strongSwan on Android » History » Version 8

« Previous - Version 8/18 (diff) - Next » - Current version
Tobias Brunner, 15.08.2012 14:14
App documented, some other updates (several links were dead)

strongSwan on Android

strongSwan VPN Client for Android 4+

We recently released a free App for Android 4 and newer which can be downloaded directly from Google Play.

There are some limitations at the moment:

  • Only IKEv2 is supported
  • User authentication is limited to EAP authentication based on username/password (EAP-MSCHAPv2, EAP-MD5)
  • No support for MOBIKE yet
  • The IPsec implementation is also limited (only AES and SHA1/SHA2 are supported)

Native build

strongSwan can also be built for inclusion in the Android system image, that is, directly within the Android source tree. The rest of this document describes how to do so.

A while ago we also created a patch that integrates strongSwan into the default Android 2.2 VPN frontend.

Android Source Tree

You will need the complete Android source tree to build strongSwan. Instructions on how to download and build it can be found on the Android website.

To checkout a specific branch or tag of the sources, specify it with the -b parameter when using the repo init command.

Since building the whole source tree takes quite a while you should probably start with this first (use -j to speed this up on multi-core machines):

cd /path/to/android/source
. build/
lunch 1
make -j<jobs>

Android Kernel

The prebuilt kernel that is used for the emulator lacks some modules required for strongSwan to work correctly. It is therefore required to build a custom kernel.
To get the current kernel config you can use the Android Debug Bridge to download it from the running emulator. After starting the emulator use

adb pull /proc/config.gz config.gz
to copy the config to the current directory. Then enable the missing modules, this is mainly CONFIG_XFRM_USER and CONFIG_INET_XFRM_MODE_TUNNEL but might include other modules.
Please compare your config to the list of required modules in this wiki (please note that some modules, especially all the IPv6 related modules, are not really required).

Clone the kernel sources and check out an appropriate tag (check the version of the kernel in the emulator). For example (this is for Android 2.2):

git clone kernel
cd kernel
git checkout -t origin/android-goldfish-2.6.29

You can then copy your config to this directory and compile the kernel sources using

export ARCH=arm
export CROSS_COMPILE=/path/to/android/source/prebuilt/linux-x86/toolchain/arm-eabi-4.4.0/bin/arm-eabi-
make oldconfig
make -j<jobs>

To start the emulator using your custom kernel use the following command.

emulator -kernel /path/to/kernel/source/arch/arm/boot/zImage &

Vstr Library

strongSwan can be fully integrated in the Android build system. But the required Vstr string library can not (yet). Therefore, you will have to build that library first using droid-gcc.


Since droid-gcc is written in Ruby you'll obviously need Ruby installed on your build system. Then download droid-gcc by either cloning the Git tree or by downloading it directly.

If you used Git you can install droid-gcc using make install, if you downloaded it directly, you have to manually create two symlinks to droid-gcc named droid-gcc and droid-ld in a directory that is included in your PATH environment variable.

Build the Library

To simplify building the Vstr library, a build script is attached to this page ( The attached patch (vstr.patch) and Android Makefile ( are also required.

Download the three helper files to an appropriate working directory and then download and extract the tarball for the Vstr library.

tar xjf vstr-1.0.15.tar.bz2

Adjust the variables in the build script (DROID_ROOT and optionally DROID_TARGET and INSTALLDIR). Make sure you specify DROID_ROOT as an absolute path.
Then build and install the it using

cd vstr-1.0.15
patch -p1 < ../vstr.patch
. ../


Optionally, libcurl can be used to fetch CRLs. It is required if you intend to build scepclient. You can build it the same way as the Vstr library above, that is, with droid-gcc.

Build the Library

As with the Vstr library a build script ( and an Android Makefile ( are attached to this page.

Download the helper files to an appropriate working directory, then download and extract the current source tarball of libcurl.

Adjust the variables in the build script (see above), and build and install it using

cd curl-x.x.x
. ../


Now you are ready to build strongSwan. Download the current tarball (or build it yourself from the strongSwan source tree) and extract it in DROID_ROOT/external.

If you changed INSTALLDIR in the build scripts above, you will have to change the top (or accordingly. You can also adjust the plugin list in the that file or enable/disable executables.

The executable you want to include in the system image (starter, charon, scepclient) have to be added to PRODUCT_PACKAGES in build/target/product/ The libraries are automatically installed.

Now just build the Android source tree.

cd /path/to/android/source