ipsec.conf: conn Reference » History » Version 32

Daniel Mentz, 20.05.2010 11:43
left=%any not supported by pluto

1 21 Andreas Steffen
h1. conn <name>
2 1 Martin Willi
3 1 Martin Willi
4 23 Tobias Brunner
h2. general per connection parameters
5 21 Andreas Steffen
6 23 Tobias Brunner
_ah = <algorithms>_
7 31 Martin Willi
8 23 Tobias Brunner
p((. AH authentication algorithm to be used for the connection, e.g. _hmac-md5_.
9 21 Andreas Steffen
10 23 Tobias Brunner
_also = <section name>_
11 31 Martin Willi
12 23 Tobias Brunner
p((. includes conn section <name>.
13 1 Martin Willi
14 23 Tobias Brunner
_auth = *esp* | ah_
15 31 Martin Willi
16 23 Tobias Brunner
p((. whether authentication should be done as part of ESP encryption, or separately using the AH protocol.
17 1 Martin Willi
     The IKEv2 daemon currently supports ESP only.
18 1 Martin Willi
19 24 Andreas Steffen
_authby = *pubkey* | rsasig | ecdsasig | psk | secret | xauthrsasig | xauthpsk | eap | never_
20 31 Martin Willi
21 1 Martin Willi
p((. how the two security gateways should authenticate each other; acceptable values are *secret* or *psk*
22 25 Andreas Steffen
     for pre-shared secrets, *pubkey* for public key signatures as well as the synonyms *rsasig* for RSA digital
23 24 Andreas Steffen
     signatures and *ecdsasig* for Elliptic Curve DSA signatures. *never*  can be used if  negotiation is  never
24 24 Andreas Steffen
     to be attempted or accepted (useful for shunt-only conns). Digital signatures are superior in every way to
25 24 Andreas Steffen
     shared secrets. In IKEv2, the two ends must not agree on this parameter, it is relevant for the out-bound 
26 21 Andreas Steffen
     authentication  method only. IKEv1 additionally supports the values *xauthpsk* and *xauthrsasig* that
27 21 Andreas Steffen
     will enable _eXtended AUTHentication (XAUTH)_ in addition to IKEv1 main mode based on shared secrets
28 21 Andreas Steffen
     or digital RSA signatures,  respectively. IKEv2 additionally supports the value *eap*, which indicates
29 21 Andreas Steffen
     an initiator to request EAP authentication. The EAP method to use is selected by the server (see _eap_).
30 20 Andreas Steffen
     This parameter is deprecated for IKEv2 connections, as two peers do ot need to agree on an authentication
31 21 Andreas Steffen
     method. Use the _left|rightauth_ parameter to define authentication methods in IKEv2.
32 20 Andreas Steffen
33 23 Tobias Brunner
_auto = *ignore* | add | route | start_
34 31 Martin Willi
35 23 Tobias Brunner
p((. what operation, if any, should be done automatically at IPsec startup. *add* loads a connection without
36 21 Andreas Steffen
     starting it. *route* loads a connection and installs kernel traps. If traffic is detected between
37 21 Andreas Steffen
     _leftsubnet_ and _rightsubnet_, a connection is established. *start* loads a connection and brings
38 21 Andreas Steffen
     it up immediatly. *ignore* ignores the connection. This is equal to delete a connection from the config
39 1 Martin Willi
     file. Relevant only locally, other end need not agree on it (but in general, for an intended-to-be-permanent
40 23 Tobias Brunner
     connection, both ends should use _auto = *start*_ to ensure that any reboot causes immediate renegotiation).
41 1 Martin Willi
42 23 Tobias Brunner
_compress = yes | *no*_
43 31 Martin Willi
44 23 Tobias Brunner
p((. whether IPComp compression of content is proposed on the connection (link-level compression does not work on
45 21 Andreas Steffen
     encrypted data, so to be effective, compression must be done before encryption). A value of *yes* causes IPsec
46 4 Martin Willi
     to propose both compressed and  uncompressed, and  prefer compressed. A value of no prevents IPsec from proposing
47 1 Martin Willi
     compression; a proposal to compress will still be accepted. IKEv2 does not support IP compression yet.
