tobias Brunner
h1. ipsec.conf: conn <name>
4 1 Martin Willi
5 44 Tobias Brunner
{{>toc}}
6 1 Martin Willi
7 44 Tobias Brunner
h2. General Connection Parameters
8 21 Andreas Steffen
9 36 Andreas Steffen
_aaa_identity = <id>_
10 36 Andreas Steffen
11 36 Andreas Steffen
p((. defines the identity of the AAA backend used during IKEv2 EAP authentication. This is required if
12 36 Andreas Steffen
     the EAP client uses a method that verifies the server identity (such as EAP-TLS), but it does not
13 36 Andreas Steffen
     match the IKEv2 gateway identity.
14 36 Andreas Steffen
15 68 Tobias Brunner
_ah = <cipher suites>_
16 68 Tobias Brunner
17 68 Tobias Brunner
p((. comma-separated list of AH algorithms to be used for the connection, e.g. _sha1-sha256-modp1024_.
18 68 Tobias Brunner
     The notation is integrity[-dhgroup]. For IKEv2, multiple algorithms (separated by -) of the same type
19 68 Tobias Brunner
     can be included in a single proposal. IKEv1 only includes the first algorithm in a proposal.
20 68 Tobias Brunner
     Only either the *ah* or the *esp* keyword may be used, AH+ESP bundles are not supported.
21 68 Tobias Brunner
22 76 Tobias Brunner
p((. There is no default AH cipher suite since by default ESP is used. The daemon adds its extensive default
23 76 Tobias Brunner
     proposal to the configured value. To restrict it to the configured proposal an exclamation mark (!) can
24 76 Tobias Brunner
     be added at the end.
25 83 Tobias Brunner
     *Note:* As a responder, the daemon defaults to selecting the first configured proposal that's also
26 83 Tobias Brunner
     supported by the peer. By disabling _charon.prefer_configured_proposals_ in [[strongswan.conf]] this may
27 83 Tobias Brunner
     be changed to selecting the first acceptable proposal sent by the peer instead.
28 83 Tobias Brunner
     In order to restrict a responder to only accept specific cipher suites, the strict flag (!, exclamation mark)
29 1 Martin Willi
     can be used, e.g: sha256-sha512-modp2048!
30 68 Tobias Brunner
31 83 Tobias Brunner
p((. If dh-group is specified, CHILD_SA/Quick Mode setup and rekeying include a separate Diffe-Hellman
32 83 Tobias Brunner
     exchange (refer to _esp_ for details).
33 68 Tobias Brunner
34 68 Tobias Brunner
p((. Refer to [[IKEv1CipherSuites]] and [[IKEv2CipherSuites]] for a list of valid keywords.
35 68 Tobias Brunner
36 68 Tobias Brunner
p((. Available since [[5.1.1]].
37 68 Tobias Brunner
38 58 Tobias Brunner
_aggressive = yes | *no*_
39 58 Tobias Brunner
40 58 Tobias Brunner
p((. whether to use IKEv1 Aggressive or Main Mode (the default). Available since [[5.0.0]].
41 58 Tobias Brunner
42 80 Tobias Brunner
_also = <name>_
43 1 Martin Willi
44 80 Tobias Brunner
p((. includes conn section <name>. Some aspects of this changed with version:5.2.0 (refer to [[IpsecConf#Reusing-Existing-Parameters]] for details).
45 80 Tobias Brunner
46 1 Martin Willi
47 58 Tobias Brunner
_authby = *pubkey* | rsasig | ecdsasig | psk | secret | xauthrsasig | xauthpsk | never_
48 24 Andreas Steffen
49 31 Martin Willi
p((. how the two security gateways should authenticate each other; acceptable values are *secret* or *psk*
50 58 Tobias Brunner
     for pre-shared secrets, *pubkey* (the default) for public key signatures as well as the synonyms *rsasig*
51 58 Tobias Brunner
     for RSA digital signatures and *ecdsasig* for Elliptic Curve DSA signatures.
52 58 Tobias Brunner
     *never*  can be used if negotiation is never to be attempted or accepted (useful for shunt-only conns).
53 58 Tobias Brunner
     Digital signatures are superior in every way to shared secrets. IKEv1 additionally supports the values
54 58 Tobias Brunner
     *xauthpsk* and *xauthrsasig* that will enable _eXtended Authentication (XAuth)_ in addition to IKEv1 main
55 58 Tobias Brunner
     mode based on shared secrets or digital RSA signatures,  respectively.
56 58 Tobias Brunner
     This parameter is deprecated for IKEv2 connections (and IKEv1 connections since [[5.0.0]]), as two peers
57 58 Tobias Brunner
     do not need to agree on an authentication method. Use the _left|rightauth_ parameter instead to define
58 58 Tobias Brunner
     authentication methods.
59 1 Martin Willi
60 31 Martin Willi
_auto = *ignore* | add | route | start_
61 23 Tobias Brunner
62 1 Martin Willi
p((. what operation, if any, should be done automatically at IPsec startup. *add* loads a connection without
63 21 Andreas Steffen
     starting it. *route* loads a connection and installs kernel traps. If traffic is detected between
64 21 Andreas Steffen
     _leftsubnet_ and _rightsubnet_, a connection is established. *start* loads a connection and brings
65 58 Tobias Brunner
     it up immediately. *ignore* ignores the connection. This is equal to deleting a connection from the config
66 57 Tobias Brunner
     file. Relevant only locally, other end need not agree on it.
67 1 Martin Willi
68 23 Tobias Brunner
_closeaction = *none* | clear | hold | restart_
69 47 Tobias Brunner
70 85 James Birkett
p((. defines the action to take if the remote peer unexpectedly closes a CHILD_SA (see _dpdaction_ for
71 1 Martin Willi
     meaning of values). A _closeaction_ should not be used if the peer uses reauthentication or uniqueids checking,
72 85 James Birkett
     as these events might trigger the defined action when not desired. Prior to version:5.1.0, _closeaction_ was 
73 85 James Birkett
     not supported for IKEv1 connections.
74 47 Tobias Brunner
75 23 Tobias Brunner
_compress = yes | *no*_
76 31 Martin Willi
77 23 Tobias Brunner
p((. whether IPComp compression of content is proposed on the connection (link-level compression does not work on
78 57 Tobias Brunner
     encrypted data, so to be effective, compression must be done before encryption). A value of *yes* causes the daemon
79 57 Tobias Brunner
     to propose both compressed and  uncompressed, and  prefer compressed. A value of *no* prevents the daemon from proposing or accepting compression.
80 1 Martin Willi
81 21 Andreas Steffen
_dpdaction = *none* | clear | hold | restart_
82 21 Andreas Steffen
83 21 Andreas Steffen
p((. controls the use of the Dead Peer Detection protocol (DPD, RFC 3706) where R_U_THERE notification messages
84 1 Martin Willi
     (IKEv1) or empty INFORMATIONAL messages (IKEv2) are periodically sent in order to check the liveliness of the
85 81 Tobias Brunner
     IPsec peer. The values *clear*, *hold*, and *restart* all activate DPD and determine the action to perform on a timeout.
