Project

General

Profile

Issue #3180

how to configure one remote ip in passthrough connection

Added by zhonghai li about 1 year ago. Updated about 1 year ago.

Status:
Closed
Priority:
Normal
Category:
configuration
Affected version:
5.3.5
Resolution:
No feedback

Description

hi,

we have network topology below.
after ipsec tunnel established, all traffic of client go through the tunnel since other ts is 0.0.0.0/0 from secgw.
now we need a passthrough connection to make sure traffic to pc(192.168.10.200) not go into tunnel.
we try to do as below, but it not works.
please indicate me how to write this conn.

conn passthrough1
leftsubnet="0.0.0.0/0"
rightsubnet="192.168.10.200/32"

client(192.168.0.101) ---- (wan 192.168.0.100)secgw(lan 192.168.3.100) ---- private-node(192.168.8.11) |
localgw(192.168.0.253) |
pc(192.168.10.200)

zhonghai li

History

#1 Updated by Tobias Brunner about 1 year ago

  • Category set to configuration
  • Status changed from New to Feedback

Please refer to the example configs.

#2 Updated by Tobias Brunner about 1 year ago

  • Status changed from Feedback to Closed
  • Assignee set to Tobias Brunner
  • Resolution set to No feedback

Also available in: Atom PDF