ipsec.conf: conn Reference » History » Version 41

Tobias Brunner, 19.10.2010 16:18
Added missing default values, cleaned up some other stuff.

1 21 Andreas Steffen
h1. conn <name>
2 1 Martin Willi
3 1 Martin Willi
4 23 Tobias Brunner
h2. general per connection parameters
5 21 Andreas Steffen
6 36 Andreas Steffen
_aaa_identity = <id>_
7 36 Andreas Steffen
8 36 Andreas Steffen
p((. defines the identity of the AAA backend used during IKEv2 EAP authentication. This is required if
9 36 Andreas Steffen
     the EAP client uses a method that verifies the server identity (such as EAP-TLS), but it does not
10 36 Andreas Steffen
     match the IKEv2 gateway identity.
11 36 Andreas Steffen
12 23 Tobias Brunner
_also = <section name>_
13 31 Martin Willi
14 23 Tobias Brunner
p((. includes conn section <name>.
15 1 Martin Willi
16 23 Tobias Brunner
_auth = *esp* | ah_
17 31 Martin Willi
18 23 Tobias Brunner
p((. whether authentication should be done as part of ESP encryption, or separately using the AH protocol.
19 1 Martin Willi
     The IKEv2 daemon currently supports ESP only.
20 1 Martin Willi
21 24 Andreas Steffen
_authby = *pubkey* | rsasig | ecdsasig | psk | secret | xauthrsasig | xauthpsk | eap | never_
22 31 Martin Willi
23 1 Martin Willi
p((. how the two security gateways should authenticate each other; acceptable values are *secret* or *psk*
24 25 Andreas Steffen
     for pre-shared secrets, *pubkey* for public key signatures as well as the synonyms *rsasig* for RSA digital
25 24 Andreas Steffen
     signatures and *ecdsasig* for Elliptic Curve DSA signatures. *never*  can be used if  negotiation is  never
26 24 Andreas Steffen
     to be attempted or accepted (useful for shunt-only conns). Digital signatures are superior in every way to
27 24 Andreas Steffen
     shared secrets. In IKEv2, the two ends must not agree on this parameter, it is relevant for the out-bound 
28 21 Andreas Steffen
     authentication  method only. IKEv1 additionally supports the values *xauthpsk* and *xauthrsasig* that
29 21 Andreas Steffen
     will enable _eXtended AUTHentication (XAUTH)_ in addition to IKEv1 main mode based on shared secrets
30 21 Andreas Steffen
     or digital RSA signatures,  respectively. IKEv2 additionally supports the value *eap*, which indicates
31 21 Andreas Steffen
     an initiator to request EAP authentication. The EAP method to use is selected by the server (see _eap_).
32 20 Andreas Steffen
     This parameter is deprecated for IKEv2 connections, as two peers do ot need to agree on an authentication
33 21 Andreas Steffen
     method. Use the _left|rightauth_ parameter to define authentication methods in IKEv2.
34 20 Andreas Steffen
35 23 Tobias Brunner
_auto = *ignore* | add | route | start_
36 31 Martin Willi
37 23 Tobias Brunner
p((. what operation, if any, should be done automatically at IPsec startup. *add* loads a connection without
38 21 Andreas Steffen
     starting it. *route* loads a connection and installs kernel traps. If traffic is detected between
39 21 Andreas Steffen
     _leftsubnet_ and _rightsubnet_, a connection is established. *start* loads a connection and brings
40 21 Andreas Steffen
     it up immediatly. *ignore* ignores the connection. This is equal to delete a connection from the config
41 1 Martin Willi
     file. Relevant only locally, other end need not agree on it (but in general, for an intended-to-be-permanent
42 23 Tobias Brunner
     connection, both ends should use _auto = *start*_ to ensure that any reboot causes immediate renegotiation).
43 1 Martin Willi
44 23 Tobias Brunner
_compress = yes | *no*_
45 31 Martin Willi
46 23 Tobias Brunner
p((. whether IPComp compression of content is proposed on the connection (link-level compression does not work on
47 21 Andreas Steffen
     encrypted data, so to be effective, compression must be done before encryption). A value of *yes* causes IPsec
48 4 Martin Willi
     to propose both compressed and  uncompressed, and  prefer compressed. A value of no prevents IPsec from proposing
49 33 Tobias Brunner
     compression; a proposal to compress will still be accepted.