86 81 Tobias Brunner
     With *clear* the connection is closed with no further actions taken. *hold* installs a trap policy, which will catch
87 81 Tobias Brunner
     matching traffic and tries to re-negotiate the connection on demand. *restart* will immediately trigger an attempt
88 81 Tobias Brunner
     to re-negotiate the connection. The default is *none* which disables the active sending of DPD messages.
89 21 Andreas Steffen
90 21 Andreas Steffen
_dpddelay = *30s* | <time>_
91 41 Tobias Brunner
92 1 Martin Willi
p((. defines  the  period time interval with which R_U_THERE messages/INFORMATIONAL exchanges are sent to the peer.
93 31 Martin Willi
     These are only sent if no other traffic is received. In IKEv2, a value of 0 sends no additional INFORMATIONAL
94 1 Martin Willi
     messages and uses only standard messages (such as those to rekey) to detect dead peers.
95 30 Martin Willi
96 31 Martin Willi
_dpdtimeout = *150s* | <time>_
97 30 Martin Willi
98 54 Andreas Steffen
p((. defines the timeout interval, after which all connections to a peer are deleted in case of inactivity.
99 23 Tobias Brunner
     This only applies to IKEv1, in IKEv2 the default [[Retransmission|retransmission timeout]] applies, as every exchange is used to
100 41 Tobias Brunner
     detect dead peers.
101 1 Martin Willi
102 1 Martin Willi
_inactivity = <time>_
103 65 Andreas Steffen
104 1 Martin Willi
p((. defines the timeout interval, after which a CHILD_SA is closed if it did not send or receive any traffic.
105 41 Tobias Brunner
     Not supported for IKEv1 connections prior to [[5.0.0]].
106 1 Martin Willi
107 23 Tobias Brunner
_eap_identity = <id>_
108 1 Martin Willi
109 31 Martin Willi
p((. defines the identity the client uses to reply to an EAP Identity request. If defined on the EAP server, the defined
110 23 Tobias Brunner
     identity  will be used as peer identity during EAP authentication. The special value _%identity_ uses the EAP Identity method
111 14 Martin Willi
     to ask the client for a EAP identity. If not defined, the IKEv2 identity will be used as EAP identity.
112 1 Martin Willi
113 1 Martin Willi
_esp = <cipher suites>_
114 57 Tobias Brunner
115 48 Tobias Brunner
p((. comma-separated list of ESP encryption/authentication algorithms to be used for the connection, e.g.
116 1 Martin Willi
     _aes128-sha256_. The notation is _encryption-integrity[-dhgroup][-esnmode]_.
117 68 Tobias Brunner
     For IKEv2, multiple algorithms (separated by -) of the same type can be included in a single proposal.
118 68 Tobias Brunner
     IKEv1 only includes the first algorithm in a proposal.  Only either the *ah* or the *esp* keyword may
119 1 Martin Willi
     be used, AH+ESP bundles are not supported.
120 1 Martin Willi
121 1 Martin Willi
p((. Defaults to *aes128-sha256* (_aes128-sha1,3des-sha1_ before version:5.4.0). The daemon adds its extensive default
122 1 Martin Willi
     proposal to this default or the configured value. To restrict it to the configured proposal an exclamation mark (*&#33;*)
123 1 Martin Willi
     can be added at the end.
124 83 Tobias Brunner
     *Note:* As a responder, the daemon defaults to selecting the first configured proposal that's also
125 83 Tobias Brunner
     supported by the peer. By disabling _charon.prefer_configured_proposals_ in [[strongswan.conf]] this may
126 83 Tobias Brunner
     be changed to selecting the first acceptable proposal sent by the peer instead.
127 83 Tobias Brunner
     In order to restrict a responder to only accept specific cipher suites, the strict flag (*&#33;*, exclamation mark)
128 1 Martin Willi
     can be used, e.g: _aes256-sha512-modp4096!_
129 1 Martin Willi
130 83 Tobias Brunner
p((. If _dh-group_ is specified, CHILD_SA rekeying and initial negotiation include a separate Diffe-Hellman
131 83 Tobias Brunner
     exchange (since [[5.0.0]] this also applies to IKEv1 Quick Mode). However, for IKEv2, the keys of the CHILD_SA
132 83 Tobias Brunner
     created implicitly with the IKE_SA will always be derived from the IKE_SA's key material. So any DH group
133 83 Tobias Brunner
     specified here will only apply when the CHILD_SA is later rekeyed or is created with a separate CREATE_CHILD_SA
134 83 Tobias Brunner
     exchange.  Therefore, a proposal mismatch might not immediately be noticed when the SA is established,
135 83 Tobias Brunner
     but may later cause rekeying to fail.
136 68 Tobias Brunner
137 83 Tobias Brunner
p((. Valid values for _esnmode_ are _esn_ and _noesn_.  Specifying both negotiates extended sequence
138 48 Tobias Brunner
     number support with the peer, the default is *noesn*.
139 1 Martin Willi
140 68 Tobias Brunner
p((. Refer to [[IKEv1CipherSuites]] and [[IKEv2CipherSuites]] for a list of valid keywords.
141 68 Tobias Brunner
142 1 Martin Willi
_forceencaps = yes | *no*_
143 48 Tobias Brunner
144 48 Tobias Brunner
p((.  force UDP encapsulation for ESP packets even if no NAT situation is detected.
145 43 Tobias Brunner
      This may help to surmount restrictive firewalls. In order to force the peer to
146 57 Tobias Brunner
      encapsulate packets, NAT detection payloads are faked.
147 65 Andreas Steffen
      Not supported for IKEv1 connections prior to [[5.0.0]].
148 1 Martin Willi
149 84 Tobias Brunner
_fragmentation = *yes* | force | no_
150 60 Tobias Brunner
151 74 Tobias Brunner
p((.  whether to use IKE fragmentation (proprietary IKEv1 extension or IKEv2 fragmentation as per "RFC 7383":http://tools.ietf.org/html/rfc7383).
152 74 Tobias Brunner
      Fragmented messages sent by a peer are always accepted irrespective of the value of this option.
153 84 Tobias Brunner
      If set to *yes* (the default since version:5.5.1) and the peer supports it, larger IKE messages will be sent in fragments (the
154 84 Tobias Brunner
      maximum fragment size can be configured in [[strongswan.conf]]). If set to *force* (only supported for IKEv1) the initial
155 84 Tobias Brunner
      IKE message will already be fragmented if required.
156 74 Tobias Brunner
      Available for IKEv1 connections since version:5.0.2 and for IKEv2 connections since version:5.2.1.
157 60 Tobias Brunner
158 31 Martin Willi
_ike = <cipher suites>_
159 1 Martin Willi
160 1 Martin Willi
p((. comma-separated list of IKE/ISAKMP SA encryption/authentication algorithms to be used, e.g.
161 82 Tobias Brunner
     _aes128-sha256-modp3072_. The notation is _encryption-integrity[-prf]-dhgroup_. In IKEv2, multiple algorithms
162 82 Tobias Brunner
     and proposals may be included, such as _aes128-aes256-sha1-modp3072-modp2048,3des-sha1-md5-modp1024_.
163 59 Tobias Brunner
     
164 1 Martin Willi
p((. The ability to configure a PRF algorithm different to that defined for integrity protection was added with [[5.0.2]].