48 1 Martin Willi
49 23 Tobias Brunner
_dpdaction = *none* | clear | hold | restart_
50 31 Martin Willi
51 23 Tobias Brunner
p((. controls the use of the Dead Peer Detection protocol (DPD, RFC 3706) where R_U_THERE notification messages
52 1 Martin Willi
     (IKEv1) or empty INFORMATIONAL messages (IKEv2) are periodically sent in order to check the liveliness of the
53 21 Andreas Steffen
     IPsec peer. The values *clear*, *hold*, and *restart* all activate DPD. If no activity is detected,
54 21 Andreas Steffen
     all  connections with a dead peer are stopped and unrouted (*clear*), put in the hold state (*hold*)
55 21 Andreas Steffen
     or restarted (*restart*). For IKEv1, the default is *none* which disables the active sending of
56 1 Martin Willi
     R_U_THERE  notifications. Nevertheless Pluto will always send the DPD Vendor ID during connection set up
57 1 Martin Willi
     in order to signal the readiness to act passively as a responder if the peer wants to use DPD. For IKEv2,
58 21 Andreas Steffen
     *none* does't make sense, since all messages are used to detect dead peers. If specified, it has the
59 21 Andreas Steffen
     same meaning as the default (*clear*).
60 1 Martin Willi
61 23 Tobias Brunner
_dpddelay = <time>_
62 31 Martin Willi
63 23 Tobias Brunner
p((. defines  the  period time interval with which R_U_THERE messages/INFORMATIONAL exchanges are sent to the peer.
64 1 Martin Willi
     These are only sent if no other traffic is received. In IKEv2, a value of 0 sends no additional INFORMATIONAL
65 1 Martin Willi
     messages and uses only standard messages (such as those to rekey) to detect dead peers.
66 1 Martin Willi
67 23 Tobias Brunner
_dpdtimeout = <time>_
68 31 Martin Willi
69 23 Tobias Brunner
p((. defines the timeout interval, after which all connections to a peer are deleted in case of inactivity.
70 1 Martin Willi
     This only applies to IKEv1, in IKEv2 the default retransmission timeout applies, as every exchange is used to
71 1 Martin Willi
     detect dead peers.
72 20 Andreas Steffen
73 30 Martin Willi
_inactivity = <time>_
74 31 Martin Willi
75 30 Martin Willi
p((. defines the timeout interval, after which a CHILD_SA is closed if it did not send or receive any traffic.
76 30 Martin Willi
     Currently supported in IKEv2 connections only.
77 30 Martin Willi
78 23 Tobias Brunner
_eap = aka | gtc | md5 | mschapv2 | radius | sim | <type> | <type>-<vendor>_
79 31 Martin Willi
80 23 Tobias Brunner
p((. defines the EAP type to be used if _authby=eap_ is selected. Currently supported values are *aka*
81 21 Andreas Steffen
     for EAP-AKA, *gtc* for EAP-GTC, *md5* for EAP-MD5, *mschapv2* for EAP-MS-CHAPv2, *radius* for the
82 21 Andreas Steffen
     EAP-RADIUS proxy  and *sim* for EAP-SIM.
83 21 Andreas Steffen
     Additionally, IANA assigned EAP method numbers are accepted, or a definition in the form *eap=type-vendor*
84 1 Martin Willi
     (e.g. eap=7-12345 ) can be used to specify vendor specific EAP types. For IKEv2 this parameter is deprecated
85 21 Andreas Steffen
     in favour of _left|rightauth_.
86 5 Martin Willi
87 23 Tobias Brunner
_eap_identity = <id>_
88 31 Martin Willi
89 23 Tobias Brunner
p((. defines the identity the client uses to reply to an EAP Identity request. If defined on the EAP server, the defined
90 21 Andreas Steffen
     identity  will be used as peer identity during EAP authentication. The special value _%identity_ uses the EAP Identity method
91 14 Martin Willi
     to ask the client for a EAP identity. If not defined, the IKEv2 identity will be used as EAP identity.
92 1 Martin Willi
93 23 Tobias Brunner
_esp = <cipher suites>_
94 31 Martin Willi
95 23 Tobias Brunner
p((. comma-separated list of ESP encryption/authentication algorithms to be used for the connection, e.g.