50 1 Martin Willi
51 23 Tobias Brunner
_dpdaction = *none* | clear | hold | restart_
52 31 Martin Willi
53 23 Tobias Brunner
p((. controls the use of the Dead Peer Detection protocol (DPD, RFC 3706) where R_U_THERE notification messages
54 1 Martin Willi
     (IKEv1) or empty INFORMATIONAL messages (IKEv2) are periodically sent in order to check the liveliness of the
55 21 Andreas Steffen
     IPsec peer. The values *clear*, *hold*, and *restart* all activate DPD. If no activity is detected,
56 21 Andreas Steffen
     all  connections with a dead peer are stopped and unrouted (*clear*), put in the hold state (*hold*)
57 21 Andreas Steffen
     or restarted (*restart*). For IKEv1, the default is *none* which disables the active sending of
58 1 Martin Willi
     R_U_THERE  notifications. Nevertheless Pluto will always send the DPD Vendor ID during connection set up
59 1 Martin Willi
     in order to signal the readiness to act passively as a responder if the peer wants to use DPD. For IKEv2,
60 1 Martin Willi
     *none* does't make sense, since all messages are used to detect dead peers. If specified, it has the
61 21 Andreas Steffen
     same meaning as the default (*clear*).
62 21 Andreas Steffen
63 41 Tobias Brunner
_dpddelay = *30s* | <time>_
64 1 Martin Willi
65 31 Martin Willi
p((. defines  the  period time interval with which R_U_THERE messages/INFORMATIONAL exchanges are sent to the peer.
66 23 Tobias Brunner
     These are only sent if no other traffic is received. In IKEv2, a value of 0 sends no additional INFORMATIONAL
67 1 Martin Willi
     messages and uses only standard messages (such as those to rekey) to detect dead peers.
68 1 Martin Willi
69 41 Tobias Brunner
_dpdtimeout = *150s* | <time>_
70 31 Martin Willi
71 23 Tobias Brunner
p((. defines the timeout interval, after which all connections to a peer are deleted in case of inactivity.
72 41 Tobias Brunner
     This only applies to IKEv1, in IKEv2 the default [[Retransmission|retransmission timeout]] applies, as every exchange is used to
73 1 Martin Willi
     detect dead peers.
74 20 Andreas Steffen
75 1 Martin Willi
_inactivity = <time>_
76 30 Martin Willi
77 31 Martin Willi
p((. defines the timeout interval, after which a CHILD_SA is closed if it did not send or receive any traffic.
78 30 Martin Willi
     Currently supported in IKEv2 connections only.
79 30 Martin Willi
80 1 Martin Willi
_eap = aka | gtc | md5 | mschapv2 | radius | sim | <type> | <type>-<vendor>_
81 23 Tobias Brunner
82 41 Tobias Brunner
p((. defines the EAP type to propose as server if the client requests EAP authentication. Currently supported values are *aka*
83 23 Tobias Brunner
     for EAP-AKA, *gtc* for EAP-GTC, *md5* for EAP-MD5, *mschapv2* for EAP-MS-CHAPv2, *radius* for the
84 21 Andreas Steffen
     EAP-RADIUS proxy  and *sim* for EAP-SIM.
85 21 Andreas Steffen
     Additionally, IANA assigned EAP method numbers are accepted, or a definition in the form *eap=type-vendor*
86 21 Andreas Steffen
     (e.g. eap=7-12345 ) can be used to specify vendor specific EAP types. For IKEv2 this parameter is deprecated
87 1 Martin Willi
     in favour of _left|rightauth_.
88 41 Tobias Brunner
     To forward EAP authentication to a RADIUS server using the [[EapRadius|EAP-RADIUS plugin]], set *eap=radius*.
89 5 Martin Willi
90 23 Tobias Brunner
_eap_identity = <id>_
91 1 Martin Willi
92 31 Martin Willi
p((. defines the identity the client uses to reply to an EAP Identity request. If defined on the EAP server, the defined
93 23 Tobias Brunner
     identity  will be used as peer identity during EAP authentication. The special value _%identity_ uses the EAP Identity method
94 14 Martin Willi
     to ask the client for a EAP identity. If not defined, the IKEv2 identity will be used as EAP identity.
95 1 Martin Willi
96 1 Martin Willi
_esp = <cipher suites>_
97 23 Tobias Brunner
98 23 Tobias Brunner
p((. comma-separated list of ESP encryption/authentication algorithms to be used for the connection, e.g.
99 41 Tobias Brunner
     _aes128-sha256_. The notation is _encryption-integrity-[dhgroup]_. If _dh-group_ is specified,
100 1 Martin Willi
     CHILD_SA setup and rekeying include a separate Diffe-Hellman exchange (IKEv2 only).
101 1 Martin Willi
102 23 Tobias Brunner
_forceencaps = yes | *no*_
103 31 Martin Willi
104 41 Tobias Brunner
p((.  force UDP encapsulation for ESP packets even if no NAT situation is detected.