165 59 Tobias Brunner
     If no PRF is configured, the algorithms defined for integrity are proposed as PRF.  The prf keywords are the same as
166 59 Tobias Brunner
     the integrity algorithms, but have a _prf_ prefix (such as _prfsha1_, _prfsha256_ or _prfaesxcbc_).
167 59 Tobias Brunner
168 82 Tobias Brunner
p((. Defaults to *aes128-sha256-modp3072* (_aes128-sha1-modp2048,3des-sha1-modp1536_ before version:5.4.0) for IKEv1.
169 82 Tobias Brunner
     The daemon adds its extensive default proposal to this default or the configured value. To restrict it to the
170 82 Tobias Brunner
     configured proposal an exclamation mark (*&#33;*) can be added at the end.
171 59 Tobias Brunner
     Refer to [[IKEv1CipherSuites]] and [[IKEv2CipherSuites]] for a list of valid keywords.
172 59 Tobias Brunner
     
173 59 Tobias Brunner
p((. *Note*: As a responder both daemons accept the first supported proposal received from the peer. In order
174 51 Tobias Brunner
     to restrict a responder to only accept specific cipher suites, the strict flag (*&#33;*, exclamation mark)
175 48 Tobias Brunner
     can be used, e.g: _aes256-sha512-modp4096!_
176 51 Tobias Brunner
177 62 Tobias Brunner
_ikedscp = *000000* | <DSCP field>_
178 62 Tobias Brunner
179 62 Tobias Brunner
p((. Differentiated Services Field Codepoint to set on outgoing IKE packets sent
180 62 Tobias Brunner
     from this connection. The value is a six digit binary encoded string defining
181 62 Tobias Brunner
     the Codepoint to set, as defined in "RFC 2474":http://tools.ietf.org/html/rfc2474.
182 62 Tobias Brunner
183 48 Tobias Brunner
_ikelifetime = *3h* | <time>_
184 43 Tobias Brunner
185 58 Tobias Brunner
p((. how long the keying channel of a connection (_ISAKMP or IKE SA_) should last before being renegotiated.
186 58 Tobias Brunner
     Also see [[ExpiryRekey|Expiry and Rekey]].
187 31 Martin Willi
188 40 Tobias Brunner
_installpolicy = *yes* | no_
189 1 Martin Willi
190 58 Tobias Brunner
p((. decides whether IPsec policies are installed in the kernel by the charon daemon for a given connection.
191 31 Martin Willi
     Allows peaceful cooperation e.g. with the Mobile IPv6  _mip6d_ daemon who wants to control the kernel policies.
192 23 Tobias Brunner
193 21 Andreas Steffen
_keyexchange = *ike* | ikev1 | ikev2_
194 1 Martin Willi
195 23 Tobias Brunner
p((. method of key exchange; which protocol should be used to initialize the connection.
196 58 Tobias Brunner
     Prior to [[5.0.0]] connections marked with *ikev1*  were initiated with Pluto, those marked with *ikev2* with Charon.
197 58 Tobias Brunner
     An incoming request from the remote peer was handled by the correct daemon, unaffected from the _keyexchange_ setting.
198 57 Tobias Brunner
     Starting with strongSwan [[4.5.0]] the default value *ike* is a synonym for *ikev2*, whereas in older strongSwan releases *ikev1* was assumed.
199 57 Tobias Brunner
     Since [[5.0.0]] both protocols are handled by Charon and connections marked with *ike* will use IKEv2 when initiating, but accept any protocol version when responding.
200 38 Andreas Steffen
201 38 Andreas Steffen
_keyingtries = *3* | <number> | %forever_
202 20 Andreas Steffen
203 45 Tobias Brunner
p((. how  many attempts (a positive integer or _%forever_) should be made to negotiate a connection, or a replacement
204 31 Martin Willi
     for one, before giving up (default 3). The value _%forever_ means 'never give up'.  Relevant  only  locally, other end need
205 46 Daniel Mentz
     not agree on it.
206 45 Tobias Brunner
207 1 Martin Willi
_keylife_
208 26 Tobias Brunner
209 31 Martin Willi
p((. synonym for _lifetime_.
210 26 Tobias Brunner
211 26 Tobias Brunner
_lifebytes = <number>_
212 31 Martin Willi
213 65 Andreas Steffen
p((. the number of bytes transmitted over an IPsec SA before it expires. Not supported for IKEv1 connections prior to [[5.0.0]].
214 26 Tobias Brunner
215 26 Tobias Brunner
_lifepackets = <number>_
216 1 Martin Willi
217 65 Andreas Steffen
p((. the number of packets transmitted over an IPsec SA before it expires. Not supported for IKEv1 connections prior to [[5.0.0]].
218 1 Martin Willi
219 31 Martin Willi
_lifetime = *1h* | <time>_
220 26 Tobias Brunner
221 31 Martin Willi
p((. how  long  a  particular  instance  of a connection (a set of encryption/authentication keys for user packets)
222 1 Martin Willi
     should last, from successful negotiation to expiry; acceptable values are an integer optionally followed by
223 1 Martin Willi
     _s_ (a time in seconds) or a decimal number followed by _m_, _h_, or _d_ (a time in minutes, hours,
224 21 Andreas Steffen
     or days respectively) (default _1h_, maximum _24h_).  Normally, the connection is renegotiated (via the
225 1 Martin Willi
     keying  channel) before it expires (see _margintime_).  The two ends need not exactly agree on _lifetime_, although if they
226 1 Martin Willi
     do not, there will be some clutter of superseded connections on the end which thinks the lifetime is longer.
227 1 Martin Willi
     Also see [[ExpiryRekey|Expiry and Rekey]].
228 40 Tobias Brunner
229 1 Martin Willi
_marginbytes = <number>_
230 26 Tobias Brunner
231 57 Tobias Brunner
p((. how many bytes before IPsec SA expiry (see _lifebytes_) should attempts to negotiate a replacement begin.
232 26 Tobias Brunner
233 26 Tobias Brunner
_marginpackets = <number>_
234 26 Tobias Brunner
235 57 Tobias Brunner
p((. how many packets before IPsec SA expiry (see _lifepackets_) should attempts to negotiate a replacement begin.
236 26 Tobias Brunner
237 40 Tobias Brunner
_margintime = *9m* | <time>_
238 1 Martin Willi
239 1 Martin Willi
p((. how long before connection expiry or keying-channel expiry should attempts to negotiate a replacement begin; acceptable values
240 26 Tobias Brunner
     as for _lifetime_ (default _9m_).  Relevant only locally, other end need not agree on it. Also see [[ExpiryRekey|Expiry and Rekey]].
241 35 Andreas Steffen
242 35 Andreas Steffen
_mark = <value>[/<mask>]_
243 37 Tobias Brunner
244 35 Andreas Steffen
p((. sets  an XFRM mark in the inbound and outbound IPsec SAs and policies. If the mask is missing then
245 75 Tobias Brunner
     a default mask of *0xffffffff* is assumed. Since version:5.3.0 the special value *%unique* assigns a unique
246 75 Tobias Brunner
     value to each newly created IPsec SA (used e.g. in combination with the [[forecast]] or [[connmark]] plugins).
