ipsec.conf: conn Reference » History » Version 6
= conn <name> =
'''general per connection parameters:'''
- ''ah = ''<algorithms>
AH authentication algorithm to be used for the connection, e.g. ''hmac-md5''.
- ''also = ''<section name>
includes conn section <name>.
- ''auth = '''esp'''|ah''
whether authentication should be done as part of ESP encryption, or separately using the AH protocol.
The IKEv2 daemon currently supports ESP only.
- ''authby = '''rsasig'''|psk|secret|xauthrsasig|xauthpsk|eap|never''
how the two security gateways should authenticate each other; acceptable values are ''secret'' or ''psk''
for shared secrets, ''rsasig'' for RSA digital signatures, and ''never'' if negotiation is never to be
attempted or accepted (useful for shunt-only conns). Digital signatures are superior in every way to shared
secrets. In IKEv2, the two ends must not agree on this parameter, it is relevant for the out-bound
authentication method only. IKEv1 additionally supports the values ''xauthpsk'' and ''xauthrsasig'' that
will enable ''eXtended AUTHentication (XAUTH)'' in addition to IKEv1 main mode based on shared secrets
or digital RSA signatures, respectively. IKEv2 additionally supports the value ''eap'', which indicates
an initiator to request EAP authentication. The EAP method to use is selected by the server (see ''eap'').
- ''auto = '''ignore'''|add|route|start''
what operation, if any, should be done automatically at IPsec startup. ''add'' loads a connection without
starting it. ''route'' loads a connection and installs kernel traps. If traffic is detected between
''leftsubnet'' and ''rightsubnet'', a connection is established. ''start'' loads a connection and brings
it up immediatly. ''ignore'' ignores the connection. This is equal to delete a connection from the config
file. Relevant only locally, other end need not agree on it (but in general, for an intended-to-be-permanent
connection, both ends should use ''auto=start'' to ensure that any reboot causes immediate renegotiation).
- ''compress = yes|'''no'''''
whether IPComp compression of content is proposed on the connection (link-level compression does not work on
encrypted data, so to be effective, compression must be done before encryption). A value of ''yes'' causes IPsec
to propose both compressed and uncompressed, and prefer compressed. A value of no prevents IPsec from proposing
compression; a proposal to compress will still be accepted. IKEv2 does not support IP compression yet.
- ''dpdaction = '''none'''|clear|hold|restart''
controls the use of the Dead Peer Detection protocol (DPD, RFC 3706) where R_U_THERE notification messages
(IKEv1) or empty INFORMATIONAL messages (IKEv2) are periodically sent in order to check the liveliness of the
IPsec peer. The values ''clear'', ''hold'', and ''restart'' all activate DPD. If no activity is detected,
all connections with a dead peer are stopped and unrouted (''clear''), put in the hold state (''hold'')
or restarted (''restart''). For IKEv1, the default is ''none'' which disables the active sending of
R_U_THERE notifications. Nevertheless Pluto will always send the DPD Vendor ID during connection set up
in order to signal the readiness to act passively as a responder if the peer wants to use DPD. For IKEv2,
''none'' does't make sense, since all messages are used to detect dead peers. If specified, it has the
same meaning as the default (''clear'').
- ''dpddelay = ''<time>
defines the period time interval with which R_U_THERE messages/INFORMATIONAL exchanges are sent to the peer.
These are only sent if no other traffic is received. In IKEv2, a value of 0 sends no additional INFORMATIONAL
messages and uses only standard messages (such as those to rekey) to detect dead peers.
- ''dpdtimeout = ''<time>
defines the timeout interval, after which all connections to a peer are deleted in case of inactivity.
This only applies to IKEv1, in IKEv2 the default retransmission timeout applies, as every exchange is used to
detect dead peers.
- ''eap = aka|sim''
defines the EAP type to be used if ''authby=eap'' is selected. Currently supported values are ''aka'' for EAP-AKA
and ''sim'' for EAP-SIM.
- ''esp = ''<cipher suites>
comma-separated list of ESP encryption/authentication algorithms to be used for the connection, e.g.
''3des-md5''. The notation is ''encryption-integrity-[dhgroup]''. If ''dh-group'' is specified,
CHILD_SA setup and rekeying include a separate Diffe-Hellman exchange (IKEv2 only).
- ''ike = ''<cipher suites>
comma-separated list of IKE/ISAKMP SA encryption/authentication algorithms to be used, e.g.
''aes128-sha1-modp2048''. The notation is ''encryption-integrity-dhgroup''. In IKEv2, multiple algorithms
and proposals may be included, such as ''aes128-aes256-sha1-modp1536-modp2048,3des-sha1-md5-modp1024''.
- ''ikelifetime = '''3h'''|''<time>
how long the keying channel of a connection (''ISAKMP or IKE SA'') should last before being renegotiated.