105 1 Martin Willi
      This may help to surmount restrictive firewalls. In order to force the peer to
106 1 Martin Willi
      encapsulate packets, NAT detection payloads are faked (IKEv2 only). 
107 1 Martin Willi
108 23 Tobias Brunner
_ike = <cipher suites>_
109 31 Martin Willi
110 23 Tobias Brunner
p((. comma-separated list of IKE/ISAKMP SA encryption/authentication algorithms to be used, e.g.
111 21 Andreas Steffen
     _aes128-sha1-modp2048_. The notation is _encryption-integrity-dhgroup_. In IKEv2, multiple algorithms
112 21 Andreas Steffen
     and proposals may be included, such as _aes128-aes256-sha1-modp1536-modp2048,3des-sha1-md5-modp1024_.
113 20 Andreas Steffen
114 23 Tobias Brunner
_ikelifetime = *3h* | <time>_
115 31 Martin Willi
116 40 Tobias Brunner
p((. how long the keying channel of a connection (_ISAKMP or IKE SA_) should last before being renegotiated. Also see [[ExpiryRekey|Expiry and Rekey]].
117 1 Martin Willi
118 23 Tobias Brunner
_installpolicy = *yes* | no_
119 31 Martin Willi
120 23 Tobias Brunner
p((. decides whether IPsec policies are installed in the kernel by the IKEv2 charon daemon for a given connection.
121 21 Andreas Steffen
     Allows peaceful cooperation e.g. with the Mobile IPv6  _mip6d_ daemon who wants to control the kernel policies.
122 1 Martin Willi
123 23 Tobias Brunner
_keyexchange = *ike* | ikev1 | ikev2_
124 31 Martin Willi
125 23 Tobias Brunner
p((. method of key exchange; which protocol should be used to initialize the connection. Connections marked with
126 21 Andreas Steffen
     *ikev1*  are initiated with Pluto, those marked with *ikev2* with Charon. An incoming request from 
127 38 Andreas Steffen
     the remote peer is handled by the correct daemon, unaffected from the _keyexchange_ setting. Starting with
128 38 Andreas Steffen
     strongSwan 4.5 the default value *ike* is a synonym for *ikev2*, whereas in older strongSwan releases *ikev1*
129 38 Andreas Steffen
     was assumed.
130 20 Andreas Steffen
131 23 Tobias Brunner
_keyingtries = *%forever* | <number>_
132 31 Martin Willi
133 23 Tobias Brunner
p((. how  many attempts (a whole number or _%forever_) should be made to negotiate a connection, or a replacement
134 21 Andreas Steffen
     for one, before giving up. The value _%forever_ means 'never give up'.  Relevant  only  locally, other end need
135 1 Martin Willi
     not agree on it.
136 5 Martin Willi
137 26 Tobias Brunner
138 31 Martin Willi
139 26 Tobias Brunner
p((. synonym for _lifetime_.
140 26 Tobias Brunner
141 26 Tobias Brunner
_lifebytes = <number>_
142 31 Martin Willi
143 26 Tobias Brunner
p((. the number of bytes transmitted over an IPsec SA before it expires (IKEv2 only).
144 26 Tobias Brunner
145 26 Tobias Brunner
_lifepackets = <number>_
146 31 Martin Willi
147 26 Tobias Brunner
p((. the number of packets transmitted over an IPsec SA before it expires (IKEv2 only).
148 26 Tobias Brunner
149 26 Tobias Brunner
_lifetime = *1h* | <time>_
150 31 Martin Willi
151 1 Martin Willi
p((. how  long  a  particular  instance  of a connection (a set of encryption/authentication keys for user packets)
152 21 Andreas Steffen
     should last, from successful negotiation to expiry; acceptable values are an integer optionally followed by
153 1 Martin Willi
     _s_ (a time in seconds) or a decimal number followed by _m_, _h_, or _d_ (a time in minutes, hours,
154 21 Andreas Steffen
     or days respectively) (default _1h_, maximum _24h_).  Normally, the connection is renegotiated (via the
155 26 Tobias Brunner
     keying  channel) before it expires (see _margintime_).  The two ends need not exactly agree on _lifetime_, although if they
156 1 Martin Willi
     do not, there will be some clutter of superseded connections on the end which thinks the lifetime is longer.
157 40 Tobias Brunner
     Also see [[ExpiryRekey|Expiry and Rekey]].