247 35 Andreas Steffen
248 57 Tobias Brunner
_mark_in = <value>[/<mask>]_
249 1 Martin Willi
250 1 Martin Willi
p((. sets an XFRM mark in the inbound IPsec SA and policy. If the mask is missing then
251 57 Tobias Brunner
     a default mask of *0xffffffff* is assumed.
252 57 Tobias Brunner
253 39 Gerd v. Egidy
_mark_out = <value>[/<mask>]_
254 35 Andreas Steffen
255 1 Martin Willi
p((. sets an XFRM mark in the outbound IPsec SA and policy. If the mask is missing then
256 23 Tobias Brunner
     a default mask of *0xffffffff* is assumed.
257 31 Martin Willi
258 21 Andreas Steffen
_mobike = *yes* | no_
259 1 Martin Willi
260 1 Martin Willi
p((. enables the IKEv2 [[MobIke|MOBIKE]] protocol defined by RFC 4555. If set to *no*, the charon
261 23 Tobias Brunner
     daemon will not actively propose [[MobIke|MOBIKE]] as initiator and ignore the MOBIKE_SUPPORTED
262 31 Martin Willi
     notify as responder.
263 23 Tobias Brunner
264 57 Tobias Brunner
_modeconfig = push | *pull*_
265 21 Andreas Steffen
266 1 Martin Willi
p((. defines which mode is used to assign a virtual IP. Currently relevant for IKEv1 only since IKEv2 always uses
267 1 Martin Willi
     the configuration payload in *pull* mode. Cisco VPN gateways usually operate in *push* mode.
268 70 Tobias Brunner
     In versions prior to [[5.1.1]] the charon daemon did not support *push* mode.
269 57 Tobias Brunner
270 21 Andreas Steffen
_reauth = *yes* | no_
271 31 Martin Willi
272 20 Andreas Steffen
p((. whether rekeying of an IKE_SA should also reauthenticate the peer. In IKEv1, reauthentication is always done.
273 1 Martin Willi
     In  IKEv2, a value of *no* rekeys without uninstalling the IPsec SAs, a value of *yes* (the default)
274 23 Tobias Brunner
     creates a new IKE_SA from scratch and tries to recreate all IPsec SAs.
275 23 Tobias Brunner
276 1 Martin Willi
_rekey = *yes* | no_
277 1 Martin Willi
278 1 Martin Willi
p((. whether a connection should be renegotiated when it is about to expire. The two ends need not agree, but
279 1 Martin Willi
     while a value of no prevents the daemon from requesting renegotiation, it does not prevent responding
280 58 Tobias Brunner
     to renegotiation requested from the other end, so no will be largely ineffective unless both ends agree on it.
281 58 Tobias Brunner
     Also see _reauth_.
282 1 Martin Willi
283 1 Martin Willi
_rekeyfuzz = *100%* | <percentage>_
284 1 Martin Willi
285 31 Martin Willi
p((. maximum percentage by which _marginbytes_, _marginpackets_ and _margintime_ should be randomly increased to randomize
286 1 Martin Willi
     rekeying intervals (important for hosts with many connections); acceptable values are an integer, which may exceed 100,
287 4 Martin Willi
     followed  by  a '%' .
288 77 Juergen Seifert
     The value of _marginTYPE_, after this random increase, must not exceed _lifeTYPE_ (where TYPE is one of bytes, packets or time).
289 31 Martin Willi
     The value _0%_ will suppress randomization. Relevant only locally, other end need not agree on it.
290 1 Martin Willi
     Also see [[ExpiryRekey|Expiry and Rekey]].
291 1 Martin Willi
292 1 Martin Willi
_rekeymargin_
293 1 Martin Willi
294 1 Martin Willi
p((.  synonym for _margintime_.
295 1 Martin Willi
296 71 Tobias Brunner
_replay_window = -1 | <number>_
297 71 Tobias Brunner
298 71 Tobias Brunner
p((. The  IPsec  replay  window  size  for  this connection. With the default of -1 the value configured with _charon.replay_window_  in
299 71 Tobias Brunner
     [[strongswan.conf]]  is used. Larger values than 32 are supported using the Netlink backend only, a  value  of  0  disables  IPsec
300 71 Tobias Brunner
     replay protection. Available since [[5.2.0]].
301 71 Tobias Brunner
302 1 Martin Willi
_reqid = <number>_
303 57 Tobias Brunner
304 26 Tobias Brunner
p((. sets the reqid for a given connection to a pre-configured fixed value.
305 57 Tobias Brunner
306 1 Martin Willi
_tfc = <value>_
307 57 Tobias Brunner
308 57 Tobias Brunner
p((. number of bytes to pad ESP payload data to. Traffic Flow Confidentiality is currently supported in IKEv2 and applies to outgoing packets only. The special value %mtu fills up ESP packets with padding to have the size of the MTU.
309 57 Tobias Brunner
310 57 Tobias Brunner
_type = *tunnel* | transport | transport_proxy | passthrough | drop_
311 1 Martin Willi
312 1 Martin Willi
p((. the type of the connection; currently the accepted values are *tunnel*, signifying a  host-to-host,
313 1 Martin Willi
     host-to-subnet, or subnet-to-subnet tunnel; *transport*, signifying host-to-host transport mode;
314 31 Martin Willi
     *transport_proxy*, signifying the special Mobile IPv6 transport proxy mode;
315 23 Tobias Brunner
     *passthrough*, signifying that no IPsec processing should be done at all; *drop*, signifying that packets
316 41 Tobias Brunner
     should be  discarded.
317 34 Tobias Brunner
318 57 Tobias Brunner
_xauth = *client* | server_
319 21 Andreas Steffen
320 1 Martin Willi
p((. specifies the role in the XAuth protocol if activated by _authby=xauthpsk_ or _authby=xauthrsasig_.
321 21 Andreas Steffen
322 23 Tobias Brunner
_xauth_identity = <id>_
323 20 Andreas Steffen
324 53 Tobias Brunner
p((. defines the identity/username the client uses to reply to an XAuth request. If not defined, the IKEv1 identity will be used as XAuth identity.
325 23 Tobias Brunner
326 20 Andreas Steffen
h2. left|right End Parameters
327 1 Martin Willi
328 1 Martin Willi
Connection descriptions are defined in terms of a left endpoint and a right endpoint. For example, the
329 1 Martin Willi
two parameters leftid and rightid specify the identity of the left and the right endpoint. For every
330 52 Tobias Brunner
connection description an attempt is made to figure out whether the local endpoint should act as the left or
331 52 Tobias Brunner
the right endpoint. This is done by matching the IP addresses defined for both endpoints with the
332 1 Martin Willi
IP addresses assigned to local network interfaces. If a match is found then the role (left or right) that
333 1 Martin Willi
matches is going to be considered "local". If no match is found during startup, "left" is considered "local".
334 1 Martin Willi
335 70 Tobias Brunner
_left|right = <ip address> | <fqdn> | *%any* | range | subnet_
336 52 Tobias Brunner
337 70 Tobias Brunner
p((. The IP address of the participant's public-network interface or one of several magic values.