96 21 Andreas Steffen
     _3des-md5_. The notation is _encryption-integrity-[dhgroup]_. If _dh-group_ is specified,
97 1 Martin Willi
     CHILD_SA setup and rekeying include a separate Diffe-Hellman exchange (IKEv2 only).
98 1 Martin Willi
99 23 Tobias Brunner
_forceencaps = yes | *no*_
100 31 Martin Willi
101 23 Tobias Brunner
p((.  Force UDP encapsulation for ESP packets even if no NAT situation is detected.
102 1 Martin Willi
      This may help to surmount restrictive firewalls. In order to force the peer to
103 1 Martin Willi
      encapsulate packets, NAT detection payloads are faked (IKEv2 only). 
104 1 Martin Willi
105 23 Tobias Brunner
_ike = <cipher suites>_
106 31 Martin Willi
107 23 Tobias Brunner
p((. comma-separated list of IKE/ISAKMP SA encryption/authentication algorithms to be used, e.g.
108 21 Andreas Steffen
     _aes128-sha1-modp2048_. The notation is _encryption-integrity-dhgroup_. In IKEv2, multiple algorithms
109 21 Andreas Steffen
     and proposals may be included, such as _aes128-aes256-sha1-modp1536-modp2048,3des-sha1-md5-modp1024_.
110 20 Andreas Steffen
111 23 Tobias Brunner
_ikelifetime = *3h* | <time>_
112 31 Martin Willi
113 23 Tobias Brunner
p((. how long the keying channel of a connection (_ISAKMP or IKE SA_) should last before being renegotiated.
114 1 Martin Willi
115 23 Tobias Brunner
_installpolicy = *yes* | no_
116 31 Martin Willi
117 23 Tobias Brunner
p((. decides whether IPsec policies are installed in the kernel by the IKEv2 charon daemon for a given connection.
118 21 Andreas Steffen
     Allows peaceful cooperation e.g. with the Mobile IPv6  _mip6d_ daemon who wants to control the kernel policies.
119 1 Martin Willi
120 23 Tobias Brunner
_keyexchange = *ike* | ikev1 | ikev2_
121 31 Martin Willi
122 23 Tobias Brunner
p((. method of key exchange; which protocol should be used to initialize the connection. Connections marked with
123 21 Andreas Steffen
     *ikev1*  are initiated with Pluto, those marked with *ikev2* with Charon. An incoming request from 
124 21 Andreas Steffen
     the remote peer is handled by the correct daemon, unaffected from the _keyexchange_ setting. The default 
125 21 Andreas Steffen
     value *ike* currently is a synonym for *ikev1*.
126 20 Andreas Steffen
127 23 Tobias Brunner
_keyingtries = *%forever* | <number>_
128 31 Martin Willi
129 23 Tobias Brunner
p((. how  many attempts (a whole number or _%forever_) should be made to negotiate a connection, or a replacement
130 21 Andreas Steffen
     for one, before giving up. The value _%forever_ means 'never give up'.  Relevant  only  locally, other end need
131 1 Martin Willi
     not agree on it.
132 5 Martin Willi
133 26 Tobias Brunner
134 31 Martin Willi
135 26 Tobias Brunner
p((. synonym for _lifetime_.
136 26 Tobias Brunner
137 26 Tobias Brunner
_lifebytes = <number>_
138 31 Martin Willi
139 26 Tobias Brunner
p((. the number of bytes transmitted over an IPsec SA before it expires (IKEv2 only).
140 26 Tobias Brunner
141 26 Tobias Brunner
_lifepackets = <number>_
142 31 Martin Willi
143 26 Tobias Brunner
p((. the number of packets transmitted over an IPsec SA before it expires (IKEv2 only).