158 1 Martin Willi
159 26 Tobias Brunner
_marginbytes = <number>_
160 31 Martin Willi
161 26 Tobias Brunner
p((. how many bytes before IPsec SA expiry (see _lifebytes_) should attempts to negotiate a replacement begin (IKEv2 only).
162 26 Tobias Brunner
163 26 Tobias Brunner
_marginpackets = <number>_
164 31 Martin Willi
165 26 Tobias Brunner
p((. how many packets before IPsec SA expiry (see _lifepackets_) should attempts to negotiate a replacement begin (IKEv2 only).
166 26 Tobias Brunner
167 26 Tobias Brunner
_margintime = *9m* | <time>_
168 1 Martin Willi
169 26 Tobias Brunner
p((. how long before connection expiry or keying-channel expiry should attempts to negotiate a replacement begin; acceptable values
170 40 Tobias Brunner
     as for _lifetime_ (default _9m_).  Relevant only locally, other end need not agree on it. Also see [[ExpiryRekey|Expiry and Rekey]].
171 26 Tobias Brunner
172 35 Andreas Steffen
_mark = <value>[/<mask>]_
173 35 Andreas Steffen
174 37 Tobias Brunner
p((. sets  an XFRM mark in the inbound and outbound IPsec SAs and policies. If the mask is missing then
175 35 Andreas Steffen
     a default mask of *0xffffffff* is assumed.
176 39 Gerd v. Egidy
     If using not the default mask make sure that the mark <value> given is the first <value> value valid 
177 39 Gerd v. Egidy
     in this mark (Bits which are zero in the <mask> must be zero in the <value> too).
178 35 Andreas Steffen
179 35 Andreas Steffen
_mark_in = <value>[/<mask>]_
180 35 Andreas Steffen
181 37 Tobias Brunner
p((. sets an XFRM mark in the inbound IPsec SA and policy. If the mask is missing then
182 35 Andreas Steffen
     a default mask of *0xffffffff* is assumed.
183 39 Gerd v. Egidy
     If using not the default mask make sure that the mark <value> given is the first <value> value valid 
184 39 Gerd v. Egidy
     in this mark (Bits which are zero in the <mask> must be zero in the <value> too).
185 35 Andreas Steffen
186 35 Andreas Steffen
_mark_out = <value>[/<mask>]_
187 35 Andreas Steffen
188 37 Tobias Brunner
p((. sets an XFRM mark in the outbound IPsec SA and policy. If the mask is missing then
189 35 Andreas Steffen
     a default mask of *0xffffffff* is assumed.
190 39 Gerd v. Egidy
     If using not the default mask make sure that the mark <value> given is the first <value> value valid 
191 39 Gerd v. Egidy
     in this mark (Bits which are zero in the <mask> must be zero in the <value> too).
192 35 Andreas Steffen
193 23 Tobias Brunner
_mobike = *yes* | no_
194 31 Martin Willi
195 23 Tobias Brunner
p((. enables the IKEv2 [[MobIke|MOBIKE]] protocol defined by RFC 4555. If set to *no*, the IKEv2 charon
196 21 Andreas Steffen
     daemon will not actively propose [[MobIke|MOBIKE]] but will still accept and support the mobility protocol
197 1 Martin Willi
     as a responder.
198 1 Martin Willi
199 23 Tobias Brunner
_modeconfig = push | *pull*_
200 31 Martin Willi
201 23 Tobias Brunner
p((. defines which mode is used to assign a virtual IP. Currently relevant for IKEv1 only since IKEv2 always uses
202 21 Andreas Steffen
     the configuration payload in *pull* mode. Cisco VPN gateways usually operate in *push* mode.
203 1 Martin Willi
204 21 Andreas Steffen
_pfs = *yes* | no_
205 31 Martin Willi
206 1 Martin Willi
p((. whether _Perfect Forward Secrecy_ of keys is desired on the connection's keying channel (with PFS,
207 1 Martin Willi
     penetration of the key-exchange protocol does not compromise keys negotiated earlier). IKEv2 always uses
208 23 Tobias Brunner
     PFS for IKE_SA rekeying whereas for CHILD_SA rekeying PFS is enforced by defining a Diffie-Hellman dhgroup
209 23 Tobias Brunner
     in the _esp_ parameter.
210 21 Andreas Steffen
211 20 Andreas Steffen
_pfsgroup = <modp group>_
212 31 Martin Willi
213 20 Andreas Steffen
p((. defines a Diffie-Hellman group for _perfect forward secrecy_ in IKEv1 Quick Mode differing from the DH group
214 23 Tobias Brunner
     used for IKEv1 Main Mode (IKEv1 pluto daemon only). 