338 57 Tobias Brunner
     The value _%any_ for the local endpoint signifies an address to be filled in
339 52 Tobias Brunner
     (by automatic keying) during negotiation. If the local peer initiates the connection setup the routing table
340 23 Tobias Brunner
     will be queried to determine the correct local IP address. In case the local peer is responding to a connection
341 1 Martin Willi
     setup then any IP address that is assigned to a local interface will be accepted.
342 1 Martin Willi
343 58 Tobias Brunner
p((. Prior to [[5.0.0]] specifying _%%any_ for the local endpoint was not supported for IKEv1 connections, instead
344 58 Tobias Brunner
     the keyword _%%defaultroute_ could be used, causing the value to be filled in automatically with the local
345 58 Tobias Brunner
     address of the default-route interface (as determined at IPsec startup time and during configuration
346 57 Tobias Brunner
     update). Either left or right may be _%defaultroute_, but not both.
347 57 Tobias Brunner
348 1 Martin Willi
p((. The prefix % in front of a fully-qualified domain name or an IP address will implicitly set _left|rightallowany=yes_.
349 1 Martin Willi
          
350 1 Martin Willi
p((. If _%any_ is used for the remote endpoint it literally means any IP address.
351 70 Tobias Brunner
352 70 Tobias Brunner
p((. Since [[5.1.1]] connections can be limited to a specific range of hosts. To do so a range (10.1.0.0-10.2.255.255)
353 70 Tobias Brunner
     or a subnet (10.1.0.0/16) can be specified, and multiple addresses, ranges and subnets can be separated by commas.
354 70 Tobias Brunner
     While one can freely combine these items, to initiate the connection at least one non-range/subnet is required.
355 1 Martin Willi
     
356 31 Martin Willi
p((. Please note that with the usage of wildcards multiple connection descriptions might match a given incoming
357 33 Tobias Brunner
     connection attempt. The most specific description is used in that case.
358 33 Tobias Brunner
359 33 Tobias Brunner
_left|rightallowany = yes | *no*_
360 1 Martin Willi
361 29 Daniel Mentz
p((. a modifier for _left|right_, making it behave as _%any_ although a concrete IP address has been
362 1 Martin Willi
     assigned. Recommended for dynamic IP addresses that can be resolved by DynDNS at IPsec startup or update time.
363 1 Martin Willi
364 1 Martin Willi
_left|rightauth = <auth method>_
365 1 Martin Willi
366 1 Martin Willi
p((. Authentication method to use locally (left) or require from the remote (right) side. Acceptable values are *pubkey*
367 1 Martin Willi
     for public key encryption (RSA/ECDSA), *psk* for pre-shared key authentication, *eap* to [require the] use of the Extensible Authentication Protocol, and *xauth* for IKEv1 eXtended Authentication.
368 1 Martin Willi
369 1 Martin Willi
p((. To require a trustchain public key strength for the remote side, specify the key type followed
370 1 Martin Willi
     by the minimum strength in bits (for example *ecdsa-384* or *rsa-2048-ecdsa-256*).
371 75 Tobias Brunner
     To limit the acceptable set of hashing algorithms for trustchain validation, append hash algorithms
372 75 Tobias Brunner
     to *pubkey* or a key strength definition (for example *pubkey-sha1-sha256* or *rsa-2048-ecdsa-256-sha256-sha384-sha512*).
373 82 Tobias Brunner
     Since version:5.3.0 and unless disabled in [[strongswan.conf]], or explicit IKEv2 signature constraints are
374 82 Tobias Brunner
     configured (see below), such key types and hash algorithms are also applied as constraints against IKEv2 signature
375 82 Tobias Brunner
     authentication schemes used by the remote side.
376 1 Martin Willi
377 1 Martin Willi
p((. Since version:5.3.0 and if both peers support "RFC 7427":http://tools.ietf.org/html/rfc7427 ("Signature  Authentication in IKEv2") specific hash
378 82 Tobias Brunner
     algorithms to be used during IKEv2 authentication may be configured. The syntax is the same as above,
379 82 Tobias Brunner
     but with _ike:_ prefix (before version:5.4.0 without that prefix).
380 82 Tobias Brunner
     For  example, with _ike:pubkey-sha384-sha256_ a public key signature scheme with either SHA-384 or SHA-256
381 75 Tobias Brunner
     would get used for authentication, in that order and depending on the hash algorithms supported by the peer.
382 75 Tobias Brunner
     If no specific hash algorithms are  configured, the default is to prefer an algorithm that matches or exceeds
383 75 Tobias Brunner
     the strength of the signature key.
384 82 Tobias Brunner
     If no constraints with _ike:_ prefix are configured any signature scheme constraint (without _ike:_ prefix) will
385 82 Tobias Brunner
     also apply to IKEv2 authentication, unless this is disabled in [[strongswan.conf]] (this is also the behavior before
386 82 Tobias Brunner
     version:5.4.0, which introduced the _ike:_ prefix).
387 75 Tobias Brunner
388 75 Tobias Brunner
p((. In the case of *eap*, an optional EAP method can be appended. Currently defined methods are *eap-aka*,
389 1 Martin Willi
     *eap-gtc*, *eap-md5*, *eap-mschapv2*, *eap-peap*, *eap-sim*, *eap-tls*, *eap-ttls*, *eap-dynamic*, and *eap-radius*.
390 75 Tobias Brunner
     Alternatively, IANA assigned EAP method numbers are accepted. Vendor specific EAP methods are defined
391 75 Tobias Brunner
     in the form *eap-type-vendor* (e.g. *eap-7-12345*).
392 75 Tobias Brunner
     Since version:5.3.0 signature and trust chain constraints for EAP-(T)TLS may be defined.  To do so, append a
393 75 Tobias Brunner
     colon to the EAP method, followed by the key type/size and hash algorithm as discussed above.
394 75 Tobias Brunner
     For *xauth*, an XAuth authentication backend can be specified, such as *xauth-generic* or *xauth-eap*.
395 75 Tobias Brunner
     If XAuth is used in _leftauth_, Hybrid authentication is used. For traditional XAuth authentication, define XAuth in _leftauth2_.
396 1 Martin Willi
397 57 Tobias Brunner
p((. Not supported for IKEv1 connections prior to [[5.0.0]].
398 27 Daniel Mentz
399 33 Tobias Brunner
400 58 Tobias Brunner
_left|rightauth2 = <auth method>_
401 58 Tobias Brunner
402 58 Tobias Brunner
p((. Same as _left|rightauth_, but defines an additional authentication exchange. In IKEv1, only XAuth can be used
403 57 Tobias Brunner
     in the second authentication round. IKEv2 supports multiple complete authentication rounds using
404 66 Andreas Steffen
     _Multiple Authentication Exchanges_ defined in "RFC 4739":http://tools.ietf.org/html/rfc4739. This allows e.g. a separate authentication of host and user.
405 7 Martin Willi
406 31 Martin Willi
p((. Not supported for IKEv1 connections prior to [[5.0.0]].
407 57 Tobias Brunner
    
408 23 Tobias Brunner
409 57 Tobias Brunner
_left|rightca = <issuer dn> | %same_
410 57 Tobias Brunner
411 58 Tobias Brunner
p((. the distinguished name of a certificate authority which is required to lie in the trust path going from the
412 56 Andreas Steffen
     _left|right_ participant's certificate up to the root certification authority.