144 26 Tobias Brunner
145 26 Tobias Brunner
_lifetime = *1h* | <time>_
146 31 Martin Willi
147 1 Martin Willi
p((. how  long  a  particular  instance  of a connection (a set of encryption/authentication keys for user packets)
148 21 Andreas Steffen
     should last, from successful negotiation to expiry; acceptable values are an integer optionally followed by
149 1 Martin Willi
     _s_ (a time in seconds) or a decimal number followed by _m_, _h_, or _d_ (a time in minutes, hours,
150 21 Andreas Steffen
     or days respectively) (default _1h_, maximum _24h_).  Normally, the connection is renegotiated (via the
151 26 Tobias Brunner
     keying  channel) before it expires (see _margintime_).  The two ends need not exactly agree on _lifetime_, although if they
152 1 Martin Willi
     do not, there will be some clutter of superseded connections on the end which thinks the lifetime is longer.
153 1 Martin Willi
154 26 Tobias Brunner
_marginbytes = <number>_
155 31 Martin Willi
156 26 Tobias Brunner
p((. how many bytes before IPsec SA expiry (see _lifebytes_) should attempts to negotiate a replacement begin (IKEv2 only).
157 26 Tobias Brunner
158 26 Tobias Brunner
_marginpackets = <number>_
159 31 Martin Willi
160 26 Tobias Brunner
p((. how many packets before IPsec SA expiry (see _lifepackets_) should attempts to negotiate a replacement begin (IKEv2 only).
161 26 Tobias Brunner
162 26 Tobias Brunner
_margintime = *9m* | <time>_
163 31 Martin Willi
164 26 Tobias Brunner
p((. how long before connection expiry or keying-channel expiry should attempts to negotiate a replacement begin; acceptable values
165 26 Tobias Brunner
     as for _lifetime_ (default _9m_).  Relevant only locally, other end need not agree on it.
166 26 Tobias Brunner
167 23 Tobias Brunner
_mobike = *yes* | no_
168 31 Martin Willi
169 23 Tobias Brunner
p((. enables the IKEv2 [[MobIke|MOBIKE]] protocol defined by RFC 4555. If set to *no*, the IKEv2 charon
170 21 Andreas Steffen
     daemon will not actively propose [[MobIke|MOBIKE]] but will still accept and support the mobility protocol
171 1 Martin Willi
     as a responder.
172 1 Martin Willi
173 23 Tobias Brunner
_modeconfig = push | *pull*_
174 31 Martin Willi
175 23 Tobias Brunner
p((. defines which mode is used to assign a virtual IP. Currently relevant for IKEv1 only since IKEv2 always uses
176 21 Andreas Steffen
     the configuration payload in *pull* mode. Cisco VPN gateways usually operate in *push* mode.
177 1 Martin Willi
178 21 Andreas Steffen
_pfs = *yes* | no_
179 31 Martin Willi
180 1 Martin Willi
p((. whether _Perfect Forward Secrecy_ of keys is desired on the connection's keying channel (with PFS,
181 1 Martin Willi
     penetration of the key-exchange protocol does not compromise keys negotiated earlier). IKEv2 always uses
182 23 Tobias Brunner
     PFS for IKE_SA rekeying whereas for CHILD_SA rekeying PFS is enforced by defining a Diffie-Hellman dhgroup
183 23 Tobias Brunner
     in the _esp_ parameter.
184 21 Andreas Steffen
185 20 Andreas Steffen
_pfsgroup = <modp group>_
186 31 Martin Willi
187 20 Andreas Steffen
p((. defines a Diffie-Hellman group for _perfect forward secrecy_ in IKEv1 Quick Mode differing from the DH group
188 23 Tobias Brunner
     used for IKEv1 Main Mode (IKEv1 pluto daemon only). 
189 23 Tobias Brunner
190 1 Martin Willi
_reauth = *yes* | no_
191 31 Martin Willi
192 1 Martin Willi
p((. whether rekeying of an IKE_SA should also reauthenticate the peer. In IKEv1, reauthentication is always done.
193 4 Martin Willi
     In  IKEv2, a value of *no* rekeys without uninstalling the IPsec SAs, a value of *yes* (the default)
194 23 Tobias Brunner
     creates a new IKE_SA from scratch and tries to recreate all IPsec SAs.