215 23 Tobias Brunner
216 1 Martin Willi
_reauth = *yes* | no_
217 31 Martin Willi
218 1 Martin Willi
p((. whether rekeying of an IKE_SA should also reauthenticate the peer. In IKEv1, reauthentication is always done.
219 4 Martin Willi
     In  IKEv2, a value of *no* rekeys without uninstalling the IPsec SAs, a value of *yes* (the default)
220 23 Tobias Brunner
     creates a new IKE_SA from scratch and tries to recreate all IPsec SAs.
221 23 Tobias Brunner
222 1 Martin Willi
_rekey = *yes* | no_
223 31 Martin Willi
224 1 Martin Willi
p((. whether a connection should be renegotiated when it is about to expire. The two ends need not agree, but
225 1 Martin Willi
     while a value of no prevents Pluto/Charon from requesting renegotiation, it does not prevent responding
226 1 Martin Willi
     to renegotiation requested from the other end, so no will be largely ineffective unless both ends agree on it.
227 1 Martin Willi
228 1 Martin Willi
_rekeyfuzz = *100%* | <percentage>_
229 31 Martin Willi
230 26 Tobias Brunner
p((. maximum percentage by which _marginbytes_, _marginpackets_ and _margintime_ should be randomly increased to randomize
231 1 Martin Willi
     rekeying intervals (important for hosts with many connections); acceptable values are an integer, which may exceed 100,
232 26 Tobias Brunner
     followed  by  a '%' .
233 26 Tobias Brunner
     The value of _marginTYPE_, after this random increase, must not exceed _lifeTYPE_ (where TYPE is one of bytes, packets or type).
234 26 Tobias Brunner
     The value _0%_ will suppress randomization. Relevant only locally, other end need not agree on it.
235 40 Tobias Brunner
     Also see [[ExpiryRekey|Expiry and Rekey]].
236 16 Andreas Steffen
237 26 Tobias Brunner
238 31 Martin Willi
239 26 Tobias Brunner
p((.  synonym for _margintime_.
240 23 Tobias Brunner
241 41 Tobias Brunner
_reqid = <number>_
242 34 Tobias Brunner
243 34 Tobias Brunner
p((. sets the reqid for a given connection to a pre-configured fixed value (IKEv2 only).
244 34 Tobias Brunner
245 21 Andreas Steffen
_type = *tunnel* | transport | transport_proxy | passthrough | drop | reject_
246 31 Martin Willi
247 21 Andreas Steffen
p((. the type of the connection; currently the accepted values are *tunnel*, signifying a  host-to-host,
248 21 Andreas Steffen
     host-to-subnet, or subnet-to-subnet tunnel; *transport*, signifying host-to-host transport mode;
249 21 Andreas Steffen
     *transport_proxy*, signifying the special Mobile IPv6 transport proxy mode;
250 23 Tobias Brunner
     *passthrough*, signifying that no IPsec processing should be done at all; *drop*, signifying that packets
251 20 Andreas Steffen
     should be  discarded; and *reject*, signifying that packets should be discarded and a diagnostic ICMP
252 23 Tobias Brunner
     returned. Charon currently supports only *tunnel*, transport, and transport_proxy connection types.
253 23 Tobias Brunner
254 20 Andreas Steffen
_xauth = *client* | server_
255 31 Martin Willi
256 23 Tobias Brunner
p((. specifies the role in the XAUTH protocol if activated by _authby=xauthpsk_ or _authby=xauthrsasig_.
257 20 Andreas Steffen
258 23 Tobias Brunner
h2. left|right end parameters
259 23 Tobias Brunner
260 27 Daniel Mentz
Connection descriptions are defined in terms of a left endpoint and a right endpoint. For example, the
261 27 Daniel Mentz
two parameters leftid and rightid specify the identity of the left and the right endpoint. For every
262 27 Daniel Mentz
connection description an attempt is made to figure out whether the local endpoint should act as the left or
263 27 Daniel Mentz
the right endpoint. This is done by matching the IP addresses defined for both endpoints with the
264 27 Daniel Mentz
IP addresses assigned to local network interfaces. If a match is found then the role (left or right) that
265 27 Daniel Mentz
matches is going to be considered "local". If no match is found during startup, "left" is considered "local".
266 27 Daniel Mentz
267 1 Martin Willi
_left|right = <ip address> | <fqdn> | %defaultroute | %any_
268 31 Martin Willi
269 33 Tobias Brunner
p((. (required) the IP address of the participant's public-network interface or one of several magic values.