413 1 Martin Willi
     *%same* means that the value configured for the other participant should be reused.
414 56 Andreas Steffen
415 23 Tobias Brunner
_left|rightca2 = <issuer dn> | %same_
416 21 Andreas Steffen
417 1 Martin Willi
p((. Same as _left|rightca_ but for the second authentication (IKev2 only).
418 1 Martin Willi
419 1 Martin Willi
_left|rightcert = <path>_
420 1 Martin Willi
421 23 Tobias Brunner
p((. the path to the left|right participant's X.509 certificate. The file can be coded either in PEM or DER format.
422 58 Tobias Brunner
     OpenPGP certificates are supported as well.  Both absolute paths or paths relative to
423 58 Tobias Brunner
     [[IpsecDirectoryCerts|/etc/ipsec.d/certs]] are accepted. By default _left|rightcert_ sets _left|rightid_
424 31 Martin Willi
     to the distinguished name of the certificate's subject. The _left|right_ participant's ID can be overridden
425 61 Tobias Brunner
     by specifying a _left|rightid_ value which must be certified by the certificate, though.
426 61 Tobias Brunner
427 61 Tobias Brunner
p((. Since [[5.0.2]] certificates can be configured in the form _%smartcard[<slot nr>[@<module>]]:<keyid>_, which
428 61 Tobias Brunner
     defines a specific certificate to load from a PKCS#11 backend for this connection (e.g. via the [[PKCS11Plugin|pkcs11 plugin]]).
429 61 Tobias Brunner
     See [[PinSecret|ipsec.secrets]] for details about smartcard definitions.
430 61 Tobias Brunner
     Defining a certificate on a smartcard with _left|rightcert_ is only required if the automatic selection via _left|rightid_
431 64 Tobias Brunner
     is not sufficient, for example, if multiple certificates use the same subject.
432 64 Tobias Brunner
433 64 Tobias Brunner
p((. Since [[5.0.3]] multiple certificate paths or PKCS#11 backends can be specified in a comma separated list.
434 64 Tobias Brunner
     The daemon chooses the certificate based on the received certificate requests, if possible, before enforcing
435 23 Tobias Brunner
     the first.
436 23 Tobias Brunner
437 57 Tobias Brunner
_left|rightcert2 = <path>_
438 21 Andreas Steffen
439 1 Martin Willi
p((. Same as _left|rightcert_ but for the second authentication round (IKEv2 only).
440 33 Tobias Brunner
441 7 Martin Willi
_left|rightcertpolicy = <OIDs>_
442 66 Andreas Steffen
443 1 Martin Willi
p((. Comma separated list of certificate policy OIDs the peer's certificate must have.
444 58 Tobias Brunner
     OIDs are specified using the numerical dotted representation. Not supported for IKEv1 connections prior to [[5.0.0]].
445 58 Tobias Brunner
446 58 Tobias Brunner
_left|rightdns = <servers>_
447 58 Tobias Brunner
448 58 Tobias Brunner
p((. Comma separated list of DNS server addresses to exchange as configuration attributes. On the initiator,
449 58 Tobias Brunner
     a server is a fixed IPv4/IPv6 address, or _%config4/%config6_ to request attributes without an address.
450 58 Tobias Brunner
     On the responder, only fixed IPv4/IPv6 addresses are allowed and define DNS servers assigned to the client.
451 1 Martin Willi
     Available since [[5.0.1]].
452 23 Tobias Brunner
453 1 Martin Willi
_left|rightfirewall = yes | *no*_
454 1 Martin Willi
455 1 Martin Willi
p((. whether the _left|right_ participant is doing forwarding-firewalling (including  masquerading)
456 1 Martin Willi
     using iptables for traffic from _left|rightsubnet_, which should be turned off for traffic to the
457 1 Martin Willi
     other subnet) once the connection is established. May not be used in the same connection description with
458 1 Martin Willi
     _left|rightupdown_. Implemented as a parameter to the default _ipsec _updown_ script. Relevant only
459 1 Martin Willi
     locally, other end need not agree on it.
460 23 Tobias Brunner
461 20 Andreas Steffen
p((. If one or  both security gateways are doing forwarding firewalling (possibly including masquerading),
462 23 Tobias Brunner
     and this is specified using the firewall parameters, tunnels  established with  IPsec  are exempted from
463 57 Tobias Brunner
     it so that packets can flow unchanged through the tunnels. (This means that all subnets connected in this
464 1 Martin Willi
     manner must have distinct, non-overlapping subnet address blocks.)  This is done by the default 
465 1 Martin Willi
     _ipsec _updown_ script.
466 1 Martin Willi
467 1 Martin Willi
p((. In situations calling for more control, it may be preferable for the user to supply his own _updown_ script,
468 1 Martin Willi
     which makes the appropriate adjustments for his system.
469 1 Martin Willi
470 31 Martin Willi
_left|rightgroups = <group list>_
471 58 Tobias Brunner
472 58 Tobias Brunner
p((. a comma-separated list of group names. If the _left|rightgroups_ parameter is present then the peer must
473 57 Tobias Brunner
     be a member of at least one of the groups defined by the parameter. Groups may be used together with the
474 58 Tobias Brunner
     [[EapRadius#Group-selection|eap-radius]] plugin.
475 1 Martin Willi
476 58 Tobias Brunner
_left|rightgroups2 = <group list>_
477 58 Tobias Brunner
478 58 Tobias Brunner
p((. Same as _left|rightgroups_ but for the second authentication round defined with _left|rightauth2_.
479 1 Martin Willi
     Available since [[5.0.1]].
480 1 Martin Willi
481 1 Martin Willi
_left|righthostaccess = yes | *no*_
482 1 Martin Willi
483 1 Martin Willi
p((. inserts a pair of INPUT and OUTPUT iptables rules using the default _ipsec _updown_ script,
484 33 Tobias Brunner
     thus allowing access to the host itself in the case where the host's internal interface is part
485 23 Tobias Brunner
     of the negotiated client subnet. 
486 57 Tobias Brunner
487 73 Tobias Brunner
_left|rightid = <id>_
488 73 Tobias Brunner
489 79 Tobias Brunner
p((. how the _left|right_ participant should be identified for authentication; defaults to _left|right_ or the subject of the
490 79 Tobias Brunner
     certificate configured with _left|rightcert_.  If _left|rightcert_ is configured the identity has to be confirmed by the
491 79 Tobias Brunner
     certificate, that is, it has to match the full subject DN or one of the subjectAltName extensions contained in the
492 79 Tobias Brunner
     certificate.
493 1 Martin Willi
494 79 Tobias Brunner
p((. Can be an IP address, a fully-qualified domain name, an email address or a Distinguished Name for which the
495 79 Tobias Brunner
     ID type is determined automatically and the string is converted to the appropriate encoding. The rules for this
496 79 Tobias Brunner
     conversion are described on [[IdentityParsing]].  In versions before [[5.0.0]] fully-qualified domain names can be
497 79 Tobias Brunner
     preceded by an @ to avoid them being resolved to an IP address.
498 73 Tobias Brunner
499 79 Tobias Brunner
p((. In certain special situations the identity parsing above might be inadequate or produce the wrong result.
