strongSwan on Android » History » Version 6
strongSwan on Android¶
The IKEv2 daemon charon has recently been ported to Google Android.
This document describes how to build strongSwan for Android 2.2 (using the emulator).
There is a patch that integrates strongSwan into the default Android VPN frontend.
Android Source Tree¶
You will need the complete Android source to build strongSwan. Instructions on how to download and build it can be found on the Android website.
To checkout a specific branch or tag of the sources, specify it with the
-b parameter when using the
repo init command.
Since building the whole source tree takes quite a while you should probably start with this first:
cd /path/to/android/source . build/envsetup.sh lunch 1 make
The prebuilt kernel that is used for the emulator lacks some modules required for strongSwan to work correctly. It is therefore required to build a custom kernel.
To get the current kernel config you can use the Android Debug Bridge to download it from the running emulator. After starting the emulator use
adb pull /proc/config.gz config.gzto copy the config to the current directory. Then enable the missing modules, this is mainly
CONFIG_INET_XFRM_MODE_TUNNELbut might include other modules.
Please compare your config to the list of required modules in this wiki (please note that some modules, especially all the IPv6 related modules, are not really required).
Clone the kernel sources and checkout an appropriate tag (check the version of the kernel in the emulator). For example:
git clone git://android.git.kernel.org/kernel/common kernel cd kernel git checkout -t origin/android-goldfish-2.6.29
You can then copy your config to this directory and compile the kernel sources using
export ARCH=arm export CROSS_COMPILE=/path/to/android/source/prebuilt/linux-x86/toolchain/arm-eabi-4.4.0/bin/arm-eabi- make oldconfig make
To start the emulator using your custom kernel use the following command.
emulator -kernel /path/to/kernel/source/arch/arm/boot/zImage &
If you used Git you can install droid-gcc using
make install, if you downloaded it directly, you have to manually create two symlinks to droid-gcc named droid-gcc and droid-ld in a directory that is included in your PATH environment variable.
Build the Library¶
Download the three helper files to an appropriate working directory and then download and extract the tarball for the Vstr library.
wget http://download.strongswan.org/vstr-1.0.15.tar.bz2 tar xjf vstr-1.0.15.tar.bz2
Adjust the variables in the build script (
DROID_ROOT and optionally
INSTALLDIR). Make sure you specify
DROID_ROOT as an absolute path.
Then build and install the it using
cd vstr-1.0.15 patch -p1 < ../vstr.patch . ../vstr.build
Now you are ready to build strongSwan. Download the current tarball (or build it yourself from the strongSwan source tree) and extract it in
If you changed
INSTALLDIR in the build script above, you will have to change the top Android.mk (or Android.mk.in) accordingly. You can also adjust the plugin list in the that file.
Now just build the Android source tree.
cd /path/to/android/source make