270 33 Tobias Brunner
     If it is _%%defaultroute_, the value will be filled in automatically with the local address of
271 33 Tobias Brunner
     the default-route interface (as determined at IPsec startup time and during configuration
272 33 Tobias Brunner
     update). Either left or right may be _%%defaultroute_, but not both. The prefix % in front of a
273 29 Daniel Mentz
     fully-qualified domain name or an IP address will implicitly set _leftallowany=yes_. If the domain name
274 29 Daniel Mentz
     cannot be resolved into an IP address at IPsec startup or update time then _left=%any_ and _leftallowany=no_
275 29 Daniel Mentz
     will be assumed.
276 1 Martin Willi
277 32 Daniel Mentz
p((. In case of an IKEv2 connection, the value _%any_ for the local endpoint signifies an address to be filled in
278 32 Daniel Mentz
     (by automatic keying) during negotiation. If the local peer initiates the connection setup the routing table
279 32 Daniel Mentz
     will be queried to determine the correct local IP address. In case the local peer is responding to a connection
280 33 Tobias Brunner
     setup then any IP address that is assigned to a local interface will be accepted. Note that specifying _%any_
281 33 Tobias Brunner
     for the local endpoint is not supported by the IKEv1 pluto daemon.
282 27 Daniel Mentz
283 33 Tobias Brunner
p((. If _%any_ is used for the remote endpoint it literally means any IP address.
284 27 Daniel Mentz
285 33 Tobias Brunner
p((. Please note that with the usage of wildcards multiple connection descriptions might match a given incoming
286 29 Daniel Mentz
     connection attempt. The most specific description is used in that case.
287 21 Andreas Steffen
288 21 Andreas Steffen
_left|rightallowany = yes | *no*_
289 31 Martin Willi
290 21 Andreas Steffen
p((. a modifier for _left|right_, making it behave as _%any_ although a concrete IP address has been
291 21 Andreas Steffen
     assigned. Recommended for dynamic IP addresses that can be resolved by DynDNS at IPsec startup or update time.
292 21 Andreas Steffen
293 7 Martin Willi
_left|rightauth = <auth method>_
294 31 Martin Willi
295 23 Tobias Brunner
p((. Authentication method to use locally (left) or require from the remote (right) side. This parameter is 
296 23 Tobias Brunner
     supported in IKEv2 only. Acceptable values are *pubkey* for public key encryption (RSA/ECDSA), *psk*
297 21 Andreas Steffen
     for pre-shared key authentication, and *eap* to [require the] use of the Extensible Authentication Protocol.
298 20 Andreas Steffen
     In the case of *eap*, an optional EAP method can be appended. Currently defined methods are *eap-aka*,
299 20 Andreas Steffen
     *eap-sim*, *eap-gtc*, *eap-md5*, and *eap-mschapv2*.  Alternatively, IANA assigned EAP method
300 7 Martin Willi
     numbers are accepted. Vendor specific EAP methods are defined in the form *eap-type-vendor* (e.g.
301 23 Tobias Brunner
302 23 Tobias Brunner
303 21 Andreas Steffen
_left|rightauth2 = <auth method>_
304 31 Martin Willi
305 1 Martin Willi
p((. Same as _left|rightauth_, but defines a second authentication exchange. IKEv2 supports multiple authentication
306 23 Tobias Brunner
     rounds using _Multiple Authentication Exchanges_ defined in "RFC 4739":
307 23 Tobias Brunner
     This allows e.g. a separate authentication of host and user (IKEv2 only).
308 1 Martin Willi
309 31 Martin Willi
310 23 Tobias Brunner
_left|rightca = <issuer dn> | %same_
311 23 Tobias Brunner
312 23 Tobias Brunner
p((. the distinguished name of a certificate authority which is required to lie in the trust path going from the
313 23 Tobias Brunner
     _left|right_ participant's certificate up to the root certification authority.
314 31 Martin Willi
315 21 Andreas Steffen
_left|rightca2 = <issuer dn> | %same_
316 1 Martin Willi
317 33 Tobias Brunner
p((. Same as _left|rightca_ but for the second authentication (IKev2 only).
318 7 Martin Willi
319 23 Tobias Brunner
_left|rightcert = <path>_
320 31 Martin Willi
321 23 Tobias Brunner
p((. the path to the left|right participant's X.509 certificate. The file can be coded either in PEM or DER format.
322 1 Martin Willi
     OpenPGP certificates are supported as well (IKEv1 only).  Both absolute paths or paths relative to
323 23 Tobias Brunner
     [[IpsecDirectoryCerts|/etc/ipsec.d/certs]] are accepted. By default _left|rightcert_ sets _left|rightid_
324 23 Tobias Brunner
     to the distinguished name of the certificate's subject and _left|rightca_ to the distinguished name of
325 21 Andreas Steffen
     the certificate's issuer. The _left|right_ participant's ID can be overridden by specifying a _left|rightid_
326 7 Martin Willi
     value which must be certified by the certificate, though.