500 79 Tobias Brunner
     Examples are the need to encode a FQDN as KEY_ID or the string parser being unable to produce the correct
501 79 Tobias Brunner
     binary ASN.1 encoding of a certificate's DN. For these situations it is possible since version:5.2.2 to enforce a specific
502 79 Tobias Brunner
     identity type and to provide the binary encoding of the identity.  To do this a prefix may be used, followed by a
503 79 Tobias Brunner
     colon (:). If the number sign (#) follows the colon, the remaining data is interpreted as hex encoding, otherwise
504 79 Tobias Brunner
     the string is used as is as the identification data. *Note:* The latter implies that no conversion is performed for
505 79 Tobias Brunner
     non-string identities. For example, _ipv4:10.0.0.1_ does not create a valid ID_IPV4_ADDR IKE identity, as it does not
506 79 Tobias Brunner
     get converted to binary 0x0a000001. Instead, one could use _ipv4:#0a000001_ to get a valid identity, but just using
507 79 Tobias Brunner
     the implicit type with [[IdentityParsing|automatic conversion]] is usually simpler. The same applies to the ASN.1 encoded types.
508 58 Tobias Brunner
     The following prefixes are known: _ipv4, ipv6, rfc822, email, userfqdn, fqdn, dns, asn1dn, asn1gn_ and _keyid_.
509 58 Tobias Brunner
     Custom type prefixes may be specified by surrounding the numerical type value with curly brackets.
510 58 Tobias Brunner
511 58 Tobias Brunner
p((. Since [[5.0.1]] _rightid_ for IKEv2 connections optionally takes a % as prefix in front of the identity.
512 58 Tobias Brunner
     If given it prevents the daemon from sending IDr in its IKE_AUTH request and will allow it to verify the 
513 58 Tobias Brunner
     configured identity against the subject and subjectAltNames contained in the responder's certificate (otherwise,
514 33 Tobias Brunner
     it is only compared with the IDr returned by the responder). The IDr sent by the initiator might otherwise 
515 7 Martin Willi
     prevent the responder from finding a config if it has configured a different value for _leftid_.
516 23 Tobias Brunner
517 23 Tobias Brunner
_left|rightid2 = <id>_
518 21 Andreas Steffen
519 1 Martin Willi
p((. Identity to use for the second authentication of the left participant (IKEv2 only).
520 1 Martin Willi
     Defaults to _left|rightid_.
521 1 Martin Willi
522 1 Martin Willi
_leftikeport = <port>_
523 58 Tobias Brunner
524 58 Tobias Brunner
p((. UDP port the left participant uses for IKE communication. If unspecified, port 500 is used with the port
525 63 Tobias Brunner
     floating to 4500 if a NAT is detected or MOBIKE is enabled.
526 63 Tobias Brunner
     Specifying a local IKE port different from the default additionally requires a socket implementation that
527 63 Tobias Brunner
     listens to this port. Not supported for IKEv1 connections prior to [[5.0.0]].
528 70 Tobias Brunner
529 70 Tobias Brunner
_left|rightprotoport = <protocol>/<port>_
530 67 Tobias Brunner
531 1 Martin Willi
p((. restrict the traffic selector to a single protocol and/or port.  Since [[5.1.0]] this option is deprecated
532 1 Martin Willi
     as protocol/port information can be defined for each subnet directly in _left|rightsubnet_.
533 67 Tobias Brunner
534 67 Tobias Brunner
_left|rightrsasigkey = <raw rsa public key> | <path to public key>_
535 72 Tobias Brunner
536 1 Martin Willi
p((. Since [[5.1.0]] a synonym for _left|rightsigkey_. Before that it denoted the left|right participant's public key
537 67 Tobias Brunner
for RSA signature authentication, in RFC 2537 format using hex (0x prefix) or base64 (0s prefix) encoding.
538 67 Tobias Brunner
Also accepted was the path to a file containing the public key in PEM or DER encoding.
539 72 Tobias Brunner
540 1 Martin Willi
_left|rightsigkey = <raw public key> | <path to public key>_
541 72 Tobias Brunner
542 67 Tobias Brunner
p((. Added with [[5.1.0]]. The left|right participant's public key for public key signature authentication, in PKCS#1
543 72 Tobias Brunner
format using  using hex (0x prefix) or base64 (0s prefix) encoding. With the optional _dns:_ or _ssh:_ prefix in front
544 72 Tobias Brunner
of 0x or 0s, the public key is expected in either the RFC 3110 (not the full RR, only the RSA key part) or
545 1 Martin Willi
RFC 4253 public key format, respectively.
546 1 Martin Willi
Also accepted is the path to a file containing the public key in PEM, DER or SSH encoding. Both absolute paths or
547 1 Martin Willi
paths relative to [[ipsecdirectorycerts|/etc/ipsec.d/certs]] are accepted.
548 58 Tobias Brunner
549 1 Martin Willi
_left|rightsendcert = never | no | *ifasked* | always | yes_
550 58 Tobias Brunner
551 58 Tobias Brunner
p((. Accepted values are *never* or *no*, *always* or *yes*, and *ifasked*, the latter meaning that 
552 58 Tobias Brunner
     the peer must send a certificate request (CR) payload in order to get a certificate in return.
553 58 Tobias Brunner
554 58 Tobias Brunner
_leftsourceip = %config4 | %config6 | <ip address>_
555 31 Martin Willi
556 23 Tobias Brunner
p((. The internal source IP to use in a tunnel, also known as [[VirtualIp|virtual IP]].
557 1 Martin Willi
     If the value is one of the synonyms _%config_, _%cfg_, _%modeconfig_ or _%modecfg_, an address (from
558 57 Tobias Brunner
     the tunnel address family) is requested from the peer.
559 1 Martin Willi
     Since [[5.0.1]] a comma-separated list is accepted to request multiple addresses, and with _%config4_ and
560 1 Martin Willi
     _%config6_ an address of the given address family will be requested explicitly.
561 73 Tobias Brunner
     If an IP address is configured, it will be requested from the responder, which is free to respond with a
562 7 Martin Willi
     different address.
563 23 Tobias Brunner
564 31 Martin Willi
_rightsourceip = %config | <network>/<netmask> | <from>-<to> | %poolname_
565 73 Tobias Brunner
566 73 Tobias Brunner
p((. The internal source IP to use in a tunnel for the remote peer. If the value is %config on the responder
567 1 Martin Willi
     side, the initiator must propose an address which is then echoed back. Also supported are address pools
568 73 Tobias Brunner
     expressed as _<network>/<netmask>_ and _<from>-<to>_ (since version:5.2.2) or the use of an external IP address pool
569 57 Tobias Brunner
     using _%%poolname_ where _poolname_ is the name of the IP address pool used for the lookup (see [[VirtualIp|virtual IP]] for details).
570 67 Tobias Brunner
     Since [[5.0.1]] a comma-separated list of IP addresses / pools is accepted, for instance, to define pools of
571 1 Martin Willi
     different address families.