195 23 Tobias Brunner
196 1 Martin Willi
_rekey = *yes* | no_
197 31 Martin Willi
198 1 Martin Willi
p((. whether a connection should be renegotiated when it is about to expire. The two ends need not agree, but
199 1 Martin Willi
     while a value of no prevents Pluto/Charon from requesting renegotiation, it does not prevent responding
200 1 Martin Willi
     to renegotiation requested from the other end, so no will be largely ineffective unless both ends agree on it.
201 1 Martin Willi
202 1 Martin Willi
_rekeyfuzz = *100%* | <percentage>_
203 31 Martin Willi
204 26 Tobias Brunner
p((. maximum percentage by which _marginbytes_, _marginpackets_ and _margintime_ should be randomly increased to randomize
205 26 Tobias Brunner
     rekeying intervals (important for hosts with many connections); acceptable values are an integer, which may exceed 100,
206 26 Tobias Brunner
     followed  by  a '%' .
207 26 Tobias Brunner
     The value of _marginTYPE_, after this random increase, must not exceed _lifeTYPE_ (where TYPE is one of bytes, packets or type).
208 26 Tobias Brunner
     The value _0%_ will suppress randomization. Relevant only locally, other end need not agree on it.
209 16 Andreas Steffen
210 26 Tobias Brunner
211 31 Martin Willi
212 26 Tobias Brunner
p((.  synonym for _margintime_.
213 23 Tobias Brunner
214 21 Andreas Steffen
_type = *tunnel* | transport | transport_proxy | passthrough | drop | reject_
215 31 Martin Willi
216 21 Andreas Steffen
p((. the type of the connection; currently the accepted values are *tunnel*, signifying a  host-to-host,
217 21 Andreas Steffen
     host-to-subnet, or subnet-to-subnet tunnel; *transport*, signifying host-to-host transport mode;
218 21 Andreas Steffen
     *transport_proxy*, signifying the special Mobile IPv6 transport proxy mode;
219 23 Tobias Brunner
     *passthrough*, signifying that no IPsec processing should be done at all; *drop*, signifying that packets
220 20 Andreas Steffen
     should be  discarded; and *reject*, signifying that packets should be discarded and a diagnostic ICMP
221 23 Tobias Brunner
     returned. Charon currently supports only *tunnel*, transport, and transport_proxy connection types.
222 23 Tobias Brunner
223 20 Andreas Steffen
_xauth = *client* | server_
224 31 Martin Willi
225 23 Tobias Brunner
p((. specifies the role in the XAUTH protocol if activated by _authby=xauthpsk_ or _authby=xauthrsasig_.
226 20 Andreas Steffen
227 23 Tobias Brunner
h2. left|right end parameters
228 23 Tobias Brunner
229 27 Daniel Mentz
Connection descriptions are defined in terms of a left endpoint and a right endpoint. For example, the
230 27 Daniel Mentz
two parameters leftid and rightid specify the identity of the left and the right endpoint. For every
231 27 Daniel Mentz
connection description an attempt is made to figure out whether the local endpoint should act as the left or
232 27 Daniel Mentz
the right endpoint. This is done by matching the IP addresses defined for both endpoints with the
233 27 Daniel Mentz
IP addresses assigned to local network interfaces. If a match is found then the role (left or right) that
234 27 Daniel Mentz
matches is going to be considered "local". If no match is found during startup, "left" is considered "local".
235 27 Daniel Mentz
236 1 Martin Willi
_left|right = <ip address> | <fqdn> | %defaultroute | %any_
237 31 Martin Willi
238 29 Daniel Mentz
p((. (required) the IP address of the participant's public-network interface, in any form accepted by ttoaddr(3)
239 32 Daniel Mentz
     or one of several magic values. If it is _%%defaultroute_, the value will be filled in automatically with the
240 29 Daniel Mentz
     local address of the default-route interface (as determined at IPsec startup time and during configuration
241 29 Daniel Mentz
     update). Either left or right may be _%%defaultroute_, but not both. The prefix _%%_ in front of a
242 29 Daniel Mentz
     fully-qualified domain name or an IP address will implicitly set _leftallowany=yes_. If the domain name
243 29 Daniel Mentz
     cannot be resolved into an IP address at IPsec startup or update time then _left=%any_ and _leftallowany=no_
244 29 Daniel Mentz
     will be assumed.