327 21 Andreas Steffen
328 33 Tobias Brunner
_left|rightcert2 = <path>_
329 31 Martin Willi
330 1 Martin Willi
p((. Same as _left|rightcert_ but for the second authentication round (IKEv2 only).
331 23 Tobias Brunner
332 7 Martin Willi
_left|rightfirewall = yes | *no*_
333 31 Martin Willi
334 7 Martin Willi
p((. whether the _left|right_ participant is doing forwarding-firewalling (including  masquerading)
335 1 Martin Willi
     using iptables for traffic from _left|rightsubnet_, which should be turned off for traffic to the
336 21 Andreas Steffen
     other subnet) once the connection is established. May not be used in the same connection description with
337 20 Andreas Steffen
     _left|rightupdown_. Implemented as a parameter to the default _ipsec _updown_ script. Relevant only
338 23 Tobias Brunner
     locally, other end need not agree on it.
339 20 Andreas Steffen
340 20 Andreas Steffen
p((. If one or  both security gateways are doing forwarding firewalling (possibly including masquerading),
341 23 Tobias Brunner
     and this is specified using the firewall parameters, tunnels  established with  IPsec  are exempted from
342 23 Tobias Brunner
     it so that packets can flow unchanged through the tunnels. (This means that all subnets connected in this
343 7 Martin Willi
     manner must have distinct, non-overlapping subnet address blocks.)  This is done by the default 
344 23 Tobias Brunner
     _ipsec _updown_ script (see pluto(8)).
345 23 Tobias Brunner
346 1 Martin Willi
p((. In situations calling for more control, it may be preferable for the user to supply his own updown script,
347 7 Martin Willi
     which makes the appropriate adjustments for his system.
348 23 Tobias Brunner
349 23 Tobias Brunner
_left|rightgroups = <group list>_
350 31 Martin Willi
351 1 Martin Willi
p((. a comma-separated list of group names. If the _left|rightgroups_ parameter is present then the peer must
352 7 Martin Willi
     be a member of at least one of the groups defined by the parameter. Group membership must be certified by a
353 1 Martin Willi
     valid attribute certificate stored in [[IpsecDirectoryAcerts|/etc/ipsec.d/acerts]] that has been issued
354 7 Martin Willi
     to the peer by a trusted Authorization Authority stored in [[IpsecDirectoryAacerts|/etc/ipsec.d/aacerts]].
355 23 Tobias Brunner
     Attribute certificates are not supported in IKEv2 yet.
356 1 Martin Willi
357 12 Martin Willi
_left|righthostaccess = yes | *no*_
358 1 Martin Willi
359 1 Martin Willi
p((. inserts a pair of INPUT and OUTPUT iptables rules using the default _ipsec _updown_ script,
360 1 Martin Willi
     thus allowing access to the host itself in the case where the host's internal interface is part
361 1 Martin Willi
     of the negotiated client subnet. 
362 1 Martin Willi
363 1 Martin Willi
_left|rightid = <id>_
364 31 Martin Willi
365 1 Martin Willi
p((. how the _left|right_ participant should be identified for authentication; defaults to _left|right_.
366 33 Tobias Brunner
     Can be an IP address or a fully-qualified domain name preceded by @ (which is used as a literal string and not resolved).
367 23 Tobias Brunner
368 21 Andreas Steffen
_left|rightid2 = <id>_
369 8 Martin Willi
370 31 Martin Willi
p((. Identity to use for the second authentication of the left participant (IKEv2 only).
371 33 Tobias Brunner
     Defaults to _left|rightid_.
372 23 Tobias Brunner
373 33 Tobias Brunner
_leftikeport = <port>_
374 33 Tobias Brunner
375 33 Tobias Brunner
p((. UDP port the left participant uses for IKE communication. Currently supported in IKEv2 connections only.
376 33 Tobias Brunner
     If unspecified, port 500 is used with the port floating to 4500 if a NAT is detected or MOBIKE is enabled.
377 33 Tobias Brunner
     Specifying a local IKE port different from the default additionally requires a socket implementation that
378 33 Tobias Brunner
     listens to this port.
379 33 Tobias Brunner
380 7 Martin Willi
_left|rightnexthop = %direct | %defaultroute | <ip address> | <fqdn>_
381 23 Tobias Brunner
382 23 Tobias Brunner
p((. this parameter is usually not needed any more because the NETKEY IPsec stack does not require
383 21 Andreas Steffen
     explicit routing entries for the traffic to be tunneled. If _left|sourceip_ is used with IKEv1
384 1 Martin Willi
     then _left|rightnexthop_ must still be set in order for the source routes to work properly.