572 1 Martin Willi
573 1 Martin Willi
_left|rightsubnet = <ip subnet>![[<proto/port>]][,...]_
574 1 Martin Willi
575 57 Tobias Brunner
p((. private subnet behind the left participant, expressed as network/netmask; if omitted, essentially assumed
576 58 Tobias Brunner
     to be _left_/32|128, signifying that the _left|right_ end of the connection goes to the _left|right_ participant only.
577 58 Tobias Brunner
     The configured subnets of the peers may differ, the protocol narrows it to the greatest common subnet.
578 58 Tobias Brunner
     Since [[5.0.0]] this is also done for IKEv1, but as this may lead to problems with other implementations,
579 58 Tobias Brunner
     make sure to configure identical subnets in such configurations.
580 1 Martin Willi
     IKEv2 supports multiple subnets separated by commas, IKEv1 only interprets the first subnet of such a definition,
581 1 Martin Willi
     unless the Cisco Unity extension plugin is enabled (available since [[5.0.1]]). 
582 70 Tobias Brunner
583 70 Tobias Brunner
p((. Since [[5.1.0]] the optional part after each subnet enclosed in square brackets specifies a protocol/port to restrict
584 70 Tobias Brunner
     the selector for that subnet. *Examples:* leftsubnet=10.0.0.1[tcp/http],10.0.0.2[6/80] or leftsubnet=fec1::1[udp],10.0.0.0/16[/53].
585 70 Tobias Brunner
     Instead of omitting either value _%any_ can be used to the same effect, e.g. leftsubnet=fec1::1[udp/%any],10.0.0.0/16[%any/53].
586 70 Tobias Brunner
587 67 Tobias Brunner
p((. Since [[5.1.1]], if the protocol is _icmp_ or _ipv6-icmp_ the port is interpreted as ICMP message type if it is less than 256,
588 67 Tobias Brunner
     or as type and code if it greater or equal to 256, with the type in the most significant 8 bits and the code in the
589 67 Tobias Brunner
     least significant 8 bits.
590 67 Tobias Brunner
591 67 Tobias Brunner
p((. The port value can alternatively take the value _%opaque_ for RFC 4301 OPAQUE selectors, or a numerical range
592 67 Tobias Brunner
     in the form 1024-65535. None of the kernel backends currently supports opaque or port ranges and uses _%any_
593 67 Tobias Brunner
     for policy installation instead.
594 67 Tobias Brunner
595 23 Tobias Brunner
p((. Instead of specifying a subnet, _%dynamic_ can be used to replace it with the IKE address, having the same effect
596 21 Andreas Steffen
     as omitting _left|rightsubnet_ completely. Using _%dynamic_ can be used to define multiple dynamic selectors,
597 1 Martin Willi
     each having a potentially different protocol/port definition.
598 31 Martin Willi
599 1 Martin Willi
_left|rightupdown = <path>_
600 33 Tobias Brunner
601 33 Tobias Brunner
p((. what _updown_ script to run to adjust routing and/or firewalling when the status of the connection
602 33 Tobias Brunner
     changes (default _ipsec _updown_). Relevant only locally, other end need not agree on it.
603 33 Tobias Brunner
     Charon uses the _updown_ script to insert firewall rules only, since routing has been implemented directly
604 33 Tobias Brunner
     into the daemon.
605 33 Tobias Brunner
606 33 Tobias Brunner
h2. IKEv2 Mediation Extension Parameters
607 23 Tobias Brunner
608 23 Tobias Brunner
The following parameters are relevant to IKEv2 Mediation Extension operation only.
609 31 Martin Willi
610 57 Tobias Brunner
_mediation = yes | *no*_
611 57 Tobias Brunner
612 57 Tobias Brunner
p((. whether this connection is a mediation connection,  ie.  whether this connection is used to mediate other
613 57 Tobias Brunner
     connections.  Mediation connections create no child SA. Acceptable values  are  no (the default) and yes.
614 57 Tobias Brunner
615 21 Andreas Steffen
_mediated_by = <name>_
616 1 Martin Willi
617 31 Martin Willi
p((. the  name  of the connection to mediate this connection through. If given, the connection will  be  mediated
618 1 Martin Willi
     through  the  named mediation  connection.  The mediation connection must set *mediation=yes*.
619 57 Tobias Brunner
620 1 Martin Willi
_me_peerid = <id>_
621 1 Martin Willi
622 58 Tobias Brunner
p((. ID as which the peer is known to the mediation server, ie. which the  other end of this connection uses as
623 58 Tobias Brunner
     its leftid on its connection to the mediation server.  This is the ID we request  the mediation server to
624 58 Tobias Brunner
     mediate us with.  If me_peerid is not given, the rightid of this connection will be used as peer ID.
625 58 Tobias Brunner
626 58 Tobias Brunner
h2. Removed parameters (since 5.0.0)
627 58 Tobias Brunner
628 58 Tobias Brunner
_auth = *esp* | ah_
629 58 Tobias Brunner
630 69 Tobias Brunner
p((. whether authentication should be done as part of ESP encryption, or separately using the AH protocol.
631 69 Tobias Brunner
	Only supported by the IKEv1 daemon pluto.
632 58 Tobias Brunner
633 58 Tobias Brunner
p((. Since [[5.1.1]] the *ah* keyword can be used to configure AH with the charon IKE daemon.
634 58 Tobias Brunner
635 58 Tobias Brunner
_pfs = *yes* | no_
636 58 Tobias Brunner
637 58 Tobias Brunner
p((. whether _Perfect Forward Secrecy_ of keys is desired on the connection's keying channel (with PFS,
638 58 Tobias Brunner
     penetration of the key-exchange protocol does not compromise keys negotiated earlier). IKEv2 always uses
639 58 Tobias Brunner
     PFS for IKE_SA rekeying whereas for CHILD_SA rekeying PFS is enforced by defining a Diffie-Hellman dhgroup
640 58 Tobias Brunner
     in the _esp_ parameter.  Since [[5.0.0]] the latter also applies to IKEv1 and this parameter has no effect anymore.
641 58 Tobias Brunner
642 58 Tobias Brunner
_pfsgroup = <modp group>_
643 58 Tobias Brunner
644 58 Tobias Brunner
p((. defines a Diffie-Hellman group for _perfect forward secrecy_ in IKEv1 Quick Mode differing from the DH group
645 58 Tobias Brunner
     used for IKEv1 Main Mode (IKEv1 pluto daemon only).
646 58 Tobias Brunner
647 58 Tobias Brunner
_left|rightnexthop = %direct | %defaultroute | <ip address> | <fqdn>_
648 58 Tobias Brunner
649 58 Tobias Brunner
p((. This parameter is usually not needed any more because the NETKEY IPsec stack does not require
650 58 Tobias Brunner
     explicit routing entries for the traffic to be tunneled. If _left|sourceip_ is used with IKEv1
651 58 Tobias Brunner
     then _left|rightnexthop_ must still be set in order for the source routes to work properly.
652 58 Tobias Brunner
653 58 Tobias Brunner
_left|rightsubnetwithin = <ip subnet>_
654 1 Martin Willi
655 1 Martin Willi
p((. the  peer can propose any subnet or single IP address that fits within the range defined by
656 1 Martin Willi
     _left|rightsubnetwithin_.  Is a synonym for _left|rightsubnet_ since [[5.0.0]], as subnets are narrowed.