245 1 Martin Willi
246 32 Daniel Mentz
p((. In case of an IKEv2 connection, the value _%any_ for the local endpoint signifies an address to be filled in
247 32 Daniel Mentz
     (by automatic keying) during negotiation. If the local peer initiates the connection setup the routing table
248 32 Daniel Mentz
     will be queried to determine the correct local IP address. In case the local peer is responding to a connection
249 32 Daniel Mentz
     setup then any IP address that is assigned to a local interface will be accepted. Note that _%any_ is not supported
250 32 Daniel Mentz
     by the IKEv1 pluto daemon.
251 27 Daniel Mentz
252 27 Daniel Mentz
p((. If _%any_ is used for the remote end it literally means any IP address.
253 27 Daniel Mentz
254 29 Daniel Mentz
p((. Please note that with the usage of wild cards multiple connection descriptions might match a given incoming
255 29 Daniel Mentz
     connection attempt. The most specific description is used in that case.
256 21 Andreas Steffen
257 21 Andreas Steffen
_left|rightallowany = yes | *no*_
258 31 Martin Willi
259 21 Andreas Steffen
p((. a modifier for _left|right_, making it behave as _%any_ although a concrete IP address has been
260 21 Andreas Steffen
     assigned. Recommended for dynamic IP addresses that can be resolved by DynDNS at IPsec startup or update time.
261 21 Andreas Steffen
262 7 Martin Willi
_left|rightauth = <auth method>_
263 31 Martin Willi
264 23 Tobias Brunner
p((. Authentication method to use locally (left) or require from the remote (right) side. This parameter is 
265 23 Tobias Brunner
     supported in IKEv2 only. Acceptable values are *pubkey* for public key encryption (RSA/ECDSA), *psk*
266 21 Andreas Steffen
     for pre-shared key authentication, and *eap* to [require the] use of the Extensible Authentication Protocol.
267 20 Andreas Steffen
     In the case of *eap*, an optional EAP method can be appended. Currently defined methods are *eap-aka*,
268 20 Andreas Steffen
     *eap-sim*, *eap-gtc*, *eap-md5*, and *eap-mschapv2*.  Alternatively, IANA assigned EAP method
269 7 Martin Willi
     numbers are accepted. Vendor specific EAP methods are defined in the form *eap-type-vendor* (e.g.
270 23 Tobias Brunner
271 23 Tobias Brunner
272 21 Andreas Steffen
_left|rightauth2 = <auth method>_
273 31 Martin Willi
274 1 Martin Willi
p((. Same as _left|rightauth_, but defines a second authentication exchange. IKEv2 supports multiple authentication
275 23 Tobias Brunner
     rounds using _Multiple Authentication Exchanges_ defined in "RFC 4739":
276 23 Tobias Brunner
     This allows e.g. a separate authentication of host and user (IKEv2 only).
277 21 Andreas Steffen
278 7 Martin Willi
279 1 Martin Willi
_left|rightca = <issuer dn> | %same_
280 31 Martin Willi
281 23 Tobias Brunner
p((. the distinguished name of a certificate authority which is required to lie in the trust path going from the
282 23 Tobias Brunner
     _left|right_ participant's certificate up to the root certification authority.
283 23 Tobias Brunner
284 23 Tobias Brunner
_left|rightca2 = <issuer dn> | %same_
285 31 Martin Willi
286 21 Andreas Steffen
p((. Same as _left|rightca_ but defines an additional authentication exchange. IKEv2 supports multiple 
287 21 Andreas Steffen
     authentication rounds using _Multiple Authentication Exchanges' defined in "RFC 4739":
288 7 Martin Willi
     This allows e.g. separate authentication of host and user (IKev2 only).
289 7 Martin Willi
290 23 Tobias Brunner
_left|rightcert = <path>_
291 31 Martin Willi
292 23 Tobias Brunner
p((. the path to the left|right participant's X.509 certificate. The file can be coded either in PEM or DER format.