385 1 Martin Willi
386 23 Tobias Brunner
_left|rightprotoport = <protocol>/<port>_
387 31 Martin Willi
388 23 Tobias Brunner
p((. restrict the traffic selector to a single protocol and/or port. Examples: _leftprotoport=tcp/http_
389 1 Martin Willi
     or _leftprotoport=6/80_ or _rightprotoport=udp_
390 7 Martin Willi
391 23 Tobias Brunner
_left|rightrsasigkey = *%cert* | <raw rsa public key>_
392 31 Martin Willi
393 23 Tobias Brunner
p((. the left participant's public key for RSA signature authentication, in RFC 2537 format using ttodata(3)
394 1 Martin Willi
     encoding. The default value _%cert_ means that the key is extracted from a certificate.
395 1 Martin Willi
396 1 Martin Willi
_left|rightsendcert = never | no | *ifasked* | always | yes_
397 1 Martin Willi
398 1 Martin Willi
p((. Accepted values are *never* or *no*, *always* or *yes*, and *ifasked*, the latter meaning that 
399 1 Martin Willi
     the peer must send a certificate request (CR) payload in order to get a certificate in return.
400 1 Martin Willi
401 33 Tobias Brunner
_leftsourceip = %config | %cfg | %modeconfig | %modecfg | <ip address>_
402 7 Martin Willi
403 1 Martin Willi
p((. The internal source IP to use in a tunnel, also known as [[VirtualIp|virtual IP]].
404 31 Martin Willi
     If the value is one of the synonyms _%modeconfig, %modecfg, %config_, or _%cfg_, an address is
405 1 Martin Willi
     requested from the peer. In IKEv2, a statically defined address is also requested, since the server
406 23 Tobias Brunner
     may change it.
407 21 Andreas Steffen
408 1 Martin Willi
p((. If _leftsourceip=%config_ is set to request a [[VirtualIp|virtual IP]] from the peer then the
409 31 Martin Willi
     responder must define the address-to-be-assigned using a separate conn section with a _rightsourceip_
410 1 Martin Willi
     statement for each client.
411 33 Tobias Brunner
412 33 Tobias Brunner
_rightsourceip = %config | <network>/<netmask> | %poolname_
413 33 Tobias Brunner
414 33 Tobias Brunner
p((. The internal source IP to use in a tunnel for the remote peer. If the value is %config on the responder
415 33 Tobias Brunner
     side, the initiator must propose an address which is then echoed back. Also supported are address pools
416 33 Tobias Brunner
     expressed as _<network>/<netmask>_ or the use of an external IP address pool using _%%poolname_ where
417 33 Tobias Brunner
     _poolname_ is the name of the IP address pool used for the lookup (see [[VirtualIp|virtual IP]] for details). 
418 23 Tobias Brunner
419 23 Tobias Brunner
_left|rightsubnet = <ip subnet>_
420 31 Martin Willi
421 21 Andreas Steffen
p((. private subnet behind the left participant, expressed as network/netmask (actually, any form acceptable to
422 1 Martin Willi
     ttosubnet(3)); if omitted, essentially assumed to be left/32, signifying that the _left|right_ end of the
423 23 Tobias Brunner
     connection goes to the _left|right_ participant only. When using IKEv2, the configured subnet of the peers
424 23 Tobias Brunner
     may differ, the  protocol  narrows  it  to  the greatest common subnet. Further, IKEv2 supports multiple
425 21 Andreas Steffen
     subnets separated by commas. IKEv1 only interprets the first subnet of such a definition. 
426 21 Andreas Steffen
427 1 Martin Willi
_left|rightsubnetwithin = <ip subnet>_
428 31 Martin Willi
429 1 Martin Willi
p((. the  peer can propose any subnet or single IP address that fits within the range defined by
430 1 Martin Willi
     _left|rightsubnetwithin_.  Not relevant for IKEv2, as subnets are narrowed.
431 1 Martin Willi
432 1 Martin Willi
_left|rightupdown = <path>_
433 31 Martin Willi
434 1 Martin Willi
p((. what _updown_ script to run to adjust routing and/or firewalling when the status of the connection
435 1 Martin Willi
     changes (default _ipsec _updown_). Relevant only locally, other end need not agree on it.
436 1 Martin Willi
     IKEv2 uses the _updown_ script to insert firewall rules only, since routing has been implemented directly
437 1 Martin Willi
     into Charon.