- ''keyexchange = '''ike'''|ikev1|ikev2''
method of key exchange; which protocol should be used to initialize the connection. Connections marked with
''ikev1'' are initiated with Pluto, those marked with ''ikev2'' with Charon. An incoming request from
the remote peer is handled by the correct daemon, unaffected from the ''keyexchange'' setting. The default
value ''ike' currently is a synonym for ''ikev1''.
- ''keyingtries = '''%forever'''''|<number>
how many attempts (a whole number or ''%forever'') should be made to negotiate a connection, or a replacement
for one, before giving up. The value ''%forever'' means 'never give up'. Relevant only locally, other end need
not agree on it.
- ''keylife = '''1h'''|''<time>
how long a particular instance of a connection (a set of encryption/authentication keys for user packets)
should last, from successful negotiation to expiry; acceptable values are an integer optionally followed by
''s'' (a time in seconds) or a decimal number followed by ''m'', ''h'', or ''d'' (a time in minutes, hours,
or days respectively) (default ''1h'', maximum ''24h''). Normally, the connection is renegotiated (via the
keying channel) before it expires. The two ends need not exactly agree on ''keylife'', although if they
do not, there will be some clutter of superseded connections on the end which thinks the lifetime is longer.
- ''mobike = '''yes'''|no''
enables the IKEv2 [wiki:MobIke MOBIKE] protocol defined by RFC 4555. If set to ''no'', the IKEv2 charon
daemon will not actively propose [wiki:MobIke MOBIKE] but will still accept and support as a responder.
- ''modeconfig = push|'''pull'''''
defines which mode is used to assign a virtual IP. Currently relevant for IKEv1 only since IKEv2 always uses
the configuration payload in ''pull' mode. Cisco VPN gateways usually operate in ''push' mode.
- ''pfs = '''yes'''|no''
whether ''Perfect Forward Secrecy'' of keys is desired on the connection's keying channel (with PFS,
penetration of the key-exchange protocol does not compromise keys negotiated earlier). IKEv2 always uses
PFS for IKE_SA rekeying whereas for CHILD_SA rekeying PFS is enforced by defining a Diffie-Hellman dhgroup
in the ''esp'' parameter.
- ''reauth = '''yes'''|no''
whether rekeying of an IKE_SA should also reauthenticate the peer. In IKEv1, reauthentication is always done.
In IKEv2, a value of ''no'' rekeys without uninstalling the IPsec SAs, a value of ''yes'' (the default)
creates a new IKE_SA from scratch and tries to recreate all IPsec SAs.
- ''rekey = '''yes'''|no''
whether a connection should be renegotiated when it is about to expire. The two ends need not agree, but
while a value of no prevents Pluto/Charon from requesting renegotiation, it does not prevent responding
to renegotiation requested from the other end, so no will be largely ineffective unless both ends agree on it.
- ''rekeyfuzz = '''100%'''|''<percentage>
maximum percentage by which rekeymargin should be randomly increased to randomize rekeying intervals (important
for hosts with many connections); acceptable values are an integer, which may exceed 100, followed by a '%' .
The value of ''rekeymargin'', after this random increase, must not exceed ''keylife''. The value ''0%'' will
suppress time randomization. Relevant only locally, other end need not agree on it.
- ''rekeymargin = '''9m'''|''<time>
how long before connection expiry or keying-channel expiry should attempts to negotiate a replacement begin.
Relevant only locally, other end need not agree on it.
- ''type = '''tunnel'''|transport|passthrough|drop|reject''
the type of the connection; currently the accepted values are ''tunnel'', signifying a host-to-host,
host-to-subnet, or subnet-to-subnet tunnel; ''transport'', signifying host-to-host transport mode;
''passthrough'', signifying that no IPsec processing should be done at all; ''drop'', signifying that packets
should be discarded; and ''reject'', signifying that packets should be discarded and a diagnostic ICMP
returned. Charon currently supports only ''tunnel'' and ''transport'' connection types.
- ''xauth = '''client'''|server''
specifies the role in the XAUTH protocol if activated by ''authby=xauthpsk'' or ''authby=xauthrsasig''.
'''left|right end parameters:'''
- ''left|right = ''<host>|''%defaultroute|%any''
- ''left|rightallowany = yes|'''no'''''
- ''left|rightca = ''<issuer dn>|''%same''
- ''left|rightcert = ''<path>
- ''left|rightfirewall = yes|'''no'''''
- ''left|rightgroups = ''<group list>
- ''left|righthostaccess = yes|'''no'''''
- ''left|rightid = ''<id>
- ''left|rightnexthop = %direct|%defaultroute|''<host>
- ''left|rightprotoport = ''<protocol>/<port>
- ''left|rightrsasigkey = '''%cert'''|''<raw rsa public key>
- ''left|rightsendcert = yes|no|always|ifasked|never''
- ''left|rightsourceip = %config|%cfg|%modeconfig|%modecfg|''<ip address>
- ''left|rightsubnet = ''<ip subnet>
- ''left|rightsubnetwithin = ''<ip subnet>
- ''left|rightupdown = ''<path>''