293 1 Martin Willi
     OpenPGP certificates are supported as well (IKEv1 only).  Both absolute paths or paths relative to
294 23 Tobias Brunner
     [[IpsecDirectoryCerts|/etc/ipsec.d/certs]] are accepted. By default _left|rightcert_ sets _left|rightid_
295 23 Tobias Brunner
     to the distinguished name of the certificate's subject and _left|rightca_ to the distinguished name of
296 21 Andreas Steffen
     the certificate's issuer. The _left|right_ participant's ID can be overridden by specifying a _left|rightid_
297 7 Martin Willi
     value which must be certified by the certificate, though.
298 21 Andreas Steffen
299 1 Martin Willi
_left|rightcert2 = _<path>
300 31 Martin Willi
301 1 Martin Willi
p((. Same as _left|rightcert_ but for the second authentication round (IKEv2 only).
302 23 Tobias Brunner
303 7 Martin Willi
_left|rightfirewall = yes | *no*_
304 31 Martin Willi
305 7 Martin Willi
p((. whether the _left|right_ participant is doing forwarding-firewalling (including  masquerading)
306 1 Martin Willi
     using iptables for traffic from _left|rightsubnet_, which should be turned off for traffic to the
307 21 Andreas Steffen
     other subnet) once the connection is established. May not be used in the same connection description with
308 20 Andreas Steffen
     _left|rightupdown_. Implemented as a parameter to the default _ipsec _updown_ script. Relevant only
309 23 Tobias Brunner
     locally, other end need not agree on it.
310 20 Andreas Steffen
311 20 Andreas Steffen
p((. If one or  both security gateways are doing forwarding firewalling (possibly including masquerading),
312 23 Tobias Brunner
     and this is specified using the firewall parameters, tunnels  established with  IPsec  are exempted from
313 23 Tobias Brunner
     it so that packets can flow unchanged through the tunnels. (This means that all subnets connected in this
314 7 Martin Willi
     manner must have distinct, non-overlapping subnet address blocks.)  This is done by the default 
315 23 Tobias Brunner
     _ipsec _updown_ script (see pluto(8)).
316 23 Tobias Brunner
317 1 Martin Willi
p((. In situations calling for more control, it may be preferable for the user to supply his own updown script,
318 7 Martin Willi
     which makes the appropriate adjustments for his system.
319 23 Tobias Brunner
320 23 Tobias Brunner
_left|rightgroups = <group list>_
321 31 Martin Willi
322 1 Martin Willi
p((. a comma-separated list of group names. If the _left|rightgroups_ parameter is present then the peer must
323 7 Martin Willi
     be a member of at least one of the groups defined by the parameter. Group membership must be certified by a
324 7 Martin Willi
     valid attribute certificate stored in [[IpsecDirectoryAcerts|/etc/ipsec.d/acerts]] that has been issued
325 23 Tobias Brunner
     to the peer by a trusted Authorization Authority stored in [[IpsecDirectoryAacerts|/etc/ipsec.d/aacerts]].
326 23 Tobias Brunner
     Attribute certificates are not supported in IKEv2 yet.
327 23 Tobias Brunner
328 12 Martin Willi
_left|righthostaccess = yes | *no*_
329 31 Martin Willi
330 1 Martin Willi
p((. inserts a pair of INPUT and OUTPUT iptables rules using the default _ipsec _updown_ script,
331 23 Tobias Brunner
     thus allowing access to the host itself in the case where the host's internal interface is part
332 23 Tobias Brunner
     of the negotiated client subnet. 
333 21 Andreas Steffen
334 8 Martin Willi
_left|rightid = <id>_
335 31 Martin Willi
336 23 Tobias Brunner
p((. how the _left|right_ participant should be identified for authentication; defaults to _left|right_.
337 23 Tobias Brunner
     Can be an IP address (in any ttoaddr(3) syntax) or a fully-qualified domain name preceded by @
338 21 Andreas Steffen
     (which is used as a literal string and not resolved).
339 21 Andreas Steffen
340 8 Martin Willi
_left|rightid2 = <id>_
341 31 Martin Willi
342 23 Tobias Brunner
p((. Identity to use for the second authentication of the left participant (IKEv2 only).
343 23 Tobias Brunner
     Defaults to _left|rightid_. 
344 21 Andreas Steffen
345 7 Martin Willi
_left|rightnexthop = %direct | %defaultroute | <ip address> | <fqdn>_
346 31 Martin Willi
347 23 Tobias Brunner
p((. this parameter is usually not needed any more because the NETKEY IPsec stack does not require
348 23 Tobias Brunner
     explicit routing entries for the traffic to be tunneled. If _left|sourceip_ is used with IKEv1
349 21 Andreas Steffen
     then _left|rightnexthop_ must still be set in order for the source routes to work properly.
350 1 Martin Willi
351 23 Tobias Brunner
_left|rightprotoport = <protocol>/<port>_
352 31 Martin Willi
353 23 Tobias Brunner
p((. restrict the traffic selector to a single protocol and/or port. Examples: _leftprotoport=tcp/http_
354 1 Martin Willi
     or _leftprotoport=6/80_ or _rightprotoport=udp_
355 7 Martin Willi
356 23 Tobias Brunner
_left|rightrsasigkey = *%cert* | <raw rsa public key>_
357 31 Martin Willi
358 23 Tobias Brunner
p((. the left participant's public key for RSA signature authentication, in RFC 2537 format using ttodata(3)
359 21 Andreas Steffen
     encoding. The default value _%cert_ means that the key is extracted from a certificate.
360 7 Martin Willi
361 1 Martin Willi
_left|rightsendcert = never | no | *ifasked* | always | yes_
362 31 Martin Willi
363 1 Martin Willi
p((. Accepted values are *never* or *no*, *always* or *yes*, and *ifasked*, the latter meaning that 
364 23 Tobias Brunner
     the peer must send a certificate request (CR) payload in order to get a certificate in return.
365 21 Andreas Steffen
366 1 Martin Willi
_left|rightsourceip = %config | %cfg | %modeconfig | %modecfg | <ip address>_
367 31 Martin Willi
368 1 Martin Willi
p((. The internal source IP to use in a tunnel, also known as [[VirtualIp|virtual IP]].
369 23 Tobias Brunner
     If the value is one of the synonyms _%modeconfig, %modecfg, %config_, or _%cfg_, an address is
370 23 Tobias Brunner
     requested from the peer. In IKEv2, a statically defined address is also requested, since the server
371 21 Andreas Steffen
     may change it.
372 1 Martin Willi
373 23 Tobias Brunner
p((. If _leftsourceip=%config_ is set to request a [[VirtualIp|virtual IP]] from the peer then the
374 22 Martin Willi
     responder must define the address-to-be-assigned using a separate conn section with a _rightsourceip_
375 1 Martin Willi
     statement for each client.
376 23 Tobias Brunner
377 23 Tobias Brunner
_left|rightsubnet = <ip subnet>_
378 31 Martin Willi
379 21 Andreas Steffen
p((. private subnet behind the left participant, expressed as network/netmask (actually, any form acceptable to
380 1 Martin Willi
     ttosubnet(3)); if omitted, essentially assumed to be left/32, signifying that the _left|right_ end of the
381 23 Tobias Brunner
     connection goes to the _left|right_ participant only. When using IKEv2, the configured subnet of the peers
382 23 Tobias Brunner
     may differ, the  protocol  narrows  it  to  the greatest common subnet. Further, IKEv2 supports multiple
383 21 Andreas Steffen
     subnets separated by commas. IKEv1 only interprets the first subnet of such a definition. 
384 21 Andreas Steffen
385 1 Martin Willi
_left|rightsubnetwithin = <ip subnet>_
386 31 Martin Willi
387 1 Martin Willi
p((. the  peer can propose any subnet or single IP address that fits within the range defined by
388 1 Martin Willi
     _left|rightsubnetwithin_.  Not relevant for IKEv2, as subnets are narrowed.
389 1 Martin Willi
390 1 Martin Willi
_left|rightupdown = <path>_
391 31 Martin Willi
392 1 Martin Willi
p((. what _updown_ script to run to adjust routing and/or firewalling when the status of the connection
393 1 Martin Willi
     changes (default _ipsec _updown_). Relevant only locally, other end need not agree on it.
394 1 Martin Willi
     IKEv2 uses the _updown_ script to insert firewall rules only, since routing has been implemented directly
395 1 Martin Willi
     into Charon.